| Category : | Pedal Force Load Cell |
| Material : | SUS |
| Mouting Thread : | |
| Load Direction : | Compression |
| Connection to Load Cell : | Integral Cable |
| Connection to Amplifier : | 4 Wire open end |
| Cable Length / connector (m) : | 4.572 |
| Cable Material / Mated cable : | PVC |
| Nonlinearity (% of RO) : | 0.25 |
| Hysteresis (% of RO) : | 0.25 |
| Nonrepeatability (% of RO) : | 0.1 |
| Rated Output (mV/V) : | 2 |
| Safe Overload (% of RO) : | 150 |
| Outer Diameter (mm) : | 65.5 |
| Height (mm) : | 16.5 |
| Width (mm) : | |
| Internal Diameter (mm) : | |
| Length (mm) : | |
| Excitation (VDC or VAC) : | 20 max |
| Bridge Resistance : | 700 Ohm nom |
| Insulation Resistance : | ≥500 MOhm @ 50 VDC |
| IP Rating : | IP64 |
| Operating Temperature : | -50 to 93 °C |
| Compensated Temperature : | 15 to 72°C |
| Temperature Shift Zero : | 0.018% of RO/°C |
| Temperature Shift Span : | 0.018% of Load/°C |
| Calibration (standard) : | 5-pt compression |
| Calibration (available) : | |
| Special : | |
| Description : | LAU220 , 300 lb , Pedal Force Sensor , Standard , Material - 17-4 PH S.S. , 24 Awg 4 Conductor Braided Shielded PVC Cable , 15 ft Long |