FUTEK

LAU200 / FSH00221

Category : Pedal Force Load Cell
Capacity : 100 lb
Material : SUS
Mouting Thread :  
Load Direction : Compression
Connection to Load Cell : Integral Cable
Connection to Amplifier : 4 Wire open end
Cable Length / connector (m) : 0.3048
Cable Material / Mated cable : Teflon
Nonlinearity (% of RO) : 0.2
Hysteresis (% of RO) : 0.2
Nonrepeatability (% of RO) : 0.2
Rated Output (mV/V) : 2
Safe Overload (% of RO) : 150
Outer Diameter (mm) : 50.3
Height (mm) : 9.8
Width (mm) :  
Internal Diameter (mm) :  
Length (mm) :  
Excitation (VDC or VAC) : 20 max
Bridge Resistance : 700 Ohm nom
Insulation Resistance : ≥500 MOhm @ 50 VDC
IP Rating : IP64
Operating Temperature : -50 to 93 °C
Compensated Temperature : 15 to 72°C
Temperature Shift Zero : 0.018% of RO/°C
Temperature Shift Span : 0.018% of Load/°C
Calibration (standard) : 5-pt compression
Calibration (available) :  
Special :  
Description : LAU200 , 100 lb , Accelerator Pedal Force Sensor , Includes Mounting Plate & Mating Cable/Connector Package , Material - 17-4 PH S.S. , 29 Awg 4 Conductor Spiral Shielded Teflon Cable , 1 ft Long w/ 4 Pin PHG.0B.304.CLLD Lemo Receptacle
View Full Details >>