TMS-Series - Surface Variation Detector (with Noise Cancelling Function)

FEATURES

Size of the detected variation (lump, neckdown or the like) can be seen at first sight on the display screen with 7 segments LED.Setting of 2 different detecting sensitivity level is available.

Data of the detected variation is saved inside the display unit and, the size and position of the variation can be captured via

    RS-232C interface.

Mal-function caused by dust, bugs, outside random light, etc, can be vastly diminished due to the noise cancelling function.

Maximum 8 axes can be connected with single display unit.

 

SPECIFICATIONS

 

DETECTOR Display unit
 Model TMS-1104W  Model TMS-01
 Detecting direction 4 axis  Sampling Friquency 75KHz（4axis）
 Detection Method Double-slit, infrared LED projection type  Main Display ７segmentLED　5digit
 Detectable Outside Diameter φ0.02～5mm  Sub Display ７segmentLED　2digit
 Detecting Sensitivity 0.02～0.999mm  Recorder Output 0.1mm/V
 Detecting Accuracy +/-10μm. set value  Length Measurement input encorder input
 Slit length 18mm  Length Measurement power output DC12V　Max50mA
 Slit width 0.5mm  Alarm Output Relay contact output(AC250V 2A Resistance load)
 Feeding speed[*1] 1m/min～1000m/min  Outside Contact input Reset input
 Response 3Hz～10KHz  RS-232C interface OK
     Cable Length 
(Between Sensor/Display)		 5m
     Alarm Time 0.01～0.999Sec
 Ambient Temperature -5 - 50 degree centigrade
(No condensation)		  Power Source AC90～240V 50/60Hz
     Power Consumption 17VA
 Outside Dimension(W×H×D[mm]) 350×280×55  Outside Dimension(W×H×D[mm]) 144×144×210
 Weight 3.5kg  Weight 3kg

[*1]Applicable Line speed range varies by variation height.

 

Calibration gauge/ Gauge pin unit/ Fixture guide

Standard Surface Variation Detector (TM-Series)