DOWNLOADS

Position tolerance of the weld for process optimization

 
 

The bearing tolerances of two welded plates, coils or belts are inspected in-line by the WSS8210. Therefore, it is ensured that the semi-products produced are only subject to be further processed if its tolerance corresponds as well as that welded objects can be adjusted in its position before bending in order that the tolerance can be guaranteed. Having the knowledge of the thermal deformations built and the shape of the welding seam, vital information regarding the welding parameters can be deduced. Therefore, the complete welding process can be controlled.

Benefits:

  • Optimization of the automatic welding process
  • Reduction of the downstream machining process
  • Avoids cost-intensive rejection
  • Precise documentation of production process without any interruption
 

WSS 8200.LLT

schweissnaht-278x190px

The WSS 8200.LLT works on the basis of the laser line triangulation . It can be used both on one side of the weld than on both sides. In the second case may be integrated for thickness measurement optionally a package.

Special features:

  • Profile frequency up to 4000Hz
  • Resolution 10µm
  • Length of the laser line up to 100 mm
 

WSS 8205.LLT

schweissnaht-278x190px

The WSS 8205.LLT is based on the laser line triangulation principle. The system inspects the weld seam parameters for defects such as undercuts and movements or the angle between the objects welded. In the case of complex geometry it can be operated by a robot. Entering CAD files, robot motions are automatically simulated which enable fully-automatically inspection. Additionally, Teach In of the tracks is offered by a master part.

Special features:

  • Profile frequency to 400Hz
  • Resolution 10µm
  • Laser line length to 100mm
 
back to product group "Measuring and inspection systems for metal"