27M SERIES

27M series converters/transmitters measure and converts relative and differential pressures into an electrical signal both for standard values (3÷15 psi or 0.2÷1 bar) and not standard ones.

The sensor is a Wheatstone bridge integrated on a chip. The direct conversion of the pressure into an electrical signal is achieved by a minute deflection of sensor diaphragm which changes the resistance of the bridge with the applied stress; changes in pressure cause a corresponding change in the transmitter output proportionally to the bridge unbalance.

A single circuit supplies power to sensor and receives its signal providing conversion into a standard 4÷20 mA dc.

 
Typology

Pressure

Measure Principle

Piezoresistive
Ceramic

Measuring Range

0 ÷ 0.003 bar
0 ÷ 16 bar

Process Connection

1/8″ NPT-F

Process Temperature

-40 ÷ +85°C

Approvals
    
Datasheet
 
 

 


Please register here in order to access the download page.
Name: *
Email address: *
Company Name: *
Designation: *
Contact No: *
 
  * Please filled in the required details.