 |
|
|
Specification of PS3001-BD
PS-3001B
Model: PS3001-BD
/ DDR2 256MB-1GB
ULV Celeron(R)M 600MHz
Functional Specification
|
Supported OS |
Windows® 2000/Windows® XP/Windows® XP Embedded |
|
CPU |
ULV Intel® Celeron® M 600 MHz |
|
L2 Cache Memory |
512 KB (Built in the CPU) |
|
Main Memory |
DDR SDRAM (PC2700), 256 MB/512 MB/1 GB (SO-DIMM socket x 1 slot) |
|
Chipset |
Intel® 855GME + ICH4 |
|
Graphics Accelerator |
Built in Intel® 855GME |
|
Video Memory |
64 MB or less (When using Windows®) UMA Type |
|
Graphics |
SVGA (800 x 600 pixels) to FHD (1,920 x 1,080 pixels) |
|
BIOS |
Phoenix® First BIOS Embedded Pro |
|
Clock Accuracy |
±180 sec. /month (deviation at room temperature and power is OFF)*1 |
|
Interface |
IDE |
CF Card Slot (Type I/II) x 2 (Primary Slave and Secondary Master) |
|
Serial (COM1) |
RS-232C, Connector: D-Sub9 (plug) |
|
Serial (COM2) |
RS-232C (RS-232C/422/485 switch possible, RI/+5 V switch possible), Connector: D-Sub9 (plug) |
|
Ethernet (LAN1) |
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1 |
|
Ethernet (LAN2) |
IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T, Connector: Modular jack (RJ-45) x 1*2 |
|
USB (TYPE-A) |
Conforms to USB2.0 (TYPE-A) x 4, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less |
|
Video |
Analog RGB output connector: mini D-Sub9 (socket) x 1 |
|
Sound |
Speaker output, connector: mini-pin jack |
-
*1 Depending on the operating temperature and age of unit, the clock can deviate ±300 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
-
*2 Wake On LAN supported.
General Specification
|
International Safety Standards |
|
|
Rated Input Voltage |
DC 24 V |
|
Input Voltage Limits |
DC 19.2 to 28.8 V |
|
Rated frequency |
50/60 Hz |
|
Allowable Voltage Drop |
5 ms or less |
|
Power Consumption |
40 W or less |
|
In-Rush Current |
30 A or less |
|
Voltage Endurance |
AC 500 V, 20 mA for 1 min (between charging and FG terminals) |
|
Insulation Resistance |
DC 500 V, 10 MΩ or more (between charging and FG terminals) |
|
Surrounding Air Temperature |
0 to 50 ℃ |
|
Storage Temperature |
-20 to +60 ℃ |
|
Ambient Humidity |
10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.) |
|
Storage Humidity |
10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.) |
|
Dust |
0.1 mg/m3 or less (non-conductive levels) |
|
Pollution Degree |
For use in Pollution Degree 2 environment |
|
Atmosphere |
Free of corrosive gases |
|
Air Pressure (altitude range) |
800 to 1,114 hPa (2,000 m above sea level or less) |
|
Vibration Resistance |
IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min) |
|
Noise Immunity |
Noise Voltage: 1,500 Vp-p, Pulse Duration: 50 ns, 500 ns, 1 μs, Rise Time: 1 ns, (via noise simulator) |
|
Noise Immunity (Fast Transient Burst Noise) |
Power Line: 2 kV (IEC/EN61000-4-4), COM Port: 1 kV (IEC/EN61000-4-4) |
|
Electrostatic Discharge Immunity |
Contact Discarge Method: 6kV (IEC/EN61000-4-2 Level 3) |
|
Grounding |
Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals) |
|
Structure |
IP20 |
|
Installation Configuration |
Stand-alone |
|
Cooling Method |
Natural air circulation |
|
Weight Approx. |
2 kg [4.4 lb] or less (display unit only) |
|
External Dimensions |
W255 x H164 x D68.8 mm [W10.04 x H6.46 x D2.71 in.] |
External Dimensions / Interfaces / Panel Cut-out
Panel Cut-Out Dimensions
|
|
|
|
|
|
|
|
|
Specification of PS3000-BA
PS-3000B
Model: PS3000-BA
/ DDR2 256MB-1GB
ULV Celeron(R)M 600MHz
Functional Specification
|
Supported OS |
Windows® 2000/Windows® XP/Windows® XP Embedded |
|
CPU |
ULV Intel® Celeron® M 1.0 GHz |
|
Main Memory |
DDR SDRAM (PC2700), 256 MB/512 MB/1 GB (SO-DIMM socket x 1 slot) |
|
Chipset |
Intel® 855GME + ICH4 |
|
Graphics Accelerator |
Built in Intel® 855GME |
|
Video Memory |
64 MB or less (When using Windows®) UMA Type |
