|
|
 |
|
|
Specifications of PFXSP5500TPD (Display) / PFXSP5B40 (Box Module)
Display Specifications
|
Display Type |
TFT Color LCD |
|
Display Size |
10.4” |
|
Resolution |
800 x 600 pixels (SVGA) |
|
Auto Scaling |
Yes |
|
Effective Display Area |
W211.2 x H158.4 mm(W8.31 x H6.24 in.) |
|
Display Colors |
16 million colors
For details about Display Colors, refer to the manual for your screen editing software. |
|
Backlight |
White LED
(Not user replaceable. When replacement is required, contact your local distributor.) |
|
Backlight Service Life |
50,000 hours or more (continuos operation at 25 °C [77 °F]
before backlight brightness decreases to 50% |
|
Brightness Control |
0...100 (Adjusted with touch panel or software) |
|
Brightness Sensor |
Yes |
Touch
Panel |
Type |
Resistive Film (analog, multi-touch) |
|
Resolution |
1,024 x 1,024 |
|
Service Life |
1 million times or more |
Electrical Specifications
Power
Supply |
Rated Input Voltage |
12...24 Vdc |
|
Input Voltage Limits |
I10.8...28.8 Vdc |
|
Voltage Drop |
12 Vdc: 1.25 ms or less
24 Vdc: 5 ms or less |
Power Consumption
(Primary Power Supply
[including power loss]) |
Max. 50 W |
|
In-Rush Current |
30 A or less |
|
Voltage Endurance |
1,000 Vac, 20 mA for 1 minute (between charging and FG terminals) |
|
Insulation Resistance |
500 Vdc, 10 MΩ or more (between charging and FG terminals) |
Environmental Specifications
International
Safety Standard |
 |
Physical
Environmen |
Surrounding
Air Temperature |
0...60 °C (32...140 °F) |
|
Storage Temperature |
-20...60 °C (-4...140 °F) |
Surrounding Air and
Storage Humidity |
10%...90% RH (Non condensing, wet bulb temperature
39 °C [102.2 °F] or less) |
|
Dust |
0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels) |
|
Pollution Degree |
For use in Pollution Degree 2 environment |
|
Corrosive Gases |
Free of corrosive gases |
Atmospheric Pressure
(Operating Altitude) |
800...1,114 hPa (2,000 m [6,561 ft] or lower) |
Mechanical
Environment |
Vibration
Resistance |
IEC/EN 61131-2 compliant
5...9 Hz Single amplitude 3.5 mm (0.14 in.)
9...150 Hz Fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.) |
|
Shock Resistance |
IEC/EN 61131-2 compliant
147 m/s2, X, Y, Z directions for 3 times |
Electrical
Environment |
Noise Immunity |
Noise Voltage: 1,000 Vp-p
Pulse Duration: 1 μs
Rise Time: 1 ns
(via noise simulator) |
Electrostatic
Discharge Immunity |
Contact Discharge Method: 6 kV (IEC/EN 61000-4-2 Level 3) |
NOTE: When using any of the options for this product, make sure to check the specifications for any special conditions or cautions that may apply to this product.
Memory
|
Application Memory |
Screen Size: 64MB *CFast card
|
|
Free Space: About 5GB*1 |
|
Backup Memory |
NVRAM 320 KB |
-
*1 You can install the applications you have used. As for hardware specifications, the CPU is Intel® AtomTM E6x0 1.3GHz (Single core/Dual thread)' and the main memory is 'DDR2 SDRAM 2GB'.
