| Category : | In Line Load Cell |
| Material : | SUS |
| Mouting Thread : | 1 1/2-12-Thread |
| Load Direction : | Tension & Compression |
| Connection to Load Cell : | 6 Pin Bendix Receptacle, (PT02A-10-6P) |
| Connection to Amplifier : | |
| Cable Length / connector (m) : | |
| Cable Material / Mated cable : | |
| Nonlinearity (% of RO) : | 0.2 |
| Hysteresis (% of RO) : | 0.2 |
| Nonrepeatability (% of RO) : | 0.1 |
| Rated Output (mV/V) : | 2 |
| Safe Overload (% of RO) : | 150 |
| Outer Diameter (mm) : | 50.3 |
| Height (mm) : | 152.4 |
| Width (mm) : | |
| Internal Diameter (mm) : | |
| Length (mm) : | |
| Excitation (VDC or VAC) : | 18 max |
| Bridge Resistance : | 350 Ohm nom |
| Insulation Resistance : | ≥500 MOhm @ 50 VDC |
| IP Rating : | IP64 |
| Operating Temperature : | -42 to 93°C |
| Compensated Temperature : | 15 to 72°C |
| Temperature Shift Zero : | 0.01% of RO/°C |
| Temperature Shift Span : | 0.01% of Load/°C |
| Calibration (standard) : | 5-pt tension |
| Calibration (available) : | 5-pt compression |
| Special : | TEDS (IEEE1451.4) Recognition w/ Auto Recognition Chip |
| Description : | LCM550 , 50000 lb , Threaded Rod Load Cell , Material - 17-4 PH S.S. , 1 1/2-12-Thread , TEDS (IEEE1451.4) Recognition , 6 Pin Bendix Receptacle, PT02A-10-6P w/ Auto Recognition Chip |