EchoPod® DL34 Multi-Function Ultrasonic Level Transmitter

DOWNLOADS
 

Application

The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0’ (5.5m) with a 4-20 mA signal output, and is configured via our free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for day tank, skid, IBC, sump and process tank level applications.

Features

 Level detection, switch and control functions up to18.0’ (5.5m)

 Configuration is fast and easy via WebCal software and USB adapter

 Narrow 3” beam width and short 8” dead band optimized for bulk tanks

 Four programmable relays for switch, pump or valve control and fail-safety

     1 pump or valve with 3 alarms

     2 pumps lead-lag with 2 alarms

     2 pumps duplexing with 2 alarms

     4 independent switch point alarms

 PVDF transducer and 6P polycarbonate enclosure for corrosive liquids

 Automatic temperature compensation for accurate measurement
 

Specifications

Range: 18.0’ (5.5m)
Accuracy: ± 0.2% of range
Resolution: 0.079” (2mm)
Dead band: 8” (20cm)
Beam width: 3” (7.62cm)
Configuration: WebCal® PC Windows®, USB 2.0
Supply voltage: Non-volatile
Display type: 24 VDC (loop)
Consumption: 0.5W
Loop resist.: 400Ω max
Signal output: 4-20 mA, two-wire
Signal invert:: 4-20 mA or 20-4 mA
Signal fail-safe: 4 mA, 20 mA, 21 mA, 22 mA or hold last
Contact type: (4) SPST relays
Contact rating: 60 VA, 1A maximum
Contact fail-safe: Power loss: Hold last, Echo loss: Open, close or hold last
Hysteresis: Selectable
Process temp.: F: 20° to 140°, C: -7° to 60°
Temp. comp.: Automatic
Ambient temp.: F: -31° to 140°, C: -35° to 60°
Pressure: MWP = 30 PSI (2 bar)
Enclosure rating: Type 6P, encapsulated, corrosion resistant & submersible
Encl. material: Polycarbonate
Trans. material:  PVDF
Cable jacket mat.: Polyurethane
Cable type: 9-conductor, shielded
Cable length: 48” (1.2m)
Process mount: 2” NPT (2” G)
Mount gasket: Viton®
Mount gasket: General purpose
Compliance: CE, RoHS
Approvals: cFMus
 
 

 

Product and Technology News

Pressure and Temperature Transmitter

Download Catalogue