PFXSTC6300TADDKE / PFXSTC6300TADDCE

Display Specifications
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Display Type TFT Color LCD
Display Size 5.7"
Resolution 640 x 480 pixels
Effective Display Area 115.2 x 86.4 mm (4.54 x 3.40 in)
Display Colors 262,144 colors
For details about display colors, refer to the manual of your screen editing software.
Backlight White LED (White LED (Not replaceable. Please contact customer support.))
Backlight Service Life 50,000 hours or more (continuous operation at 25 °C [77 °F] before backlight brightness decreases to 25%)
Brightness Control 16 levels (Adjusted with touch panel or software)
Touch Panel Type Resistive film (analog, single touch)
Touch Panel Resolution 1,024 x 1,024
Touch Panel lifetime  1,000,000 times or more
 
Electrical Specifications
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Rated Input Voltage 24 Vdc
Input Voltage Limits 19.2 to 28.8 Vdc
Voltage Drop 5 ms or less
Power Consumption  Max 11.3 W
When power is not supplied to external devices 8 W or less
When screen turns off the backlight
(Standby Mode)
5.6 W or less
In-Rush Current 30 A or less
Noise immunity Noise voltage: 1,000 Vp-p, pulse duration: 1 μs, rise time: 1 ns (via noise simulator)
Voltage Endurance 1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation Resistance 500 Vdc, 10 MΩ or more
 
Environmental Specification
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Certification CE, UL and cUL, UKCA, RCM, KC, ATEX, RoHS, WEEE
Ambient air temperature 0 to 50 °C (32 to 122 °F)
Storage Temperature -20 to 60 °C (-4 to 140 °F)
Ambient air and storage humidity 10%...90% RH (Non condensing, wet bulb temperature 39 °C  [102.2 °F] or less)
Dust 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Corrosive Gases Free of corrosive gases
Air pressure (altitude range)  800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)
Vibration Resistance IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Shock Resistance IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Electrical fasttransient/burst  IEC 61000-4-4
2 kV: Power port (display unit)
1 kV: Signal ports
Electrostatic Discharge Immunity Contact Discharge Method: 6 kV
Air Discharge Method: 8 kV
(IEC/EN61000-4-2 Level 3)
 
Structural Specification
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Grounding Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country’s applicable standard.
Cooling Method Natural air circulation
Structure*1 IP65F, UL 50/50E, Type 1, Type 4X (indoor use only), Type 13 (on the front panel when properly installed in an enclosure)
External Dimensions 169.5 x 137 x 60 mm
(6.67 x 5.39 x 2.36 in)
Panel Cut Dimensions  156 x 123.5 mm
(6.14 x 4.86 in)
Panel thickness area:1.6...5 mm (0.06...0.2 in)*2
Weight  0.8 kg (1.76 lb) or less

*1The front face of this product, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though this product's level of resistance is equivalent to these standards, oils that should have no effect on this product can possibly harm this product. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to this product for long periods of time. If this product's front face protection sheet or cover glass peels off, these conditions can lead to the ingress of oil into this product and separate protection measures are suggested. Also, if non-approved oils are present, they may cause deformation or corrosion of the front panel's cover. Therefore, prior to installing this product, be sure to confirm the type of conditions that will be present in this product's operating environment. If the installation gasket is used for a long period of time, or if this product and its gasket are removed from the panel, the original level of protection cannot be kept. To maintain the original protection level, be sure to replace the installation gasket regularly.

*2Even if the installation wall thickness is within the recommended range for the Panel Cut Dimensions, depending on the wall's material, size, and installation location of this product and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.

