Orbit® Digital Probes with In Line Connector - Specification

Orbit®3 Digital Gauging Probes (with connector between probe and electronics module)

Orbit® 3 Digital Gauging Probes
Product
Spring Push Axial Cable	DP/1/S	DP/2/S	DP/5/S	DP/10/S	DP/20/S	D6P/2/S
Spring Push Radial Cable	DPR/1/S	DPR/2/S	DPR/5/S	DPR/10/S	DPR/20/S	N/A
Pneumatic Axial Cable	N/A	DP/2/P	DP/5/P	DP/10/P	DP/20/P	N/A
Pneumatic Radial Cable	N/A	DPR/2/P	DPR/5/P	DPR/10/P	DPR/20/P	N/A
Measurement Range (mm)	1	2	5	10	20	2
Body Diameter	8h6					6h6

Performance
Accuracy (% of Reading) (1)	0.2		0.15			0.2
Repeatability μm (2)	0.15
Resolution μm -user selectable	<0.01		<0.05		<0.1	<0.01
Reading Rate	3906 readings per second
Bandwidth of Electronics (Hz) user selectable	460, 230, 115, 58, 29, 14, 7,4
Orbit® 3 Electronics Interface	USB, Ethernet, RS232
Pre Travel (mm)	0.15
Post Travel (mm)	0.35	0.85				0.35
Tip Force (N) at Middle of Range ±20%
Spring Push	0.7
Pneumatic at 0.4 bar	N/A	0.8	0.85	0.7		N/A
Pneumatic at 1 bar	N/A	2.8		2.5		N/A

Environmental
Sealing for Probe	IP65 with gaiter or IP50 without gaiter
Sealing for Probe Interface Electronics	IP43, (In line connector: IP67)
Storage Temperature (ºC)	-20 to +70
Probe Operating Temperature with Gaiter (ºC)	+5 to +50
Probe Operating Temperature without Gaiter (ºC)	-10 to +80
Electronics Operating Temperature (ºC)	0 to 60
EMC	Emissions EN61000-6-3
	Immunity EN61000-6-2
Power	5±0.25 VDC @ 0.06A typical

Material
Probe Body	Stainless Steel
Probe Tip (options)	Nylon, Ruby, Silicon Nitride, Tungsten Carbide
Gaiter (standard)	Fluoroelastomer
Cable	PUR
Electronics Module	ABS

[1] Accuracy 0.1μm or % reading, whichever greater

[2] Obtained by repeated operation against a carbide target with side load applied to bearing

Product and Technology News