SCIENCEGATE
Home
Products
Profile
About Us
Events
Career
Contacts
Contact Us
(65) 6561 0488
DAT 200/ETHERNET
Weighing Instrumentation Weight Transmitters
DOWNLOADS
Datasheet
High performance and long-term reliability
Mounting "snap-on" DIN rail (EN50022)
Configuration and calibration from the front panel
Calibration certificates executable with the transducers, or with known weights
RS232 serial output, ASCII protocols, MODBUS
The width dimensions allow to place a large number of transmitters within the electrical automation panels
Interfacing with barriers Intrinsically Safe for use in hazardous areas
TECHNICAL DAT 200 / ETHERNET
transducers Power:
4 V (max 4 x 350 ohm cells)
Measuring range:
-4 to +4 mV / V
Input sensitivity:
00:02 V / division
Linearity:
<0.01% FS
Thermal drift:
<0.001% FS / ° C
Display:
5 digits, red 7-segment LED, height 7 mm
Status LEDs:
2 red
A / D converter:
24-bit
Internal resolution:
of 16,000,000 points
Viewable resolution:
60,000 displayable divisions on net weight
Divisions Value:
0001 ÷ 50 selectable
Filter:
0.02 to 25 Hz Selectable
Keyboard:
3 mechanical buttons (behind the red door)
Power tool:
24 Vdc ± 10% - input power 2 W
Operating temperature:
-10 / + 50 ° C (max 85% relative humidity without condensation)
Storage temperature:
-20 / + 60 ° C
Serial port:
RS232 half duplex with ASCII protocol
Baud rate:
2400 ÷ 115200 Selectable
Transmission distance:
15 m
Direct protocol to fieldbus:
10/100 Ethernet with TCP, MODBUS / TCP, IP
Buffer Size
IN 128 bytes - 128 bytes OUT
Regulatory Compliance:
EN61000-6-2, EN61000-6-3 EMC;
EN61010-1 for Electrical Safety
Electric connections:
Terminal Blocks 5.08 mm pitch screw RJ45 connector
Please register here in order to access the download page.
Name:
*
Email address:
*
Company Name: *
Designation:
*
Contact No:
*
*
Please filled in the required details.