• pdf_16x16 PID Control
    pdf_16x16 Signal Conditioning
    pdf_16x16 Data Acquisition
    pdf_16x16

    Tank Contents

    Measurement

    zip Config Software
     
    Key Features
     
    The solution for PID Control, Condition Monitoring, Signal Conditioning, Alarm Trips and Remote Data Acquisition.
    Standard TS35 DIN rail mounted
    Genuine single loop integrity to decrease the risk of process interruption.
    Fully configurable by PC software - no internal links or potentiometers.
    Real time data through RS485 serial interface.
    Accurate measurement of a wide range of industrial sensors and signals
    20bit Measurement.
    22.5mm wide enclosure enables high packing density.
     
    Tracker 300+ Configuration is via the RS485 interface or by using a USB cable which plugs into the front panel "Config" socket. There are no internal links or potentiometers. Each unit can be identified by a unique six character alpha numeric tag name which is then stored in the instrument's memory.
     
    The Windows based PC software allows you to name and store full configuration and calibration setup files for future use. You are able to print the Tracker 300 configuration that is supplied with each unit prior to installation. You can also test the Tracker 300 with our free SCADA software. If you wish to know more about PID control you can view our article on how a PID controller works.
     
    Feature Tracker 321 Tracker 331 Tracker 332
    Universal Input for Thermocouples, RTD, mV, Volts and mA simple_tick simple_tick simple_tick
    RS485 Communications, 4 protocols including Modbus RTU simple_tick simple_tick simple_tick
    Genuine single loop integrity for critical plant control systems simple_tick simple_tick simple_tick
    10V / 24V DC sensor excitation supply simple_tick simple_cross simple_tick
    Universal 90-265V AC supply simple_tick simple_tick simple_tick
    Communication loss “self protection” modes simple_tick simple_tick simple_tick
    Math Functions – User Linearisation, Max/Min Tare, Square Root simple_tick simple_tick simple_tick
    Auto Tune PID or On/Off control simple_cross simple_tick simple_tick
    One Relay and one SSR output (can be for alarms or PID control) simple_cross simple_tick
    Reverse, Direct and Heat + Cool control actions simple_cross simple_tick simple_tick
    Pulse Width Modulation (PWM) logic control outputs simple_cross simple_tick Using T340
    Partial load and load condition monitoring simple_cross simple_tick simple_tick
    Thermocouple condition monitoring simple_tick simple_tick simple_tick
    Option: 24 V AC/DC Supply simple_tick simple_tick simple_tick
    Option: Analogue output (used for measurement re-transmission or PID control) simple_tick simple_tick simple_tick
    Option: Second relay output (replaces SSR Output) simple_cross simple_tick Using T340
    Option: 4 extra logic outputs (e.g. relays) and 2 logic inputs (Tracker 340 Series) simple_tick simple_tick simple_tick