FUTEK

LSB210 / QSH00555

Category : Submersible S-Beam Load Cell
Material : Aluminum
Mouting Thread : M3x0.5-Thread
Load Direction : Tension & Compression
Connection to Load Cell : Integral Cable
Connection to Amplifier : 4 Wire open end
Cable Length / connector (m) : 1.524
Cable Material / Mated cable : Silicone
Nonlinearity (% of RO) : 1
Hysteresis (% of RO) : 1.5
Nonrepeatability (% of RO) : 1
Rated Output (mV/V) : 2
Safe Overload (% of RO) : 1000
Outer Diameter (mm) :
Height (mm) : 19.1
Width (mm) : 6.4
Internal Diameter (mm) :
Length (mm) : 16
Excitation (VDC or VAC) : 10 max
Bridge Resistance : 1000 Ohm nom
Insulation Resistance : ≥500 MOhm @ 50 VDC
IP Rating : IP68
Operating Temperature : -17 to 72°C
Compensated Temperature : 15 to 72°C
Temperature Shift Zero : 0.04% of RO/°C
Temperature Shift Span : 0.08% of Load/°C
Calibration (standard) : 5-pt tension
Calibration (available) : 5-pt compression
Special :
Description : LSB210 , 10 lb , JR. S-Beam Load Cell , Material - 2024-T4 , M3x0.5-Thread , Submersible , 29 Awg 4 Conductor Spiral Shielded Silicone Cable , 5 ft Long
View Full Details >>