LDM-110
 
 
OUTLINE

 

The AD-50 printer is an ideal recording device for quality control operation on an electric cable production line. It can continuously print messages and distances of produced electric cable when receiving alarm signals from laser micrometer, surface variation detector, spark tester, cable capacitance monitor, joint-detector, disconnection and a great number of other instruments.

 

FEATURES

 

A total of ten messages can be input. 

Preset Setting (forecast,maximum) of count values can be made. 

Scaling of counting pulse can be made. 

Various setting of time, date, etc, can be battery backed up for a long-         term. 

Time, date and lot numbers can be printed out. 

Correct printing-out of count values can be made by setting correction         distance of each messages. 

RS-232C is equiped as standard. 

Super compact size and low cost.

 

Differences between AD-50 and AD-50E

 

SPECIFICATIONS

 

 Counting value display  6-digit, 2-color(Green/Red), 7-segment LED.
 Zero suppress is available.
 Input clock for measuring  Single/Double(A,B) phase pulse input is available, 
 Up/Down counting is available
 Clock Edge  Rising or Falling
 Clock Rate  Free setting between 0.00001m/pulse - 999999m/pulse
 Max. clock frequency  2kPPS or 100PPS
 Count sensor power supply  +12V Max70mA
 No. of Event Message  10 (8 Events + RESET & PRINT)
 Event input  Backside terminal block
 RESET Event input  Backside terminal block & front panel push switch
 PRINTING Event input  Backside terminal block & front panel push switch & RS-232C
 Message Change method  By RS-232C interface
 Counting Value PRESET1  6 digit
 Counting Value PRESET2  6 digit
 Initial Setting  6 digit
 Lot No. setting  4 digit. Automatic increment is available by PRESET.
 Event distance compensation  Correct count value is abailavle by Evevt input distance calibration setting for  each event.
 PRESET output  Count value display or 7-segment charges from Red to Green,
 Front panel LED, RS-232C,
 Relay contact("a" contact, AC250V Resistance load 2A)
 Printer  Thermal type, 20 digit, 58mm wide
 Out-of-paper signal  Front panel LED, relay contact, RS-232C,
 Relay contact ("a" contact, AC250V Resistance load 2A)
Timing function  Year/Month/Date and Hour/Minute
 Battery back-up  Back-up the setting of counting, timing, etc.
 (Back-up hours ; 1 month or more at full charge)
 Communication  RS-232C interface (Baud rate:300 - 19200bps)
 Power Source  AC100 - 240V Free power supply 50/60Hz, 8VA or less
 Outside dimention  144(W) * 144(H) * 191(D)[mm]
 Weight  2.8kg
 Ambient condition  Temperature:0 - 45 degree centigrage, Humidity:35 - 85%RH(No condensation)
 
 

 


Please register here in order to access the download page.
Name: *
Email address: *
Company Name: *
Designation: *
Contact No: *
 
  * Please filled in the required details.