Feather Touch Digital Spring Push Gauging Probe (DT/S) - Specification

Feather Touch
Axial Cable Outlet DT/2/S DT/5/S DT/10/S DT/20/S DT10/2/S
Radial Cable Outlet DTR/2/S DTR/5/S DTR/10/S DTR/20/S DTR10/2S
 
Measurement Performance
Measurement Range (mm) 2 5 10 20 2
Accuracy (% of Reading) (Note 1) 0.05 0.05 0.06 0.07 0.05
Accuracy (% of Reading) (Note 1) - with In Line Connector 0.2 0.15 0.15 0.15 0.2
Repeatability (worst case) µm (Note 2) 0.15 0.15 0.15 0.15 0.15
Repeatability (typical) µm (Note 3) 0.05 0.05 0.07 0.07 0.05
Resolution (µm) 0.01 0.05 0.05 0.1 0.01
Pre Travel (mm) 0.15 0.15 0.15 0.15 0.15
Post Travel (mm) 0.85 0.85 0.85 0.85 8.85
Tip Force (N) at Middle of Range ±20% 0.3 0.3 0.3 0.3 0.3
Temperature Coefficient %FS/°C 0.01 0.01 0.01 0.01 0.01
 
Environmental
Sealing for Probe IP65 with gaiter or IP50 without gaiter
Sealing for Probe Interface Electronics IP43 for module and TCON
Storage Temperature (°C) -20 to +80
Probe Operating Temperature with Gaiter (°C) -5 to +80
Probe Operating Temperature without Gaiter (°C) -10 to +80
Electronics Operating Temperature (°C) 0 to +60
EMC Emissions EN61000-6-3
EMC Immunity EN61000-6-2
Probe Life 100 million cycles (no side load), > 10 million cycles in most applications
 
Material
Probe Body Stainless Steel
Probe Tip (options) Nylon, Ruby, Silicon Nitride, Tungsten Carbide
Gaiter (Note 6) Fluoroelastomer or Silicon
Cable PUR
Electronics Module ABS
 
Electronics Interface (Orbit®3)
Orbit®3 Interface Options USB, Ethernet, RS232
Reading Rate 3906 readings per second
Bandwidth of Electronics (Hz) user selectable 460, 230, 115, 58, 29, 14, 7, 4
Power 5±0.25 VDC @ 0.06A typical
 
1Accuracy 1 µm or % reading, whichever greater.
2Repeated operation against a carbide target with side load applied to the bearing using max-min.
3Repeated operation against a carbide target standard deviation from average (68%)
6Different gaiter materials available for specific applications - Fluoroelastomer standard option
 
 

 


Please register here in order to access the download page.
Name: *
Email address: *
Company Name: *
Designation: *
Contact No: *
 
  * Please filled in the required details.