FUTEK

LSB200 / QSH01562

Category : Miniature S Beam Load Cell
Material : Aluminum
Mouting Thread : #4-40-Thread
Load Direction : Tension & Compression
Connection to Load Cell : Integral Cable
Connection to Amplifier : 4 Wire open end
Cable Length / connector (m) : 3.048
Cable Material / Mated cable : Silicone
Nonlinearity (% of RO) : 0.1
Hysteresis (% of RO) : 0.1
Nonrepeatability (% of RO) : 0.05
Rated Output (mV/V) : 2
Safe Overload (% of RO) : 1000
Outer Diameter (mm) :  
Height (mm) : 19
Width (mm) : 6.7
Internal Diameter (mm) :  
Length (mm) : 17.5
Excitation (VDC or VAC) : 10 max
Bridge Resistance : 350 Ohm nom
Insulation Resistance : ≥500 MOhm @ 50 VDC
IP Rating : IP40
Operating Temperature : -50 to 93°C
Compensated Temperature : 15 to 72°C
Temperature Shift Zero : 0.018% of RO/°C
Temperature Shift Span : 0.036% of Load/°C
Calibration (standard) : 5-pt tension
Calibration (available) : 5-pt compression
Special :  
Description : LSB200 , 10 lb , JR S-Beam Load Cell , Material - 2024-T4 , #4-40-Thread , Overload Protection , 29 Awg 4 Conductor Spiral Shielded Silicone Cable , 10" Long mated to 5 position Molex Connector (P/N 0050579405)
View Full Details >>