|
Pretravel Adjustment Key
|
For adjusting the pre-/posttravel on analogue spring push gauging transducers. Not for use on digital or pneumatic sensors.
|
|
Right Angle Adapter |
For use with spring push gauging probes. Part Number: 203224
|
|
Replacement Gaiters |
Gaiters can be replaced when damaged. Only pneumatic push probes require gaiter rings.
Part Numbers:
|
Spring Push |
|
Part Number |
Pneumatic Push |
Part Number |
|
A6G/1/S |
D6P/2/S |
205014 |
|
|
|
|
AX/1/S |
DP/2/S |
204851 |
AX/1/P |
DP/2/P |
802691 |
|
AX/1.5/S |
|
204851 |
|
|
|
|
AX/2.5/S |
DP/5/S |
204894 |
AX/2.5/P |
DP/5/P |
802692 |
|
AX/5/S |
DP/10/S |
204860 |
AX/5/P |
DP/10/P |
802693 |
|
AX5/1/S |
DP10/2/S |
204860 |
AX5/1/S |
DP10/2/P |
802693 |
|
|
DP/12/S |
209562 |
|
DP/12/P |
|
|
AX/10/S |
DP/20/S |
205906 |
AX/10/P |
DP/20/P |
803235 |
|
|
|
|
|
|
|
|
|
LE/12/S |
209562 |
|
LE/12/P |
805098 |
|
|
LE/25/S |
205906 |
|
LE/25/P |
804241 |
|
|
Clamping Collet |
Ø9.5 mm |
Ø10 mm |
|
805048 (M4 Screw)
806788 (M3 Screw)
|
806460-SX (M4 Screw) |
|
|
|
|
For use with all 8 mm clamping shaft sensors. The clamping collet distributes the clamping forces evenly around the shaft. Using the supplied grub screw, the probe can be loosened while holding the collet in place. |
|
Extension Cables Analogue |
Extension cables for analogue sensors with 5 pin DIN 240 ° connectors are available for LVDT and Half Bridge types.
|
|
Probe Tips |
Various probes are available. See Probe Tips |
|
Imperial Adapter Sleeves |
Adapter Sleeves can be used to increase the body diameter of 8 mm sensors to 9.512 (3/8"). Available in lengths A from 12 to 127 mm.
|
Imperial Adapter Sleeves
(Split) |
Split Adapter Sleeves can be used to increase the body diameter of 8 mm sensors to 9.512 (3/8"). Available in lengths A from 12 to 127 mm.
|