|
Graphics |
VGA (640 x 480 pixels) to FHD (1,920 x 1,080 pixels) |
|
BIOS |
Phoenix® First BIOS Embedded Pro |
|
Clock Accuracy |
±180 sec. /month (deviation at room temperature and power is OFF)*1 |
|
Interface |
IDE |
2.5" HDD X 1 (Primary Master), CF Card Slot (Type I/II) X 2 (Primary Slave and Secondary Master) |
|
Serial (COM1) |
RS-232C, Connector: D-Sub9 (plug) |
|
Serial (COM2) |
RS-232C (RS-232C/422/485 switch possible, RI/+5 V switch possible), Connector: D-Sub9 (plug) |
|
Ethernet (LAN1) |
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1 |
|
Ethernet (LAN2) |
IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T, Connector: Modular jack (RJ-45) x 1*2 |
|
USB (TYPE-A) |
Conforms to USB2.0 (TYPE-A) x 4, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less |
|
Video |
Analog RGB output connector: mini D-Sub9 (socket) x 1 |
|
Sound |
Speaker output, connector: mini-pin jack |
-
*1 Depending on the operating temperature and age of unit, the clock can deviate ±300 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
-
*2 Wake On LAN supported.
General Specification
|
International Safety Standards |
|
|
Rated Input Voltage |
AC 100 to 240 V |
|
Input Voltage Limits |
AC 85 to 264 V |
|
Rated frequency |
50/60 Hz |
|
Allowable Voltage Drop |
1 cycle or less(Voltage drop interval must be 1 second or more.) |
|
Power Consumption |
120 VA or less |
|
In-Rush Current |
AC 100 V, 30 A or less, AC 240 V, 50 A or less |
|
Voltage Endurance |
AC 1,500 V 20 mA for 1 min (between charging and FG terminals) |
|
Insulation Resistance |
DC 500 V, 10 MΩ or more (between charging and FG terminals) |
|
Surrounding Air Temperature |
5 to 50 ℃: with HDD, 0 to 50 ℃: without HDD |
|
Storage Temperature |
-20 to +60 ℃ |
|
Ambient Humidity |
10 to 90 % RH (Not condensing, wet bulb temperature: 39 ℃ or less. Wet bulb temperature with HDD: 29 ℃ or less) |
|
Storage Humidity |
10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.) |
|
Dust |
0.1 mg/m3 or less (non-conductive levels) |
|
Pollution Degree |
For use in Pollution Degree 2 environment |
|
Atmosphere |
Free of corrosive gases |
|
Air Pressure (altitude range) |
800 to 1,114 hPa (2,000 m above sea level or less) |
|
Vibration Resistance |
With HDD: 10 to 25 Hz 4.9 m/s², X,Y,Z directions (30 min), Without HDD: IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration 9.8 m/s², X, Y, Z directions for 10 cycles (100 min) |
|
Noise Immunity |
Noise Voltage: 1,500 Vp-p, Pulse Duration: 50 ns, 500 ns, 1 μs, Rise Time: 1 ns, (via noise simulator) |
|
Noise Immunity (Fast Transient Burst Noise) |
Power Line: 2 kV (IEC/EN61000-4-4), COM Port: 1 kV (IEC/EN61000-4-4) |
|
Electrostatic Discharge Immunity |
Contact Discarge Method: 6kV (IEC/EN61000-4-2 Level 3) |
|
Grounding |
Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals) |
|
Structure |
IP20 |
|
Installation Configuration |
Stand-alone |
|
Cooling Method |
Forced air cooling by the CPU fan |
|
Weight Approx. |
3 kg [6.6 lb] or less (display unit only) |
|
External Dimensions |
W255 x H164 x D124 mm [W10.04 x H6.46 x D4.88 in.] |
External Dimensions
Panel Cut-Out Dimensions
|
|
|
|
|
|
|
|
|
Specification of APL3000-BD
PL-3000B
Model: APL3000-BD
/ DDR2 512MB-4GB
Core TM Duo 2.0GHz/Celeron(R)M440 1.86GHz
Functional Specification
|
Supported OS |
Windows® 2000/Windows® XP/Windows® XP Embedded |
|
CPU |
Intel® Core™ Duo 2.0 GHz/Celeron® M 440 1.86 GHz |
|
L2 Cache Memory |
Intel® Core™ Duo 2.0 GHz 2 MB/Celeron® M 440 1.86 GHz 1 MB (Built in the CPU) |
|
Main Memory |
DDR2 SDRAM (PC4200), 512 MB/1 GB/2 GB (SO-DIMM socket x 2 slots)*1 |
|
Chipset |
Intel® 945GME + ICH7M |
|
Graphics Accelerator |
Built in Intel® 945GME |
|
Video Memory |
64 MB or less (When using Windows®) UMA Type |
|
Graphics |
