KARI MS -SIILOKYTKINthe top surface of the detector materials Kekoontuvien |
|
Comprehensively upper surface of various materials kekoontuvien managementMS KARI -siilokytkin detector is designed for the upper surface of the silos, which are administered and kekoontuvia granular raw materials. Its operation is based on the increased cost of the float. When administered in a silo the raw material reaches the float and tilt it approximately 25 ° angle, the inside of the float switch starts and gives the upper limit of the alarm. When using the KARI MS -siilokytkintä in potentially explosive atmospheres, it must be connected to Ex-relay. The signal from each tilt directionKARI, the MS consists of the cable to the switch, which is within the close float.It is installed on the cable depend upon the silo close to the dispensing opening. When the agent reaches the float and the tilt angle of about 25 °, the upper limit of the switch to the alarm. The installation does not have to worry about the direction in which the float should rise in price, because KARI MS gives a signal to each of the tilt direction. Three product typesKARI MS is available in three different sähkökosketintavalla, which means it can be connected at all times correct use of the object, regardless of kosketintavasta. KARI MS1 to use a close (NO) contact pins and KARI MS2 opening (NC). KARI MS3 includes a change-over contact (CO), which makes it suitable for applications where it is not known pins. Each switch is tested before useKARI MS -siilokytkimet are high-quality, consistent quality and reliable. We will make every clutch complete operational testing prior to deployment. |
|