Recommended Substitute
Model in use Comments
AGP3500-S1-D24-D81K GP3000 Series
10.4" STN color LCD
DIO(Sink) type
DC power supply

Recommended Substitutes Comments
AGP3500-T1-D24-D81K GP3000 Series
panel cut-out size same
TFT color LCD
DC power supply
 
 

 

Recommended Substitute
Model in use Comments
AGP3500-S1-D24-D81C GP3000 Series
10.4" STN color LCD
DIO(Source) type
DC power supply

Recommended Substitutes Comments
PFXSP5500TP + PFXSP5B10 SP5000 Series DC power supply
Panel cut-out same
TFT color LCD
FLEXNETWORK unit (Model No. PFXZCHEUFN1) is required
Change I/O control to FLEXNETWOK. 
AGP3500-T1-D24-D81C GP3000 Series
panel cut-out size same
TFT color LCD
 
 
  1. HMI + Control ›
  2. HMI + Discrete I/O ›
  3. AGP3000 Series ›
  4. 10.4" DIO HMIIO HMI
 

AGP3500 - 10.4" DIO HMI

Control with Discrete I/O
  Graphic Display Resolution: 640 x 480 pixels
Display Area: W211.2 x H158.4 mm (W8.31 x H6.24 in)
Touch Screen: Resistive Film (analog) 1024 x 1024 resolution
Backlight: CCFL, Service Life: 50,000+ hrs (typ)
Ambient Operating Temperature:: 0 to 50 deg C (32 to 122 deg F)
Storage Temperature: -20 to 60 deg C (-4 to 140 deg F)
Environmental Ratings: IP65f, NEMA Type 4x/13
PRODUCT SPECIFICATIONS
Part Number to Order:
Display Type and Size:
10.4" TFT Color LCD
Display Colors:
65,536 Colors (no blink); 16,384 (3 sp blink)
CF Card:
1 slot, Type II
Serial Ports (COM1):
RS232-C/422/485
Serial Ports (COM2):
RS-422/485
Ethernet:
Yes
USB (1):
Type-A (1.1)
USB (2):
Type-A (1.1)
Brightness/ Contrast Controls:
8 levels via touch panel
Programming Memory:
8mb Flash EPROM
Backup Memory:
320kb SRAM
Sound Output:
Speaker output 70mW (rated load: 8ohm, Frequency: 1kHz)
Video Mix Interface: Support for optional GP2000-VM41, 4 channel Video camera input and remote RGB monitor with output
Discrete 6 in 2 Out Interface:
6 inputs 24 VDC, rated 5.7mA; 2 Outputs 24 VDC, rated @ 200mA
AUX Input:
Discrete Input: Remote Reset
AUX Output:
Discrete Output: Alarm, Run, Buzzer
Certifications:
CE, CSA, cUL, UL Listed C1D2
 CE, CSA, UL Listed C1D2
CE, CSA, cUL, UL Listed C1D2
CE, CSA, UL Listed C1D2
Input Voltage:
24 VDC
100VAC to 240VAC
24 VDC
100VAC to 240VAC
Power Consumption:
50W or less
100VAC - <0.9A;
240VAC - <0.45A
50W or less
100VAC - <0.9A;
240VAC - <0.45A
* K suffix denotes product is Sink type
* C suffic denotes product is Source type
 
 

 

Recommended Substitute
Model in use Comments
AGP3500-S1-D24-D81C GP3000 Series
10.4" STN color LCD
DIO(Source) type
DC power supply

Recommended Substitutes Comments
PFXSP5500TP + PFXSP5B10 SP5000 Series DC power supply
Panel cut-out same
TFT color LCD
FLEXNETWORK unit (Model No. PFXZCHEUFN1) is required
Change I/O control to FLEXNETWOK. 
AGP3500-T1-D24-D81C GP3000 Series
panel cut-out size same
TFT color LCD
 
 
  1. HMI + Control ›
  2. HMI + Discrete I/O ›
  3. AGP3000 Series
  4. 10.4" DIO HMI ›
 
AGP3000 Series with Discrete I/O
 
 
 

Features

  • I/O is built-in - no extra modules needed
  • Supports 6in/2out (sink or source)
  • Ladder Logic included
  • Ultra Fast Application Transfer

Line Up


5.7" | 7.5" | 10.4" | 12.1"

Options

  • Screen Protector Sheets
  • Cables
  • Mounting Plate Adapters
  • Full list of AGP3000 Series options
 
 

 

Recommended Substitute
Model in use Comments
AGP3500-S1-D24-D81C GP3000 Series
10.4" STN color LCD
DIO(Source) type
DC power supply