VGA (640 x 480 pixels) to UXGA (1,600 x 1,200 pixels) |
|
BIOS |
Phoenix® TrustedCore™ BIOS |
|
Clock Accuracy |
±180 sec/month (deviation at room temperature and power is OFF)*2 |
|
Interface |
Serial ATA |
Serial ATA Rev. 1.0a x 2, 2.5" HDD Unit or SSD Unit |
|
IDE |
Master: CF Card Slot (Type I/II compatible) x 1, Slave: DVD Drive x 1 |
|
Serial (COM1) |
RS-232C (RS-232C/422/485 switch possible, RI/+5 V switch possible), Connector: D-Sub9 (plug) |
|
Serial (COM2) |
RS-232C (RI/+5 V switch possible), Connector: D-Sub9 (plug) |
|
Serial (COM3) |
RS-232C, Connector: D-Sub9 (plug) |
|
Serial (COM4) |
RS-232C, Connector: D-Sub9 (plug) |
|
Ethernet (LAN1) |
IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T, Connector: Modular jack (RJ-45) x 1 |
|
Ethernet (LAN2) |
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1 |
|
USB (TYPE-A) |
Conforms to USB2.0 (TYPE-A) x 4, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less |
|
Video |
DVI-I OUT, Connector: DVI-I 29 pin (socket) X 1*3 |
|
RAS |
Input (external reset input possible): 2 points, Output 2 points, Rated Voltage: DC 12 V, Maximum Rated Current: 100 mA, Connector: D-Sub9 (socket) x 1 |
|
Sound |
Speaker output, connector: mini-pin jack |
|
CD/DVD-ROM Drive |
DVD-ROM Drive/DVD Multi Drive (option) |
-
*1 Available memory region is around 3.5GB.
-
*2 Depending on the operating temperature and age of unit, the clock can deviate ±300 sec/month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
-
*3 When the dual output with the front module is selected, the DVI-I can be connected to an analog RGB monitor only., ･ When connecting the Pro-face FP3000 Series to the PL-3000B Series, use the Pro-face DVI-D cable (10m) FP-DV01-100.
General Specification
|
International Safety Standards |
|
|
Rated Input Voltage |
DC 24 V |
|
Input Voltage Limits |
DC 19.2 to 28.8 V |
|
Allowable Voltage Drop |
5 ms or less |
|
Power Consumption |
2-slot type: 120 W or less, 4-slot type: 145 W or less |
|
In-Rush Current |
40 A or less |
|
Voltage Endurance |
AC 1,000 V, 20 mA for 1 min (between charging and FG terminals) |
|
Insulation Resistance |
DC 500 V, 10 MΩ or more (between charging and FG terminals) |
|
Surrounding Air Temperature |
5 to 50 ℃: with HDD, 0 to 50 ℃: without HDD*4 |
|
Storage Temperature |
-20 to +60 ℃ |
|
Ambient Humidity |
10 to 90 % RH (Not condensing, wet bulb temperature: 39 ℃ or less. Wet bulb temperature with HDD/DVD drive: 29 ℃ or less) |
|
Storage Humidity |
10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.) |
|
Dust |
0.1 mg/m3 or less (non-conductive levels) |
|
Pollution Degree |
For use in Pollution Degree 2 environment |
|
Atmosphere |
Free of corrosive gases |
|
Air Pressure (altitude range) |
800 to 1,114 hPa (2,000 m above sea level or less) |
|
Vibration Resistance |
With HDD: 10 to 57 Hz Single amplitude 0.075 mm [0.003 in.], 57 to 150 Hz Fixed acceleration 9.8 m/s², X, Y, Z directions for 10 cycles (80 min), Without HDD: IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)*5 |
|
Noise Immunity |
Noise Voltage: 1,500 Vp-p, Pulse Duration: 50 ns, 500 ns, 1 μs, Rise Time: 1 ns, (via noise simulator) |
|
Electrostatic Discharge Immunity |
Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3) |
|
Grounding |
Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals) |
|
Installation Configuration |
Stand-alone |
|
Cooling Method |
Forced air cooling by the CPU fan |
|
Weight Approx. |
2 slot type: 6 kg [13.2 lb] or less (display unit only), 4 slot type: 7.5 kg [16.5 lb] or less (display unit only) |
|
External Dimensions |
2 slot type: W243 x H125.5 x D277 mm [W9.57 x H4.94 x D10.91 in.](Horizontal mounting), 4 slot type: W243 x H176.5 x D277 mm [W9.57 x H4.94 x D10.91 in.](Horizontal mounting) |
-
*4 5 to 45 ℃ during DVD data writing or with a battery.
