SCIENCEGATE

Mounting Solution for Front IP65 Panel PC

Mounting Solution – Front IP65 Panel PC

Mounting solution is a collection of different kinds of mounting methods that can help you to know how to mount your product correctly and rapidly. Mounting solution can also guide you to find the product that really fit your needs.

__________________________________________________________________________________________________________

Overview – Front IP65 Panel PC

Front IP65 Panel PC has a special rubber (O-ring) on the rear of front bezel. This design allows sealing the front bezel and customer’s fixture to prevent water and dust from entering the enclosure.

__________________________________________________________________________________________________________

Assembly Diagram

__________________________________________________________________________________________________________

Front IP65 Mounting Kit

Front IP65 Mounting Kit consists of M4 screws. The amount of screws supplied varies by Panel PC size.

Note: The thickness of the screw depends on customer's fixture.

__________________________________________________________________________________________________________

Installation Step

Step 1

Make a cutout on the fixture (ex. wall) according to the cutout dimension of the Panel PC.

Note: All installation processes will be done from the rear side of the fixture.

Step 2

Based on the drawing mark screw holes on a rear side of the fixture. Place the Panel PC on the fixture from the front side. The sides of the bezel should be visible from outside.