Recommended Substitutes Comments
PFXSP5500TP + PFXSP5B10 SP5000 Series DC power supply
Panel cut-out same
TFT color LCD
FLEXNETWORK unit (Model No. PFXZCHEUFN1) is required
Change I/O control to FLEXNETWOK. 
AGP3500-T1-D24-D81C GP3000 Series
panel cut-out size same
TFT color LCD
 
 
  1. HMI + Control ›
  2. HMI + Discrete I/O
  3. AGP3000 Series ›
  4. 10.4" DIO HMI ›
 

HMI + Discrete I/O

HMI Discrete I/OThe Pro-face control product line with discrete I/O offers the same extensive, built-in, time-saving features that help customers develop fast, consistent, standardized graphical interfaces as the standard product line plus control. HMI with Discrete I/O interface combines HMI and PLC functions while providing 6 outputs and 2 inputs. For great performance, compact size, flexibility and network connectivity options, HMI with Discrete I/O is the perfect choice. Add single platform data management and control with GP-Pro Ex or Pro-Server EX software to complete the winning combination.

Control Features:

  • Integrated 6-input/2-output sink/source I/O

Multiple Sizes and Screen Types:

  • Display Size: 5.7” to 12.1”
  • Screen Type: TFT, STN color or mono touch screens
  • Analog Resistive Touch Screens (no grid)
  • Data sharing & collection through DDE, SQL, etc.
  • Global Certification: RoHS, UL Listed C1 Div 2, CSA, CE

Available Ports:

  • Ethernet: 10Base-T/100Base-TX
  • USB: Two USB 1.1 Host Type A
  • Speaker output: 70mW
  • COM Port 1: RS-232/422/485
  • COM Port 2: RS-422/485
  • CompactFlash card slot Type II
  • Expansion bus port for optional communication modules
  • Remote Data Monitoring and reporting
  • Large selection of controller connectivity
  • Full-featured HMI screen editor software
 
 

 

Recommended Substitute
Model in use Comments
AGP3500-S1-D24-D81C GP3000 Series
10.4" STN color LCD
DIO(Source) type
DC power supply

Recommended Substitutes Comments
PFXSP5500TP + PFXSP5B10 SP5000 Series DC power supply
Panel cut-out same
TFT color LCD
FLEXNETWORK unit (Model No. PFXZCHEUFN1) is required
Change I/O control to FLEXNETWOK. 
AGP3500-T1-D24-D81C GP3000 Series
panel cut-out size same
TFT color LCD
 
 
  1. HMI + Control
  2. HMI + Discrete I/O ›
  3. AGP3000 Series ›
  4. 10.4" DIO HMI ›
  5. AGP3500-T1-D24-D81C(PFXGP3500TADDC)
 

Functional Specifications

Display Type
TFT Color LCD
Display Size
10.4"
Resolution
640 x 480 pixels (VGA)
Dot pitch
W0.33 x H0.33 mm [W0.01 x H0.01 in.]
Effective Display Area
W211.2 x H158.4 mm [W8.31 x H6.24 in.]
Display Colors
65,536 Colors (No blink)/16,384 Colors (Blink)
Backlight
CCFL (Replaceable)
Brightness Control
8 Levels (Adjusted with the touch panel)
Contrast Control
Not applicable
Backlight Service Life
50,000 hrs. or more (continuous operation at 25°C before backlight brightness decreases to 50% or backlight starts to blink)
Language Fonts
Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean fonts, Simplified Chinese and Traditional Chinese fonts are downloadable.
Character Sizes
Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts
Font Sizes
Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.
8 x 16 dots
80 char. x 30 rows
16 x 16 dots
40 char. x 30 rows
32 x 32 dots
20 char. x 15 rows
8 x 8 dots
80 char. x 60 rows
Program Area
FLASH EPROM 132 KB
Number of Step
Equivalent to 15,000 steps*1
Variable Area
SRAM 64 KB (uses lithium battery)*2
Application Memory
FLASH EPROM 16 MB*3
Data Backup
SRAM 320KB (uses lithium battery)*4
Clock Accuracy
65 sec/month (deviation at room temperature and power is OFF)*5
Touch Panel Type
Resistive Film (analog)
Touch Panel Resolution
1,024 x 1,024
Touch Panel Service Life
1,000,000 times or more
Serial (COM1)
RS-232C/422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Even or Odd, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector: D-Sub9 (plug)
Serial (COM2)
RS-422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Even or Odd, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, 187.5kbps (MPI), Connector: D-Sub9 (socket)
Ethernet (LAN)
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1
Expansion Unit 1
Communication Expansion Unit x 1
Expansion Unit 2
VM/DVI Input Expansion Unit x 1
USB (TYPE-A)
Conforms to USB1.1 (TYPE-A) x 2, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less
Expansion Memory
Function Expansion Memory x 1 (on internal circuit board)
CF Card
Compact Flash Card Slot (TYPE-II) x 1
Sound Output
Speaker Output, 70 mW (Rated Load: 8 Ω, Frequency: 1 kHz), Connector: 2-piece terminal block (AUX) x 1
AUX Input/Output
Alarm Output, RUN Output, Buzzer Output, Rated Voltage: DC24V, Rated Current: 50mA, Remote Reset Input, Input Voltage: DC24V, Connector: 2-piece terminal block (AUX) X 1
DIO (Source Type)
6-Point Input Sink Source, , 2-Point Output Sink, Connector: 12pin

