T24 COM Drivers (2023 32 bit + 64 bit) v 02.00 (Jan 12th)
These drivers are for use in your own software and are supported by development platforms capable of using COM DLLs.
Contains example code for VB6, VB.Net, C# and MS Excel.
Note that the installer installs to your Documents folder as programming environments cannot open and alter the source code if it was located in Program Files folder.
T24AdvDrvCOM.DLL
The DLL drivers provide a COM wrapper around the native Windows T24 drivers and will require installation of these as well.
These drivers have the same functionality of the standard Windows DLL drivers but package them up as OLE COM interfaces.
T24 Windows Drivers
T24 Windows Drivers (2022 32 bit + 64 bit) v 02.00 (Jan 24th)
These drivers are for use in your own software and are supported by development platforms capable of using native Windows DLLs.
Contains example code for VB6, PureBasic, C#, C++ and Python.
Note that the installer installs to your Documents folder as programming environments cannot open and alter the source code if it was located in ProgramFiles folder.
T24AdvDrvxx.DLL
The DLL drivers provide all the low level communications over USB or COM port to simplify communications with T24 modules. A T24 base station is required.
Along with thread-safe callbacks for Data Provider messages, Wake Requests there is also support for accessing the built in spectrum analyser data and support for the T24-SAf fast acquisition modules.
High level functions wrap up much of the complexity of T24 and allow:
Receipt of transmitted data
Pairing functions (including soft pairing)
Sleep and Wake control
Spectrum Analyser support
Reading and writing of device parameters
Control over base station channel changing
Supports system-wide RF channel changing
Handling Keep Awake and Stay Awake modes
Transmitting Data Provider messages
Note: This replaces the previous set of DLL and COM drivers that were only available in 32bit. Contact Mantracourt if you would like these older drivers.
T24 Quick View
What Does It Do?
Allows you to very quickly detect and view a T24 acquisition module.
Once detected the data can be viewed and logged to a CSV file.
With this software you can:
Detect or pair to a device
View the value on a large simulated LED display
Log the data to a CSV file
NOTE: Only works with USB base stations: T24-BSU, T24-BSd, T24-BSue and T24-BSi (if used in USB mode)
T24 Bulk Update Multiple Parameters
V 1.1.0
This application allows you to change some of the common parameters of acquisition modules just by pairing to a module.
You can optionally keep the same radio channel or change the module to a specified radio channel.
Currently supports: T24-SA, BWSHK, BW-S325, BW-S475, T24-VA, T24-IA, T24-RA and T24-TA.
You can change the TX Interval, Sample Time, Sleep Delay, Low Power Mode and RF Channel.
For unsupported modules you can still change the radio channel.
NOTE: This only works if the T24 Toolkit has already been installed!
T24LOG100 has been designed to allow the logging and visualisation of up to 100 channels of data from the T24 Wireless Telemetry range of sensor transmitters.
This software is FREEto download and allows users to build a visual representation of a system and assign live readings. The built in web server provides a summary view page to other computers, tablets, iPads and smart phones etc. using a standard browser.
A resizable window displays a table of up to 100 channels of data. Channels can be setup with user defined algorithms that can be used to calculate a multitude of maths functions. For example, a display can show the value from a single T24 transmitter module or the sum of multiple transmitters. Visual displays and audible alarms can indicate under and over range as well as loss in communications, low battery and error reports.
Once the display channels are defined the user can quickly build graphical pages showing the data in a variety of formats including digital display or bars. Up to eight pages can be defined and the pages easily navigated between. A variety of image formats can be imported, including JPG, GIF, PDF and DXF.
T24LOG100 can log on demand, at pre-set intervals, on entering and leaving a pre-set overload and during an overload. It creates a CSV file which can be loaded for analysis into software programs such as Microsoft Excel. JSON format data is also available on demand via the built in web server.
This software is also available with customised branding. It is provided with your choice of corporate branding, including company logo, colour scheme and contact information.
Centre of Gravity Function
The Centre of Gravity (COG) function found within T24LOG100 gives you the tools to quickly calculate and visualise centre of gravity from up to eight sources of weight data. Choose your weight data, specify the X and Y co-ordinates and let LOG100 do the work to calculate and display the position of COG. Used in Motorsports teams internationally for optimising car set up prior to competitions.
Key Features & Benefits
Free 100 channel software
Displays and logs data from up to 100 wireless sensor transmitters from our T24 wireless range
Mapping / graphical capabilities
Centre of Gravity (COG) function
Webserver offers remote viewing on iPads/tablets/smart phones and also supplies JSON data on demand
Create reports for your customers and develop custom projects
Windows 7, 8, 10, 11 (32 bit software runs on 32 bit or 64 bit OS)
Defined algorithms and maths function
Logging at timed intervals, manual or on overload / underload
Visual and audible alarms indicates over and under load
Visual alarm for low batteries and loss in communication
Zoom in to channel to see data trends and history
Quick & easy to install
Export and log data in CSV format
Centre of Gravity designer and functionality
Customisable logo and colour scheme for integrating into your brand is available