-
*5 The Vibration Resistance is 1.96 m/s² during DVD drive unit's read/write running.
External Dimensions / Interfaces / Panel Cut-out
|
|
|
|
|
|
|
|
|
Specification of APL3000-BA
PL-3000B
Model: APL3000-BA
/ DDR2 512MB-4GB
Core TM Duo 2.0GHz/Celeron(R)M440 1.86GHz
Functional Specification
|
Supported OS |
Windows® 2000/Windows® XP/Windows® XP Embedded |
|
CPU |
Intel® Core™ Duo 2.0 GHz/Celeron® M 440 1.86 GHz |
|
L2 Cache Memory |
Intel® Core™ Duo 2.0 GHz 2 MB/Celeron® M 440 1.86 GHz 1 MB (Built in the CPU) |
|
Main Memory |
DDR2 SDRAM (PC4200), 512 MB/1 GB/2 GB (SO-DIMM socket x 2 slots)*1 |
|
Chipset |
Intel® 945GME + ICH7M |
|
Graphics Accelerator |
Built in Intel® 945GME |
|
Video Memory |
64 MB or less (When using Windows®) UMA Type |
|
Graphics |
VGA (640 x 480 pixels) to UXGA (1,600 x 1,200 pixels) |
|
BIOS |
Phoenix® TrustedCore™ BIOS |
|
Clock Accuracy |
±180 sec/month (deviation at room temperature and power is OFF)*2 |
|
Interface |
Serial ATA |
Serial ATA Rev. 1.0a x 2, 2.5" HDD Unit or SSD Unit |
|
IDE |
Master: CF Card Slot (Type I/II compatible) x 1, Slave: DVD Drive x 1 |
|
Serial (COM1) |
RS-232C (RS-232C/422/485 switch possible, RI/+5 V switch possible), Connector: D-Sub9 (plug) |
|
Serial (COM2) |
RS-232C (RI/+5 V switch possible), Connector: D-Sub9 (plug) |
|
Serial (COM3) |
RS-232C, Connector: D-Sub9 (plug) |
|
Serial (COM4) |
RS-232C, Connector: D-Sub9 (plug) |
|
Ethernet (LAN1) |
IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T, Connector: Modular jack (RJ-45) x 1 |
|
Ethernet (LAN2) |
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1 |
|
USB (TYPE-A) |
Conforms to USB2.0 (TYPE-A) x 4, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less |
|
Video |
DVI-I OUT, Connector: DVI-I 29 pin (socket) X 1*3 |
|
RAS |
Input (external reset input possible): 2 points, Output 2 points, Rated Voltage: DC 12 V, Maximum Rated Current: 100 mA, Connector: D-Sub9 (socket) x 1 |
|
Sound |
Speaker output, connector: mini-pin jack |
|
CD/DVD-ROM Drive |
DVD-ROM Drive/DVD Multi Drive (option) |
-
*1 Available memory region is around 3.5GB.
-
*2 Depending on the operating temperature and age of unit, the clock can deviate ±300 sec/month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
-
*3 When the dual output with the front module is selected, the DVI-I can be connected to an analog RGB monitor only., ･ When connecting the Pro-face FP3000 Series to the PL-3000B Series, use the Pro-face DVI-D cable (10m) FP-DV01-100.