Interface Specifications(Display)
USB
(Type A)
Interface |
Connector |
USB 2.0 (Type A) x 1 |
Power Supply
Voltage |
5 Vdc ±5% |
Maximum Current
Supplied |
500 mA |
Maximum Transmission
Distance |
5 m (16.4 ft) |
USB
(mini-B)
Interface |
Connector |
USB 2.0 (mini-B) x 1 |
Maximum Transmission
Distance |
5 m (16.4 ft) |
Interface Specifications(Box Module)
Serial
Interface
COM1 |
Asynchronous
Transmission |
RS-232C/422/485 |
|
Data Length |
7 or 8 bits |
|
Stop Bit |
1 or 2 bits |
|
Parity |
None, odd, or even |
Data Transmission
Speed |
2,400(1,200)...115,200 bps |
|
Connector |
D-Sub 9 pin (plug) |
Serial
Interface
COM2 |
Asynchronous
Transmission |
RS-232C/422/485 |
|
Data Length |
7 or 8 bits |
|
Stop Bit |
1 or 2 bits |
|
Parity |
None, odd, or even |
Data Transmission
Speed |
2,400(1,200)...115,200 bps |
|
Connector |
D-Sub 9 pin (plug) |
USB
(Type A)
Interface |
Connector |
USB 2.0 (Type A) x 3 |
Power Supply
Voltage |
5 Vdc ±5% |
Maximum Current
Supplied |
500 mA/port,
1 A total for 3 ports |
Maximum Transmission
Distance |
5 m (16.4 ft) |
USB
(mini-B)
Interface |
Connector |
USB 2.0 (mini-B) x 1 |
Maximum Transmission
Distance |
5 m (16.4 ft) |
Ethernet
Interface |
Standard |
IEEE802.3i/IEEE802.3u/IEEE802.3ab,
10BASE-T/100BASE-TX/1000BASE-T |
|
Connector |
Modular jack (RJ-45) x 2 |
SD Card
Interface |
SD Card |
SD Card Slot(Storage) x 1 |
CFast Card
Interface |
CFast Card |
CFast Card Slot(System) x 1
CFast Card Slot(Storage) x 1 |
Expansion Unit
Interface |
Expansion Unit |
Fieldbus Unit x 1 |
Video
Interface |
DVI-D |
DVI-D OUT |
|
Connector |
DVI-D 24 pin(socket) x 1 |
Sound Input
Interface |
Sound Input |
MIC or LINE input(software switch) |
|
Connector |
MINI-JACK ∅3.5 x 1 |
Sound Output
Interface |
Speaker Output |
300 mW (Rated Load: 8 Ω,
Frequency: 1 kHz) |
|
LINE Output |
Rated load: 10 kΩ or more |
|
Connector |
2-piece terminal block (AUX) x 1 |
AUX Output
Interface |
AUX Output |
Alarm Output/Buzzer Output |
|
Rated Voltage |
24 Vdc |
|
Rated Current |
50 mA or less |
|
Connector |
2-piece terminal block (AUX) x 1 |
Structural Specifications
|
Grounding |
Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire,
or your country’s applicable standard (same for FG and SG terminals). |
|
Cooling Method |
Natural air circulation |
|
Structure *2 |
When using a factory-installed front USB cover: IP65F, IP67F.
When using a front USB cover as an option: IP66F, IP67F, Type 4X (Indoor Use Only)/13
* The front face of this product when properly installed in an enclosure and
not using the front panel USB port.
NOTE: The option is a front USB cover with screw manufactured by Pro-face
(Model Number PFXZCDCVUS1). |
|
External Dimensions |
W272.5 x H214.5 x D67 mm (W10.73 x H8.44 x D2.64 in.) |
|
Panel Cut Dimensions |
W259 x H201 mm (W10.2 x H7.91 in.)*3
Panel thickness area:1.6...5 mm (0.06...0.2 in.)*4 |
|
Weight *5 |
3.6 kg (7.88 lb) or less |
-
*2 The front face of this product, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification.
-
*3 For dimensional tolerance, everything +1/-0 mm (+0.04/-0 in.) and R in angle are below R3 (R0.12 in.)
-
*4 Even if the installation wall thickness is within the recommended range for the “Panel Cut Dimensions”, depending on wall’s material, size, and installation location of this product and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.
-
*5 The weight for the combined unit of Box Module and Display Module equals the sum of the weight for the Modules.
External Dimensions
Display module and box module combination
Panel Cut-out
|
Model Name |
A |
B |
C |
|
SP-5500TP |
259 (+1/-0)
[10.2 (+0.04/-0)] |
201 (+1/-0)
[7.91 (+0.04/-0)] |
1.6...5 mm
(0.06...0.2 in.) |
External Dimensions with cables
|
*1 Rotation area of the fastener
*2 Pitch of center of installation fastener screws |
|
|
|
