4. SWING TYPE
1) LDM-303H-SP
2) LDM-304H
3) LDM-305H
5.CV LINE TYPE
1)CV-70
2)CV-90
3)CV-120
4)CV-150
DISPLAY
LDM-110 is a compact display unit for high performance single axis laser micrometer.
Includes 16 measurement mode selection and 16 steps averaging setting, HI/LO comparative limit output and analog recorder output
LDM-110
LDM-1000
LDM-1000 is a multi-functions LCD display unit for high performance multi-axis laser micrometer.
Support up to 7 axis simultaneous measurement in single graphical display screen, includes 16 measurement mode selection and 16 steps averaging setting, HI/LO comparative limit output and analog recorder output.
LDM-1000
SINGLE AXES HEAD
Many models with a single axis.
Ultra-fine wire testing down to 0.02~1mm.
You can measure 5mm, 30mm, 90mm, 180mm, and 300mm with a single unit, and measure 600mm, 900mm, 1,200mm and 2,000mm with two units.
DUAL AXES HEAD
Many models with two axis.
From the small size of 0.05~5mm to 2~300mm, you can measure with the X/Y model.
SWING TYPE
When you try to measure the outer diameter of an elliptical or flat cable, you will find that the measurement is not very accurate. In this case, you may try a swing type. It rotates by 90 degrees around the measured object to read max/min values.
CV Diameter
This is an outer diameter tester for a CV Line or CVV Line.
After extrusion, you can visually check the outer diameter of the cable being manufactured inside the vulcanizer pipe. Usually, to measure an outer diameter, you must move back about 60 meters. If you use our product, however, you can stay right next to EXT. and measure the outer diameter of the cable during production by using the installed CV Diameter tester.