General Specification
|
International Safety Standards |
|
|
Rated Input Voltage |
AC 100 to 240 V |
|
Input Voltage Limits |
AC 85 to 264 V |
|
Rated frequency |
50/60 Hz |
|
Rated frequency range |
47 to 63 Hz |
|
Allowable Voltage Drop |
1 cycle or less(Voltage drop interval must be 1 second or more.) |
|
Power Consumption |
2-slot type: 120 VA or less, 4-slot type: 145 VA or less |
|
In-Rush Current |
40 A or less |
|
Voltage Endurance |
AC 1,500 V 20 mA for 1 min (between charging and FG terminals) |
|
Insulation Resistance |
DC 500 V, 10 MΩ or more (between charging and FG terminals) |
|
Surrounding Air Temperature |
5 to 50 ℃: with HDD, 0 to 50 ℃: without HDD*4 |
|
Storage Temperature |
-20 to +60 ℃ |
|
Ambient Humidity |
10 to 90 % RH (Not condensing, wet bulb temperature: 39 ℃ or less. Wet bulb temperature with HDD/DVD drive: 29 ℃ or less) |
|
Storage Humidity |
10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.) |
|
Dust |
0.1 mg/m3 or less (non-conductive levels) |
|
Pollution Degree |
For use in Pollution Degree 2 environment |
|
Atmosphere |
Free of corrosive gases |
|
Air Pressure (altitude range) |
800 to 1,114 hPa (2,000 m above sea level or less) |
|
Vibration Resistance |
With HDD: 10 to 57 Hz Single amplitude 0.075 mm [0.003 in.], 57 to 150 Hz Fixed acceleration 9.8 m/s², X, Y, Z directions for 10 cycles (80 min), Without HDD: IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)*5 |
|
Noise Immunity |
Noise Voltage: 1,500 Vp-p, Pulse Duration: 50 ns, 500 ns, 1 μs, Rise Time: 1 ns, (via noise simulator) |
|
Electrostatic Discharge Immunity |
Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3) |
|
Grounding |
Protective grounding: Grounding resistance of 100 Ω, 2 mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals) |
|
Installation Configuration |
Stand-alone |
|
Cooling Method |
Forced air cooling by the CPU fan |
|
Weight Approx. |
2 slot type: 6 kg [13.2 lb] or less (display unit only), 4 slot type: 7.5 kg [16.5 lb] or less (display unit only) |
|
External Dimensions |
2 slot type: W243 x H125.5 x D277 mm [W9.57 x H4.94 x D10.91 in.](Horizontal mounting), 4 slot type: W243 x H176.5 x D277 mm [W9.57 x H4.94 x D10.91 in.](Horizontal mounting) |
-
*4 5 to 45 ℃ during DVD data writing or with a battery.
-
*5 The Vibration Resistance is 1.96 m/s² during DVD drive unit's read/write running.
External Dimensions / Interfaces / Panel Cut-out
|
|
|
|
|
|
|
|
|
Specification of PS3451A-T41-24V
PS-3451A
Model: PS3451A-T41-24V
SVGA / DDR2 256MB-1GB
ULV Celeron(R)M 600MHz
Functional Specification
|
Display Type |
TFT Color LCD |
|
Display Size |
8.4" |
|
Resolution |
800 x 600 pixels (SVGA) |
|
Dot pitch |
W0.213 x H0.213 mm [W0.01 x H0.01 in.] |
|
Effective Display Area |
172.4 x 129.8 mm [W6.79 x H5.11 in.] |
|
Display Colors |
262,144 Colors |
|
Backlight |
CCFL (Replaceable) |
|
Brightness Control |
4 Levels (Adjusted with the software) |
|
Backlight Service Life |
50,000 hrs. or more (continuous operation at 25℃ before backlight brightness decreases to 50% or backlight starts to blink) |
|
Supported OS |
Windows® 2000/Windows® XP/Windows® XP Embedded |
|
CPU |
ULV Intel® Celeron® M 600 MHz |
|
L2 Cache Memory |
512 KB (Built in the CPU) |
|
Main Memory |
DDR SDRAM (PC2700), 256 MB/512 MB/1 GB (SO-DIMM socket x 1 slot) |
|
Chipset |
Intel® 855GME + ICH4 |
|
Graphics Accelerator |
Built in Intel® 855GME |
|
Video Memory |
64 MB or less (When using Windows®) UMA Type |
|
Graphics |
SVGA (800 x 600 pixels) |
|
BIOS |
Phoenix® First BIOS Embedded Pro |
|
Clock Accuracy |
±180 sec. /month (deviation at room temperature and power is OFF)*1 |
|
Touch Panel Type |
Resistive Film (analog) |
|
Touch Panel Resolution |
1,024 X 1,024 |
|
Touch Panel Service Life |
1,000,000 times or more, Sweeping 100,000 times or more |
|
Touch Panel Interface |
Internal USB |
|
Interface |
IDE |
2.5" HDD X 1 (Primary Master), CF Card Slot (Type I/II) X 2 (Primary Slave and Secondary Master) |
|
Serial (COM1) |
RS-232C, Connector: D-Sub9 (plug) |
|
Serial (COM2) |
RS-232C (RS-232C/422/485 switch possible, RI/+5 V switch possible), Connector: D-Sub9 (plug) |
|
Ethernet (LAN1) |
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1 |
|
Ethernet (LAN2) |
IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T, Connector: Modular jack (RJ-45) x 1*2 |
|
USB (TYPE-A) |
Conforms to USB2.0 (TYPE-A) x 4, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less |
|
Sound |
Speaker output, connector: mini-pin jack |
-
*1 Depending on the operating temperature and age of unit, the clock can deviate ±300 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
-
*2 Wake On LAN supported.
