| Category : | Submersible S-Beam Load Cell |
| Material : | SUS |
| Mouting Thread : | M3x0.5-Thread |
| Load Direction : | Tension & Compression |
| Connection to Load Cell : | Integral Cable |
| Connection to Amplifier : | 4 Wire open end |
| Cable Length / connector (m) : | 1.524 |
| Cable Material / Mated cable : | Silicone |
| Nonlinearity (% of RO) : | 1 |
| Hysteresis (% of RO) : | 1.5 |
| Nonrepeatability (% of RO) : | 0.05 |
| Rated Output (mV/V) : | 2 |
| Safe Overload (% of RO) : | 1000 |
| Outer Diameter (mm) : | |
| Height (mm) : | 19.1 |
| Width (mm) : | 6.4 |
| Internal Diameter (mm) : | |
| Length (mm) : | 16 |
| Excitation (VDC or VAC) : | 10 max |
| Bridge Resistance : | 1000 Ohm nom |
| Insulation Resistance : | ≥500 MOhm @ 50 VDC |
| IP Rating : | IP68 |
| Operating Temperature : | -17 to 72°C |
| Compensated Temperature : | 15 to 72°C |
| Temperature Shift Zero : | 0.04% of RO/°C |
| Temperature Shift Span : | 0.08% of Load/°C |
| Calibration (standard) : | 5-pt tension |
| Calibration (available) : | 5-pt compression |
| Special : | |
| Description : | LSB210 , 100 lb , JR. S-Beam Load Cell , Submersible Version , Material - 17-4 PH S.S. , M3x0.5-Thread , Submersible , 29 Awg 4 Conductor Spiral Shielded Silicone Cable , 5 ft Long |
