transducers Power:
|
5 Vdc (max 8 350-Ohm load cells in all) |
|
Measuring range: |
÷ -3.9 +3.9 mV / V |
|
Input sensitivity: |
00:02 MicroV / div |
|
Linearity: |
<0.01% FS |
|
Thermal drift: |
<0.001% FS / ° C |
|
Display: |
6 digits, red 7-segment LED, height 14mm |
|
A / D converter: |
24-bit |
|
Internal resolution: |
> 16,000,000 points |
|
Signal Acquisition frequency: |
12 to 1000 Hz |
|
Viewable resolution: |
999,999 displayable divisions on net weight |
|
Divisions value (selectable): |
x1, x2, x5, x10, x20, x50 |
|
Set Decimal: |
0.0; 0:00; 0.000; 0.0000 |
|
Filter: |
Selectable 0.5 ÷ 1000 Hz |
|
Keyboard: |
4 capacitive buttons |
|
Power tool: |
12-24 Vdc ± 15% - absorbed power 5 W |
|
Operating temperature: |
-10 / + 50 ° C (max 85% relative humidity without condensation) |
|
Storage temperature: |
-20 / + 70 ° C |
|
Logic outputs: |
2 optoisolated; MAX 24 Vdc / 100mA cad |
|
Logic inputs: |
2 optoisolated PNP at 24 VDC (external power supply) |
|
Serial Ports: |
1 USB device + 1 + 1 RS232C RS485 / Fieldbus; ASCII protocol or Modbus RTU |
|
Peak Hold function: |
for dynamic measurements |
|
Optional analog output: |
optoisolated 16-Bit Voltage: 0 ÷ 5/10 V (R min10 K Ohm), Current: 0/4 ÷ 20 mA (R max 300 Ohm). |
|
Linearity analogue output: |
<0.02% FS |
|
Thermal analog output drift: |
0.001% FS / ° C |
|
Microcontroller: |
ARM Cortex M0 + 32-bit, 256KB Flash reprogrammable on-board USB |
|
Data storage: |
64 Kbytes expandable up to 1024 Kbytes |
|
Regulatory Compliance: |
EN61000-6-2, EN61000-6-3 EMC; EN61010-1 for Electrical Safety |
|
Electric connections: |
Removable screw terminal blocks 5 mm pitch |
