SI-PROFINET-V2 allows the drive to communicate and interface with PROFINET PLCs and networks.
Features include:
Dual 100 BASE-TX RJ45 connectors with support for shielded twisted pair, full-duplex 100 Mbps connectivity with auto crossover correction
Integrated switches allow for use of line networks i.e. daisy chaining
Both ports operate in full duplex mode as a network switch PROFINET Real-time class RT_Class_1 and conformance class A
Cycle times from 2 ms to 512 ms specified during configuration
Automatic device replacement using the LLDP and DCP protocols
LED indication of network port activity
Up to 64 cyclic I/O module slots (maximum of 32 in and 32 out) configured by network configuration tool and GSDML file Identification and maintenance functions I&M0 to I&M4 supported
Drive Compatibility
The compatibility table below highlights which Control Techniques drives support this option module
Dual 100 BASE-TX RJ45 connectors with support for shielded twisted pair, full-duplex 100 Mbps connectivity with auto crossover correction
