SCIENCEGATE

DAT S 1400

DAT S 1400 is a stainless steel weighing instrument. High quality, 100% customizable. Configuration and calibration can be done both from the front panel and from the serial port. Inspired by DAT 1400 and keeping unchanged all the features and functions of the aforementioned; DAT-S version can be considered as a valid tool for weighing and production activities. Including peak hold function for dynamic measurements and many other options that adapt to customer needs.

Legal for Trade: certification available on request
Measuring range: -3.9 ÷ +3.9 mV/V
Input sensitivity: 0.02 µV/count
Full scale non-Linearity: <0.01%
Gain drift: < 0.001% FS/°C
Display: 6 digit, 7-segment LED red, height 14mm
A/D Converter: 24 bit
Internal Resolution: > di 16.000.000 points
Frequency signal acquisition: 12 ÷ 1000 Hz
Visible resolution (in divisions): 999999
Divisions value (adjustable): x1, x2, x5, x10, x20, x50
Decimal figures range: 0 ÷ 4
Temperature range: -10 ÷ +50°C (max umidity 85% without condensation)
Storage temperature: -20 ÷ +70°C
Filter: 0.5 ÷ 1000 Hz
Excitation voltage: 5 Vdc (max 8 -350 Ohm- load cells)
Logic output: 2 optoisolated outputs; max 24 Vdc/100 mA each
Logic input: 2 optoisolated inputs 24 Vdc PNP (external power supply)
Serial port: 1 USB device + 1 RS232C + 1 RS485/Fieldbus; ASCII or Modbus RTU protocol
Analog output Non-Linearity: < 0,02%
Temperature drift analog output: 0,001% FS / °C
Power supply: 12 ÷ 24 Vdc ±15% - power consumption 5 W
Microcontroller: ARM Cortex M0 + 32 bit 256KB Flash reprogrammable onboard via USB
Data storage: 64 Kbytes expandable up to 1024 Kbytes (optional)
Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety