IDS/ID-Series Joint Detector/Wire-Breaking Detector
  • IDS Series are most recommended as a Joint detector, but ID Series (Low cost type) are also available for several applications.
  • IDS/ID Series are also available for detection of wire-breaking. CDD-15 is availble for detection of extra fine wire-breaking.
  •  
Joint Specifications
 
 Method Proximity type
induction voltage
sensing		 Through type
eddy-current loss
sensing		 Through type
eddy-current
loss sensing by
bridge circuit		 [High sensitivity] 
Through type
eddy-current
loss sensing by
bridge circuit
 Model [S] ID-3L ID-5 ID-8 ID-15 ID-30 ID-50 ID-90 IDS-24 IDS-60 IDS-100 IDX-06
[C] ID-1001 IDS-501 IDX-701
 [S]Outside dimension
 [mm]		 W 30 22 30 38 50 70 110 74 150 201 66
H 30 52 65 80 90 125 175 53.2 113.2 160 47.2
D 22 7 8 10 10 25 38 76 120 124 51
 Through hole dia.(mm) (Distance:15) 5 8 15 25.5 50 90 24 60 100 6
 [C]Outside dimension
 (W * H * D[mm])		 120 * 100 * 55 150 * 120 * 75 160 * 150 * 90 140 * 137 * 101
 Power supply AC100V 50/60Hz AC100/200V 50/60Hz (With power on monitor)
 Power  consumption 2VA 3VA 5VA Less than 12VA
 Detectiong  output Red LED on, One-shot 1a-contact(0.5sec)
 Signal monitor Non Bargraph LED display
 Sensitivity adjustment Single turn volume 10 turns dial 10 truns dial
& 5 step switch		 10 truns dial
& vibration of wire correction
 Ambient  condition Temperature: 0 - 50 degree centigrade, Humidity:35 - 85%RH(No condensation)
 Feature * For less than
10mm dia. objects
* For magnetic
substance
* Not available for
copper material
* Not available for
shielded cable
* Necessary
attention to
sensing area		 * Abundant sensor variations
* Available for all metal material
* Available for torsion & alloyed junction
* Not recommendable to shielded cable
* Necesssary attention to　vibration of wire		 * Available for metal material
（Magnetic substance）
* Available for　
　torsion & alloyed junction
* Also available for　
　shieled cable
* Not so necessary　attention to small vibration of wire		 * Available for all metal material
* Available for torsion & alloyed junction
* Also available for shieled cable
* Not so necessary     attention to small　vibration of wire
 

[S]: Sensor

[C]: Controller
 
Joint detectors are also used for wire-breaking detection. CDD-15 is applicable for extra fine wire-breaking detection. The following table shows a comparison between ID-1001/ID-15 and CDD-15.*take note under 15mm breaking length.
 Type CDD-15
 Method Through type capacitance sensing
 Sesor outside dimension (W * H * D[mm]) 52 * 49 * 30
 Controller outside dimension (W * H * D[mm]) 97 * 131 * 50
 Through hole dia. 15mm
 Power supply AC100/200V 50/60Hz 4VA
 Power on monitor NG
 Detecting object Only for single conductor wire,
More than 0.75mm2 area,
For more than 0.165mm as Covered cable dia.
 Detecting output Red LED on, One-shot 1a-contact(0.5sec)
 Signal monitor Non
 Sensitivity adjustment Non
 Ambient Temperature 1 - 70 degree centigrage
 Feature * Only for Extra fine single conductor wire
* Not so necessary attention to small vibration of wire
 
 

 


Please register here in order to access the download page.
Name: *
Email address: *
Company Name: *
Designation: *
Contact No: *
 
  * Please filled in the required details.