DOWNLOADS |
Fully automatic surface inspection of painted automobile attachmentsA perfectly painted surface is every car's staple feature. Thus the quality requirements for painted parts attached to the car body are the same as with the body itself. Objective inspection is possible with the reflectCONTROL PSS 8005.D robot-assisted inspection system for large and complex attachments such as bumpers. The defects are measured laterally and in depth and classified on the basis of catalogs and optionally marked during robot-based inspection with the automationCONTROL 8005 PSS 8005.M system using ATENSOR-LS1 technology*. This way, follow-up work and process improvements can be performed precisely as required and easily. Benefits:
Material parameters:
*ATENSOR LS1 technology = robotic process automation for products with a high number of versions, which makes manual robot programming impossible. With the ATENSOR-LS1 (LS1 = lot size 1), robot programmes are dynamically generated on the basis of measurements. The programmes are then loaded and run in the robot memory.
|
PSS 8005.D The reflectCONTROL PSS 8005.D system uses robot-controlled sensors that inspect shiny surfaces on the principle of the phase-shifting deflectometry. The robot tracks are defined offline by simulation with the aid of CAD data of the objects being inspected. Optionally, automatic defect marking can be performed with the automationCONTROL PSS 8005.M system. Special features:
|
back to product group "Painting and paint inspection" |