FUTEK

LSM400 / FSH00984

Category : Single Point Load Cell
Material : Aluminum
Mouting Thread : #10-32-Thread
Load Direction : Tension & Compression
Connection to Load Cell : Integral Cable
Connection to Amplifier : 4 Wire open end
Cable Length / connector (m) : 3.048
Cable Material / Mated cable : Teflon
Nonlinearity (% of RO) : 0.05
Hysteresis (% of RO) : 0.05
Nonrepeatability (% of RO) : 0.01
Rated Output (mV/V) : 2
Safe Overload (% of RO) : 150
Outer Diameter (mm) :  
Height (mm) : 25.4
Width (mm) : 6.4
Internal Diameter (mm) :  
Length (mm) : 60.5
Excitation (VDC or VAC) : 18 max
Bridge Resistance : 1000 Ohm nom
Insulation Resistance : ≥500 MOhm @ 50 VDC
IP Rating : IP20
Operating Temperature : -50 to 93°C
Compensated Temperature : 15 to 72°C
Temperature Shift Zero : 0.0018% of RO/°C
Temperature Shift Span : 0.0014% of Load/°C
Calibration (standard) : 5-pt tension
Calibration (available) : 5-pt compression
Special :  
Description : LSM400 , 100 lb , Mini Beam Load Cell , Standard , Material - 2024-T4 , #10-32-Thread , 29 Awg 4 Conductor Spiral Shielded Teflon Cable , 10 ft Long
View Full Details >>