DAT 500/PROFINET

Weighing Instrumentation Weight Transmitters

DOWNLOADS
  • RS232 output, ASCII protocol  
  • High performance and reliability
  • Upload and download function for programming with TESTER 1006
  • The connection can also take place through the external converter
  • Linearization on 10 points
  • Executable calibration with transducers Certificates
  • Configuration and calibration from the front or from the PC via the RS232 serial port with Inovation ™ program (MS Windows)

TECHNICAL DAT 500 / PROFINET

Encoder supply: 5 V (max 6 350 ohm cells)
Measuring range: -0.5 to +3.5 mV / V (optional from -3.9 to +3.9 mV / V)
input sensitivity: 00:02 microV / Division
Linearity: <0.01% of full scale
Temperature drift: <0.001% FS / ° C
Display: 6 digits, red 7-segment LED, height 14 mm
A / D converter: 24-bit
Internal resolution: > 16,000,000 points
viewable resolution: 60,000 displayable divisions on the net weight
divisions value (selectable): x1, x2, x5
settable decimal: 0.0; 0.00; 0.000
Filter: selectable from 0.1 to 25 Hz
Power tool: 24 VDC ± 15% - Power consumption 5 W
Operating temperature: -10 To + 50 ° C (max 85% humidity non-condensing)
Storage temperature: -20 To + 70 ° C
logic outputs: 2 optisolate; MAX 24 VDC / 100 mA each.
Logic inputs: 2 opto-isolated 24V dc PNP (external power supply)
Serial port: RS232C with ASCII or Modbus RTU protocols
Transmission distance: 15m (RS232C)
fieldbus protocol: PROFINET
Peak Hold function: for dynamic measurements
Baud rate: 2400, 9600, 19200, 38400, 115200 Selectable
Regulatory Compliance: EN61326-1, EN55011 and EN55014 EMC; EN61010-1 for Electrical Safety
Electric connections: Terminal screw, step 5 mm
Dimensions and weight: 96 x 48 x 120 mm (W x H x D); 250 g
 
 

 


Please register here in order to access the download page.
Name: *
Email address: *
Company Name: *
Designation: *
Contact No: *
 
  * Please filled in the required details.