Unidrive M700 Universal AC/Servo Drives

1.0 - 4,200 HP (0.75 kW – 2.8 MW)
208-240 V | 380-480 V | 575 V | 690 V

A key competence of Control Techniques is honing our unique motor control algorithms, taking pride in our craft as any good craftsman would. This ensures that our Unidrive M series drives offer the highest control stability and bandwidth for every industrial motor type.

Unidrive M enables maximum machine throughput in every application and with every motor, from standard AC induction motors to dynamic linear motors and from energy saving hybrid permanent-magnet motors to high performance servo motors.


To meet the needs of any application Unidrive M700 series is available in three variants:

  •  Unidrive M700: Onboard Ethernet and single STO input
  •  Unidrive M701: Onboard RS485 to upgrade from Unidrive SP, single STO input
  •  Unidrive M702: Onboard Ethernet, dual STO inputs
 
The drive for your industry and application
 
For Torque Control applications
  •  Precision torque control with up to 250 μs update rate
  •  Sensorless control of induction, permanent-magnet and hybrid PM motors
  •  98% efficient, minimal energy lost during the power conversion process
  •  Easy common DC bus configuration, dynamic braking, and regenerative mode
  •  Full spectrum of stand-alone, modular and pre-assembled drives up to 2.8MW (4,200 HP)
  •  On-board PLC to execute programs for logic and sequencing
 
For Speed Control applications
  •  Fully configurable S-ramps
  •  High bandwidth speed loop and switching frequencies supported up to 16 kHz
  •  Built-in, universal feedback interface supporting everything from resolvers to incremental and absolute encoders
  •  Stationary and rotary autotune algorithms for optimal motor control
  •  Low acoustic noise due to adjustable multi-speed fan and intelligent thermal management
  •  Integrated Safe Torque Off (STO) input(s), certified to SIL3 / PLe
 
For Position Control applications
  •  Effortless integration into PLC architectures with PLC Controlled Motion
  •  Built-in, 1.5 axis advanced motion controller with cam profiles, homing, and electronic gearbox
  •  Scalable integrated motion control reduces demand on, or can entirely replace, a central PLC
  •  Comprehensive motion safety functions, including over safe networks
  •  Support for virtually all control bus technologies, including traditional fieldbuses and serial communications
  • High power modular drives

    Unidrive M’s modular offering gives you never before seen flexibility in building compact, reliable high-power solutions. Paralleled together, Unidrive M can control asynchronous and synchronous motors up to 2.8 MW (4,200 hp). At the top of the modular drives range, the Frame 12 is a 500 kW (700 hp) single module that delivers unmatched power density, while keeping both footprint and system costs to a minimum. The Unidrive M modules can be paralleled together into a wide range of flexible solutions to solve all system needs, including Active Front End and multi-pulse rectifier configurations.

    Efficient system build

    Designing and building a high power drive cubicle takes immense engineering knowhow. Most people don’t have that expertise in-house, but we do. And we’ve put it all into our DFS freestanding drives. The cubicle system is designed to make the most of our high power modular drives, benefiting the applications that need them the most. The results are maximum energy efficiency in an ingress protected package. Our cubicle drives come pre-assembled, easy to set up, with all necessary system components included. Furthermore, we can ship your Freestanding drive to you with a very short lead time, saving weeks on typical industry standards.

 
Multi-Protocol
A single drive that does it all...

Control Techniques’ philosophy has always been to support innovators, regardless of which communications protocol they may use. It’s for them that we’ve developed the most flexible high performance drive platform on the market.

Having multiple protocols supported by one drive means that different systems can share one design, reducing engineering effort and complexity, and helping to rationalize inventory of parts and spares. But we didn’t stop there. Today Unidrive M series drives offer EtherNet/IP, Modbus/TCP, RTMoE and PROFINET RT as standard, on a single drive platform, simultaneously. With this, Unidrive M delivers even more performance and extends the range of supported applications and achievable topologies. Using only the standard on-board communications it is possible to connect an HMI via Modbus TCP/IP, simultaneously with a high performance connection to a central PLC using EtherNet/IP or PROFINET RT.

RTMoE

Real-Time Motion over Ethernet (RTMoE) is included as standard on Unidrive M700 and M702 drives. It provides synchronized communication between drives at 250 μs cycle time, using the Precision Time Protocol as defined by IEEE1588 V2. Inter-axis synchronization using RTMoE delivers the ability to implement complex, highly accurate electronic line-shaft applications without the need for a powerful PLC. All this functionality is at a fraction of the cost of other solutions available on the market today.
 

Traffic management

Every Ethernet based Unidrive incorporates dedicated network switches that allow the drives to be conveniently daisy chained together; reducing the system wiring cost and saving valuable panel space. Using these dedicated switches also means that traffic on the network is perfectly managed to prevent network overload and the inherent performance degradation that may otherwise bane similar systems.
 

Cost-optimized integration

The diagram below gives an illustration of the flexibility that Unidrive can bring, exploiting the high performancecost effective features of RTMoE simultaneously with the supervisory control offered by a traditional PLC.

 
  • Functional Safetyfunctional-safety

    All Unidrive M drives have integrated dual Safe Torque Off (STO) inputs, certified to SIL3 / PLe, providing an elegant and reliable safety solution. 
    The addition of an MiS210 safety option extends the built-in STO with the ability to safely monitor and/or restrict the scope of motion. 
    Safety functions include: STO, SBC, SOS, SS1, SS2, SLS, SSM, SLA, SDI, SLP & SES
    For maximum flexibility in the safety system architecture, the modules support both wired and network safety connections: CIP-Safety on EtherNet/IP and Safety over EtherCAT (FSoE).

 
 
Intuitive commissioning software
Connect software

Connect - Commissioning tool

Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance.

LEARN MORE       DOWNLOAD THE SOFTWARE

Advanced machine control
Machine-Control-Studio

Machine Control Studio - Programming tool

Control Techniques' Machine Control Studio provides a flexible and intuitive environment for programming new automation and motion control features.

LEARN MORE       DOWNLOAD THE SOFTWARE

Motion Control programming software

Download Software

PowerToools Studio - programming tool

Provides an unparalleled setup and commissioning experience to easily program Digitax HD or Unidrive M.

LEARN MORE
Oscilloscope Software

CT-Scope

CT Scope - software oscilloscope tool

Is a full-featured software oscilloscope for viewing and analyzing changing values within the drive.

LEARN MORE
Diagnostics Tool
Diagnostic tool app download

Diagnostic Tool

Diagnostic Tool is a fast and simple tool, which allows users of Control Techniques' drives to quickly solve any error codes that the drive may show.

DOWNLOAD THE APP

 
 

 


Please register here in order to access the download page.
Name: *
Email address: *
Company Name: *
Designation: *
Contact No: *
 
  * Please filled in the required details.