Product Configuration

Print

optoNCDT ILD1220-10

Brand : Micro-Epsilon
Type : Laser Sensor
Model : optoNCDT ILD1220-10
Measuring ranges : 10 mm
Start of measuring range : 20 mm
Mid of measuring range : 25 mm
End of measuring range : 30 mm
Linearity : < ±10 µm
Repeatability : 3.7 µm
Temperature stability :±0.015% FSO/K
Protection class : IP65
Supply voltage : 11 … 30 VDC
Power consumption : < 2 W (24 V)
Measuring rate : 2 kHz / 1 kHz / 0.5 kHz / 0.25 kHz
Light source : Semiconductor laser < 1 mW, 670 nm (red)
Signal input : 1 x HTL laser on/off;
                      1 x HTL multifunction input: trigger in / zero setting / teach
Switching output : 1 x error output: npn, pnp, push pull
Digital interface : RS422 (16bit)
Analog output : 4 ... 20 mA (12 bit)
 

Sub Components

PS2020

Power supply unit (all optoNCDT series)

Input 100-240 VAC 

Output 24 VDC / 2.5 A

mounting onto symmetrical standard rail 35 mm x 7.5 mm, DIN 50022



Add

IF2030/ENETIP

Interface module for Industrial Ethernet connection

The IF2030 interface modules are designed for easy connection of

Micro-Epsilon sensors to Ethernet-based fieldbuses, e.g., plant control systems. The PROFINET and Ethernet/IP modules are compatible with sensors that output data via an RS422 or RS485 interface. These modules operate on the sensor side with up to 4 MBd and have two network connections for different network topologies. Installation in control cabinets is via a DIN rail.

Add

IF2030/PNET

Interface module for Industrial Ethernet connection

The IF2030 interface modules are designed for easy connection of

Micro-Epsilon sensors to Ethernet-based fieldbuses, e.g., plant control systems. The PROFINET and Ethernet/IP modules are compatible with sensors that output data via an RS422 or RS485 interface. These modules operate on the sensor side with up to 4 MBd and have two network connections for different network topologies. Installation in control cabinets is via a DIN rail.

Add

IC2001/USB

IC2001/USB Single-channel converter cable RS422/USB

The IC2001/USB single-channel converter cable is used for the USB connection of optoNCDT sensors equipped with an RS422 interface. The cable is easy to assemble and can therefore also be used for installation in machines and systems. 

Special features 

- 5-core interface cable without outer shield 

- Conversion from RS422 to USB 

- Easy sensor connection via USB 

- Supports baud rates from 9.6 kBaud to 1 MBaud

Add

IF2001/USB

IF2001/USB converter RS422 to USB 

The RS422/USB converter transforms digital signals from a laser-optical sensor into a USB data packet. The sensor and the converter are connected via the RS422 interface of the converter. Data output is done via USB interface. The converter loops through further signals and functions such as laser on/off, switch signals and function output. The connected sensors and the converter can be programmed through software. 

 Special features 

- Robust aluminum housing 

- Easy sensor connection via screw terminals (plug & play) 

- Conversion from RS422 to USB 

- Supports baud rates from 9.6 kBaud to 12 MBaud

Add

IF2035-PROFINET

Interface module for PROFINET connection of a Micro-Epsilon sensor with RS485 or RS422 interface, suitable for PCF1420-x/I or PCF1420-x/U cables, top-hat rail housing, incl. GSDML file for software integration in the PLC

Add

IF2035-EIP

Interface module for connection of Micro-Sensors with RS422/RS485 interface to Ethernet/IP 1-channel system with DIN rail housing Software integration into the PLC with EDS file Certified according to Ethernet/IP CT16

Add

IF2035-EtherCAT

Interface module for EtherCAT connection of a Micro-Epsilon sensor with RS485 or RS422 interface, suitable for PCF1420-x/I or PCF1420-x/U cables, top-hat rail housing, incl. ESI file for software integration in the PLC

Add

Protective film

Protective film

Transparent protective film 32 x 11 mm for ILD1x20

Add