 
Interface Specification
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Serial (COM1)  Asynchronous Transmission: RS-232C/422/485,
Data Length: 7 or 8 bits,
Stop Bit: 1 or 2 bits,
Parity: None, Even or Odd,
Data Transmission Speed: 2,400 to 115,200 bps,
Connector: D-Sub 9 (plug)
USB(Type A)  Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA/port
Maximum transmission distance : 5 m [16.4 ft.]
USB (micro-B) Conforms to USB 2.0 (micro-B) x 1,
Maximum transmission distance : 5 m [16.4 ft]
Ethernet  IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX,
Connector: Modular jack (RJ-45) x 1

DIO

DIO Connector: 38 pin connector (Model number: CA7-DIOCN5-01)
Cable connection side:
Pin No. Signal name Pin No. Signal name
A1 IN1 B1 IN0 (CT0)*3
A2 IN3 B2 IN2 (CT1)*3
A3 IN5 B3 IN4 (CT2)*3
A4 IN7 B4 IN6 (CT3)*3
A5 IN9 B5 IN8
A6 IN11 B6 IN10
A7 IN13 B7 IN12
A8 IN15 B8 IN14
A9 NC B9 COM
A10 Sink: NC B10 Sink: +24 Vdc
Source: +24 Vdc Source: +24 Vdc
A11 Sink: 0 Vdc B11 Sink: 0 Vdc
Source: NC Source: 0 Vdc
A12 OUT1 (PLS1, PWM1)*4 B12 OUT0 (PLS0, PWM0)*4
A13 OUT3 (PLS3, PWM3)*4 B13 OUT2 (PLS2, PWM2)*4
A14 OUT5 B14 OUT4
A15 OUT7 B15 OUT6
A16 OUT9 B16 OUT8
A17 OUT11 B17 OUT10
A18 OUT13 B18 OUT12
OUT15 B19 OUT14

*3Signal names in parentheses () indicate the counter input used.

*4Signal names in parentheses () indicate the pulse output or PWM output used.

 
Digital Input Specifications
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Input terminal IN0...IN15
Rated voltage 24 Vdc
Maximum allowable voltage 28.8 Vdc
Input type Sink/Source Input
Rated current 2.25 mA
Input resistance 10.7 kΩ
Input points 16
Input points 1
Common design 16-point/1 common line
Operation range ON voltage 15...28.8 Vdc
OFF voltage 0...5 Vdc
ON current 2.25 mA
OFF current 1.0 mA or less
Filtering Normal input 0.5 ms x N (N is 0 to 40)
High-speed counter
(IN0, IN2, IN4, IN6)
None, 4 μs, or 40 μs
Input signal display No LED indicators
Status display None
Isolation Yes
External connection 38 pin connector (used with Output section)
Cable length Normal input Maximum 50 m (164 ft)
High-speed counter /
Pulse catch input (IN0, IN2, IN4, IN6)
Maximum 10 m (33 ft)
Input Circuit

(A) 24 Vdc External power supply
(B) Source type
(C) Sink type

 
 
Digital Output Specifications
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Input terminal OUT0...OUT3 OUT4...OUT15
Rated voltage 24 Vdc
Rated voltage range 20.4 Vdc...28.8 Vdc
Output type PFXSTC6300TADDKE: Sink output
PFXSTC6300TADDCE: Source output
Maximum load current 0.3 A/point, total 3.2 A
Minimum load current 1 mA 1 mA
 (Pulse/PWM output unavailable)
Output voltage drop 1.5 Vdc or less
Output delay time OFF to ON (With output at 24 Vdc, 200 mA) 5 μs or less 50 μs or less
ON to OFF (With output at 24 Vdc, 200 mA) 5 μs or less 50 μs or less
Type of output Transistor output
Common lines 2
Common design 8-point/1 common line x 2
External connection 38 pin connector (used with Input section)
Output protection type Output is unprotected
Output points 16
Output signal display No LED indicators
Status display None
Isolation Yes
External power supply For Signal: 24 Vdc
Cable length Normal input Maximum 150 m (492 ft)
Pulse/PWM output Maximum 5 m (16 ft)
Output Circuit: Sink type

A. 24 Vdc External power supply
B. Sink type
C. Dummy resistor*5
Output Circuit: Source type

A. 24 Vdc External power supply
B. Source type
C. Dummy resistor *5
 

*5(Example) If the output current is 24 Vdc 50 mA, the output delay time (OFF to ON) is 1.5 μs. If more responsiveness is required or the load is light, install an external dummy resistor to increase the amount of current.
NOTE: The output terminals are not electrically protected. A short circuit or poor connection of the output wiring may cause burnout of external devices and this product. If there is a risk of the current exceeding the output rating, connect an appropriate fuse to each output terminal.

