| Category : | Stainless Steel Force Washer/Through Hole Load Cell |
| Capacity (kg) : | 5100 |
| IP Rating : | IP66 |
| Cable length / Connector (m) : | 2 |
| Connection to Load Cell : | Integral Cable
|
| Connection to Amplifier : | 4 Wire Open End
|
| Connection : | 4 Wire PVC Cable via Cable Gland
|
| Cable Material / Mated Cable : | PVC |
| Material : | SUS |
| Mounting : | Thru hole Ø12.2 x Ø21.3
|
| Load Direction : | Compression |
| Safe Overload (% of RO) : | 150 |
| Rated Output (mV/V) : | 1.5 |
| Nonlinearity (% of RO) : | 1.50 |
| Nonrepeatability (% of RO) : | 1.0 |
| Hysteresis (% of RO) : |
|
| Excitation (VDC or VAC) : | 10 |
| Bridge Resistance : | 700 Ohm
|
| Insulation Resistance : | >500 MOhm @ 100 VDC |
| Operating Temperature : | -20 to +70°C |
| Compensated Temperature : | -10 to +60°C
|
| Temperature Shift Zero : | <+/-0.03% of Load/°C
|
| Temperature Shift Span : | <+/-0.03% of Load/°C |
| Calibration (Standard) : | 5-pt Compression
|
Calibration (Available) :
|
|
| Outer Diameter (mm) : | 38 |
| Height (mm) : | 15 |
| Width (mm) : |
|
| Internal Diameter (mm) : | 12.2
|
| Length (mm) : |
|
