FUTEK

LSB200 / QSH01738

Category : Miniature S Beam Load Cell
Material : SUS
Mouting Thread : M3x0.5-Thread
Load Direction : Tension & Compression
Connection to Load Cell : Integral Cable
Connection to Amplifier : 4 Wire open end
Cable Length / connector (m) : 0.3048
Cable Material / Mated cable : Silicone
Nonlinearity (% of RO) : 0.1
Hysteresis (% of RO) : 0.1
Nonrepeatability (% of RO) : 0.05
Rated Output (mV/V) : 2
Safe Overload (% of RO) : 1000
Outer Diameter (mm) :  
Height (mm) : 19.1
Width (mm) : 6.7
Internal Diameter (mm) :  
Length (mm) : 17.5
Excitation (VDC or VAC) : 10 max
Bridge Resistance :  
Insulation Resistance : ≥500 MOhm @ 50 VDC
IP Rating : IP40
Operating Temperature : 0 to 71°C
Compensated Temperature : -11 to 45°C
Temperature Shift Zero : 0.036% of RO/°C
Temperature Shift Span : 0.036% of Load/°C
Calibration (standard) : 5-pt tension
Calibration (available) : 5-pt compression
Special :  
Description : LSB200 , 2500 g , JR S-Beam Load Cell , Material - 17-4 PH S.S. , M3x0.5-Thread , Overload Protection , 29 Awg 4 Conductor Spiral Shielded Silicone Cable , 1 ft Long w/ 4 Pin Lemo Receptacle - PHG.0B.304.CLLD (CC4)
View Full Details >>