Recommended Substitute
Model in use Comments
GLC150-SC41-XY32KF-24V

Logitouch Series

STN color LCD

 

 


Recommended Substitutes Comments Details
AGP3300-T1-D24-FN1M

GP3000 Series

panel cut-out size difference.

Attachment (CA4-ATM5-01) available

 Compare

[ Migration ] Replacing LT Type B/B+/C with GP-3300T/L

Specification Comparison

  LT Type B/B+/C GP-3300T/L
LT TypeA カラータイプ.jpg
GP-3300T.jpg

Panel cut-out size difference.
Attachment (CA4-ATM5-01) available
Model No. Type B+(Color) : GLC150-SC41-XY32KF-24V
Type B(Monochrome) : GLC150-BG41-FLEX-24V
Type B+(Monochrome) : GLC150-BG41-XY32KF-24V
Type C(Monochrome) : GLC150-BG41-RSFL-24V		 Color : AGP3300-T1-D24-FN1M
Monochrome : AGP3300-L1-D24-FN1M
Display Type（Color） STN Color LCD UP!
TFT Color LCD
Display Type（Monochrome） Monochrome blue mode LCD UP!
Monochrome LCD
Display Colors（Color） 64 colors UP!
65,536 colors (without blink)
16,384 colors (with blink)
Display Colors（Monochrome） Monochrome blue mode, 8 levels Monochrome, 16 levels
Display Resolution QVGA(320×240 pixels)
Panel Cutout Dimensions (mm) W191.5×H141.5mm W156×H123.5mm*1
External Dimensions (mm) W207×H157×D75.8mm W167.5×H135×D78mm
Touch Panel Type Resistive film (Matrix) NEW!
Resistive film (Analog)*1
Memory (Application) 1MB UP!
6MB
Memory (SRAM) 96KB UP!
320KB
Control Memory (Program) 128KB UP!
132KB
Control Memory (SRAM) 32KB UP!
64KB
Serial I/F (COM1) Type B : 
-
Type B+ : 
-
Type C : 
D-Sub25pin (plug)
RS-232C/422		 D-Sub9pin (plug)
RS-232C/422/485
Serial I/F (COM2) - D-Sub9pin (socket)
RS-422/485
Ethernet I/F - NEW!
10BASE-T/100BASE-TX
FLEX NETWORK I/F ✔
DIO I/F (COM1) Type B : 
-
Type B+ : 
DIO 32 points
Input : Sink/Source 16 points
Output : Sink 16 points
Type C : 
-		 -
CF Card I/F - NEW!
✔ *1
USB Host I/F - NEW!
✔(Type A) *1
Printer I/F - NEW!
USB *1
Alarm Output ✔ - *1

 

*1 There are some restrictions regarding replacement with recommended substitutes.

*2 When LT Type B+ is replaced with GP-3300T/L, the I/O units that were connected to LT Type B+ via the DIO interface before replacement are connected via a FLEX NETWORK interface. A FLEX NETWORK unit is required.

When the display unit type is changed to AGP-3300T/L-FN1M, the I/O setting at the time of using LT Type B/B+/C is all cleared.
Check the setting of the LT Type B/B+/C project file (*.prw) and allocate I/O to the GP-3300T/L project file again.

◆ FLEX NETWORK Interface Specifications

  LT Type B/B+/C GP-3300T/L
Communication Configuration 1:N
Connection Method Multi-Drop Connection
Max. Distance 200m/channel at 6Mbps
100m/channel at 12Mbps
Communication Method During cyclic period, distributed transmission, Half-duplex
Communication Speed 6Mbps/12Mbps (selectable)
Communication I/F Differential Method, pulse transfer resistance
Error Check Format, bit, or CRC-12 verification
Max. Number of Nodes 63 (max)
1008 I/O points
(depending on type of units used)		 Bit variable input : 512 points *1
Bit variable output : 512 points *1
Integer variable input : 128 points *2
Integer variable output : 128 points *2
(depending on type of units used)

 

*1 When using GP-Pro EX under Ver.2.50, Bit variable enables to input/output 256 points.

*2 When using GP-Pro EX under Ver.2.50, Integer variable enables to input/output 64 points.