SI-POWERLINK

Unidrive, Commander, Digitax and the Pump Drive families can now connect to all POWERLINK networks. SI-POWERLINK

SI-POWERLINK serves applications ranging from simple open-loop systems through to those demanding precise motion control.

POWERLINK is a communications protocol based upon standard Ethernet and provides a solution for real-time industrial Ethernet to satisfy the requirements of industrial automation and process control. High-speed, deterministic response times are ensured via a mix of timeslot and polling procedures.

POWERLINK is used in applications in industries including automotive, energy management, machinery, industrial automation, railway and maritime transportation, robotics, vision systems and many more.

SI-POWERLINK-Unidrive
 
 
Drive Range High Performance General Purpose
General   Unidrive, Digitax Commander, Pump Drive
Maximum number of modules per drive 1 1
Smartcard parameter backup/restore Supported
Maximum number of drives on single POWERLINK network As defined by POWERLINK standard
Cyclic
Data
(PDO)		 Drive Parameter Access All drive parameters accessible
Maximum parameter mappings per PDO 32

Examples of supported configurations:

  • 8 x 32 bit parameters IN and 8 x 32 bit parameters OUT, or
  • 16 x 16 bit parameters IN and 16 x 16 bit parameters OUT, or
  • 32 x 8 bit parameters IN and 8 x 32bit parameters OUT
Maximum RPDO + TPDO buffer size, e.g. the total
number of bytes that can be transmitted and received		 64 bytes
Inter-option Parameter communication Not currently supported N/A
Minimum network cycle time 500 μs
Minimum drive parameter update rate (read/write) 500 μs 20 ms
Drive control loop synchronization Supported N/A
Noncyclic
data
(SDO)		 Drive Parameter Access Supported
Inter-option parameter communication Supported N/A
Minimum drive parameter update rate (read/write) 10 ms 50 ms

 

Ordering Guide
Option Module Order Code
SI-POWERLINK 82400000021600
 
 

 


Please register here in order to access the download page.
Name: *
Email address: *
Company Name: *
Designation: *
Contact No: *
 
  * Please filled in the required details.