General Specification
|
International Safety Standards |
|
|
Rated Input Voltage |
DC 24 V |
|
Input Voltage Limits |
DC 19.2 to 28.8 V |
|
Allowable Voltage Drop |
5 ms or less |
|
Power Consumption |
40 W or less |
|
Voltage Endurance |
AC 500 V, 20 mA for 1 min (between charging and FG terminals) |
|
Insulation Resistance |
DC 500 V, 10 MΩ or more (between charging and FG terminals) |
|
Surrounding Air Temperature |
5 to 45 ℃: with HDD, 0 to 50 ℃: without HDD |
|
Storage Temperature |
-20 to +60 ℃ |
|
Ambient Humidity |
10 to 90 % RH (Not condensing, wet bulb temperature: 39 ℃ or less. Wet bulb temperature with HDD: 29 ℃ or less) |
|
Storage Humidity |
10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.) |
|
Dust |
0.1 mg/m3 or less (non-conductive levels) |
|
Pollution Degree |
For use in Pollution Degree 2 environment |
|
Atmosphere |
Free of corrosive gases |
|
Air Pressure (altitude range) |
800 to 1,114 hPa (2,000 m above sea level or less) |
|
Vibration Resistance |
With HDD: 10 to 25 Hz 4.9 m/s², X,Y,Z directions (30 min), Without HDD: IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration 9.8 m/s², X, Y, Z directions for 10 cycles (100 min) |
|
Noise Immunity |
Noise Voltage: 1,500 Vp-p, Pulse Duration: 50 ns, 500 ns, 1 μs, Rise Time: 1 ns, (via noise simulator) |
|
Noise Immunity (Fast Transient Burst Noise) |
Power Line: 2 kV (IEC/EN61000-4-4), COM Port: 1 kV (IEC/EN61000-4-4) |
|
Electrostatic Discharge Immunity |
Contact Discarge Method: 6kV (IEC/EN61000-4-2 Level 3) |
|
Grounding |
Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals) |
|
Structure |
Equivalent to IP65f (on the front panel when properly installed in an enclosure)*3 |
|
Installation Configuration |
Embedded panel |
|
Cooling Method |
Natural air circulation |
|
Weight Approx. |
3.5 kg [7.7 lb] or less (display unit only) |
|
External Dimensions |
W230 x H177 x D65 mm [W9.06 x H6.97 x D2.56 in.] |
|
Panel Cut Dimensions |
W218.5 x H165.5 mm [W8.6 x H6.52 in.], Panel thickness area: 1.6 to 10 mm [0.06 to 0.39 in.]*4 |
-
*3 The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit's level of resistance is equivalent to these standards, oils that should have, no effect on the GP can possibly harm the unit. This can occur in areas where either, vaporized oils are present, or where low viscosity cutting oils are allowed to adhere, to the unit for long periods of time. If the GP's front face protection sheet becomes, peeled off, these conditions can lead to the ingress of oil into the GP and separate, protection measures are suggested., Also, if non-approved oils are present, it may cause deformation or corrosion of the, front panel’s plastic cover. Therefore, prior to installing the GP be sure to confirm the, type of conditions that will be present in the GP's operating environment., If the installation gasket is used for a long period of time, or if the unit and its gasket, are removed from the panel, the original level of the protection cannot be guaranteed., To maintain the original protection level, be sure to replace the installation gasket, regularly.
-
*4 Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.].
External Dimensions / Interfaces / Panel Cut-out
|
|
|
|
|
|
