Flow velocity and water level can be measured simultaneously by one sensor! It can be used only by fixing the sensor to the bottom of a water channel. Large-scale constructions such as weir and pipe establishment are not needed.
Flow velocity and water level are consecutively measured by one sensor.
No weir or flume is needed.
It is easy to set the sensor using a fixing screw and mounting bracket.
All necessary settings are to enter the pipe diameter and water channel width. There is no difficult setting.
Even a high-speed flow of up to 6 m/sec can be measured.
A flow velocity (Doppler method) and water level (time flight) are consecutively measured through the ultrasonic wave transmitted from the sensor. The flow rate is calculated by setting the pipe diameter and water channel width.