Length measurement of tread strips
 
 

Non-contact inline length measurement of tread strips

For tire production, tread strips are cut from the extruded strip material. The system TLS 8303.I is applied in the extrusion line to measure the length of the strips immediately after the cutting machine in order to ensure a secure production process in high quality.

 

Benefits

  •  Optimizing the material use and quality
  •  Geometrically independent comparison of cutting edges
  •  Easy integration to already existing lines
  •  Customer-specific adjustable interface
 

Material parameters

  •  Strips lengths from 1,500mm to 2,500mm
  •  Feed rate to 2m/s
 

TLS 8303.I

Length measurement of tread strips

At the optical testing desk TLS 8303.I, rubber strips for tire production are inspected for their profile and length characteristics. Two cameras record the cutting edges of the strips. Deviations from the nominal cutting edge are detected by an intelligent composition proceedings. The cutting edges are compared to each other in order to evaluate the strip lengths. Therefore, the pictures are revalued using a stabilizer filter and different algorithms.

Special features:

  •  Resolution 0.125mm
  •  Cycle time: 3 strips per second
  •  Strip length offset ±50mm
 
 

 


Please register here in order to access the download page.
Name: *
Email address: *
Company Name: *
Designation: *
Contact No: *
 
  * Please filled in the required details.