|
DRC Inline Conditioner |
|
Power Requirements |
Bipolar Supply |
|
Voltage (VDC) |
10 to 30 |
|
Current Range |
160 mA @ 10 V to 70 mA @ 30 V |
|
|
|
Sensor Excitation |
|
Primary Voltage (Vrms) |
3 nominal |
|
Primary Frequency (kHz) |
5, 10 or 13 (Link Selectable) |
|
|
|
Signal Input |
|
Input Range (mV) |
55 to 5000 (LVDT Full Range) |
|
Input Load Resistance (kΩ) |
100, 2 |
|
Options |
(See note1) |
|
1No inputs are offered. As connection is by screw terminal, additional internal configuration methods are not required.
By changing connections and use of external components, the user can perform:
 Change of Input Polarity
Half Bridge Connection
Grounding on one side of the input
Phase Correction
Quad Resistors
|
|
Signal Output |
|
Voltage Output (VDC) |
Up to ± 10 |
|
Current Output (mA) |
Up to ± 20 into 150 Ω load |
|
Output Ripple |
< 1 mVrms |
|
Output Offset |
100% (Coarse and fine adjustment2) |
|
Temperature Coefficient Gain |
< 0.01% FRO/°C |
|
Temperature Coefficient Offset |
< 0.01% FRO/°C |
|
Warm Up Time |
15 Minutes (recommended) |
|
Linearity |
< 0.1% FRO |
|
Bandwith-3db (Hz) |
500, 1 kHz Link Settable |
|
2Fine adjustment via the front panel. |
|
Environmental |
|
Operating Temperature Range (°C) |
0 to +60 |
|
Storage Temperature Range (°C) |
-20 to +85 |
|
|
|
Mechanical and Connections |
|
Transducer |
Screw Terminals |
|
Power Supply |
Screw Terminals |
|
Output Signal |
Screw Terminals |
|
Material |
Green Polyamide |
|
Enclosure Dimensions without Connectors (mm) |
114.5 x 99 x 22.5 |
|
Weight (g) |
120 |
