KARI KARI PEL -ELEKTRODIANTURI + EL22

An excellent choice for a drilled well

KARI PEL is a thin, hanging dependent on the signal cable to the electrode, which is the best choice for a narrow space, such as a drilled well. It is suitable for versatile control of liquid levels, for example, start and stop functions of the pump.

KARI PEL forward the information to the fluid levels fluctuations KARI EL22 switch, which controls the functions desired. For example, when you want to prevent deep well pump running dry, PEL-electrodes are installed above the pump. KARI EL22 stop the pump before the possibility of dry running, and allows the launch, when the surface is once again a safe level.  

The pump start and stop levels are easy to identify and exchange

KARI PEL electrodes are suitable for filling and draining pumps control. The pump start and stop levels are easy to set up by placing the electrodes to the liquid surface heights, over and under which the liquid level must not rise and fall. The filling and discharge connections are easy to replace changeover. 
 

KARI HSPE - shielded electrode cable for long distances

We recommend the use of shielded KARI HSPE -elektrodikaapelin when a high voltage cable and electrode leads run parallel in deep drilled wells, or other locations of more than 50 meters. The shielding to ensure KARI PEL electrodes for normal operation when the power cable can not be induced voltage to the electrode.