 
High-Speed Counter
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Input 24 Vdc open collector 24 Vdc open collector
Input points CT0 (IN0), CT1 (IN2), CT2 (IN4), CT3 (IN6) CT0 (IN0), CT1 (IN2) (used as pair)
CT0: A Phase, CT1: B Phase
CT2 (IN4), CT3 (IN6) (used as pair)
CT2: A Phase, CT3: B Phase
Minimum pulse width
(Pulse Input)
Count speed
(Rise, Fall time)

t = 1 μs or less (100 kpps)
Phase 1 phase 90 degree phase differential
2 phase signal
1 phase+ directional signal
High speed count frequency 100 kpps 50 kpps
Count edge designation Available Not available
Count register 32 bit UP/DOWN counter
Counter mode change Set through software
Upper/Lower limit setting Not available
Preload - Prestrobe Available
Marker Input (Counter value clear) None IN3, IN7
 
Pulse Catch Input
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Input 24 Vdc open collector
Input points IN0, IN2, IN4, IN6
Minimum pulse width
(Pulse Input)
Input signal ON width

t = 5 μs or more
 
Pulse Output
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Output points 4
Output method PLS0...PLS3 (OUT0...OUT3)*6
Load voltage 24 Vdc
Maximum load current 50 mA/1-point
Minimum load current 1 mA
Maximum output frequency Up to 65 kHz/1-point*6
Pulse acceleration / Deceleration speed Available
ON duty 50% ±10% (at 65 kHz)*7

*6Set with the software.

*7ON duty error (10%) is reduced if the output frequency is low.

 
PWM Output
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Output points 4
Output method PWM0...PWM3 (OUT0...OUT3)*8
Load voltage 24 Vdc
Maximum load current 50 mA/1-point
Minimum load current 1 mA
Maximum output frequency Up to 65 kHz/1-point*8
ON duty 19...81% (at 65 kHz)*9

*8Set with the software.

*9ON duty (effective range) is wider if the output frequency is low.

 
Memory
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Application memory Editor : GP-Pro EX Media FLASH EPROM
Screen area*10 64 MB
User font area 8 MB
Logic program area 132KB(Equivalent to 15,000 steps)
Free space
Removable system No
Backup memory Editor : GP-Pro EX Screen area SRAM 320 KB
Variable area SRAM 64 KB
Battery Replaceable battery / Primary battery for clock data backup

*10Use the screen area when the user font area's capacity is exceeded ー for example, when an image font or a picture font is used ー.

 
Panel Cut Dimensions
Based on the panel cut dimensions, open a mount hole on the panel.
A B C
156 mm (+1/-0 mm)
(6.14 in [+0.04/-0 in])
123.5 mm (+1/-0 mm)
(4.86 in [+0.04/-0 in])
1.6...5 mm
(0.06...0.2 in)
 
External Dimensions / Parts Identification
  1. Status LED
  2. DIO interface
  3. Battery slot
  4. Power plug connector
  5. Ethernet interface (ETH)
  6. CANopen interface (CAN)
  7. USB (micro-B) interface
  8. USB (Type A) interface
  9. Serial interface (RS-232C/422/485) (COM)
  10. Safety alert symbol
  11. Expansion module interface
  12. CANopen LED
  13. Safety alert symbol
 
 

 


Please register here in order to access the download page.
Name: *
Email address: *
Company Name: *
Designation: *
Contact No: *
 
  * Please filled in the required details.