1Up to 60,000 steps can be converted in software. However, this reduces internal memory capacity (for screen data) by 1 MB.

2A Lithium battery's lifetime is:
10 years when the battery's ambient temperature is 40°C or less
4.1 years when the battery's ambient temperature is 50°C or less.
1.5 years when the battery's ambient temperature is 60°C or less.
When used for back up: Approximately 100 days, with a fully charged battery.
Approximately 6 days, with a half-charged battery.

3Capacity available for user application. 8 MB available if the revision of the unit is earlier than Rev. 4, or GP-Pro EX Ver. 2.5 or earlier is used.

4A Lithium battery's lifetime is:
10 years when the battery's ambient temperature is 40°C or less
4.1 years when the battery's ambient temperature is 50°C or less.
1.5 years when the battery's ambient temperature is 60°C or less.
When used for back up: Approximately 100 days, with a fully charged battery.
Approximately 6 days, with a half-charged battery.

5Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

General Specifications

International Safety Standards
Rated Input Voltage
DC 24V
Input Voltage Limits
DC 19.2 to 28.8V
Allowable Voltage Drop
10 ms or less
Power Consumption
50 W or less
In-Rush Current
30 A or less
Voltage Endurance
AC 1,000V, 20 mA for 1 minute (between charging and FG terminals)
Insulation Resistance
DC 500 V, 10 MΩ or more (between charging and FG terminals)
Surrounding Air Temperature
0 to 50 °C (32 to 122 °F)
Storage Temperature
-20 to 60 °C (-4 to 140 °F)
Ambient Humidity
10 to 90 % RH (Wet bulb temperature: 39 °C or less - no condensation.)
Storage Humidity
10 to 90 % RH (Wet bulb temperature: 39 °C or less - no condensation.)
Dust
0.1 mg/m³ or less (non-conductive levels)
Pollution Degree
For use in Pollution Degree 2 environment
Atmosphere
Free of corrosive gases
Air Pressure (altitude range)
800 to 1,114 hPa (2,000 m [6,561ft.] above sea level or less)
Vibration Resistance
IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)
Concussion Resistance
IEC/EN61131-2 compliant, 147m/s² X,Y,Z directions for 3 times
Noise Immunity
Noise Voltage: 1,000Vp-p, Pulse Duration: 1µs, Rise Time: 1ns, (via noise simulator)
Electrostatic Discharge Immunity
Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)
Grounding
Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)
Structure
Equivalent to IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)*6
Installation Configuration
Embedded panel
Cooling Method
Natural air circulation
Weight Approx.
2.7 kg [5.9 lb] or less (display unit only)
External Dimensions
W270.5 x H212.5 x D57 mm [W10.65 x H8.37 x D2.24 in.]
Panel Cut Dimensions

 

W259 x H201 mm [W10.2 x H7.91 in.], Panel thickness area: 1.6 to 10 mm [0.06 to 0.39 in.]*7

6The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit's level of resistance is equivalent to these standards, oils that should have, no effect on the GP can possibly harm the unit. This can occur in areas where either, vaporized oils are present, or where low viscosity cutting oils are allowed to adhere, to the unit for long periods of time. If the GP's front face protection sheet becomes, peeled off, these conditions can lead to the ingress of oil into the GP and separate, protection measures are suggested., Also, if non-approved oils are present, it may cause deformation or corrosion of the, front panel’s plastic cover. Therefore, prior to installing the GP be sure to confirm the, type of conditions that will be present in the GP's operating environment., If the installation gasket is used for a long period of time, or if the unit and its gasket, are removed from the panel, the original level of the protection cannot be guaranteed., To maintain the original protection level, be sure to replace the installation gasket, regularly.

7Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.].
 
 

 

  1. Proface | AGP3500-S1-D24-M
  2. Proface | AGP3500-S1-D24
  3. Proface | AGP3500-S1-AF-D81K
  4. Proface | AGP3500-S1-AF-D81C

Page 70 of 126