Replacement Gaiters

replacement gaiters

Gaiters can be replaced when damaged. Only pneumatic push probes require gaiter rings.

Part Numbers:

Spring Push   Part Number Pneumatic Push Part Number
A6G/1/S D6P/2/S 205014      
AX/1/S DP/2/S 204851 AX/1/P DP/2/P 802691
AX/1.5/S   204851      
AX/2.5/S DP/5/S 204894 AX/2.5/P DP/5/P 802692
AX/5/S DP/10/S 204860 AX/5/P DP/10/P 802693
AX5/1/S DP10/2/S 204860 AX5/1/S DP10/2/P 802693
  DP/12/S 209562   DP/12/P  
AX/10/S DP/20/S 205906 AX/10/P DP/20/P 803235
           
  LE/12/S 209562   LE/12/P 805098
  LE/25/S 205906   LE/25/P 804241
Clamping Collet Ø9.5 mm Ø10 mm

805048 (M4 Screw)
806788 (M3 Screw)

 806460-SX (M4 Screw)

Clamping Collet

 

Clamping Collet

 
For use with all 8 mm clamping shaft sensors. The clamping collet distributes the clamping forces evenly around the shaft. Using the supplied grub screw, the probe can be loosened while holding the collet in place.
Probe Tips Various probes are available. See Probe tips
Imperial Adapter Sleeves

Imperial Adapter Sleeves

Adapter Sleeves can be used to increase the body diameter of 8 mm sensors to 9.512 (3/8"). Available in lengths A from 12 to 127 mm.

Imperial Adapter Sleeves

(Split)

 

Imperial Adapter Sleeves

Split Adapter Sleeves can be used to increase the body diameter of 8 mm sensors to 9.512 (3/8"). Available in lengths A from 12 to 127 mm.

 
 
 

 


Please register here in order to access the download page.
Name: *
Email address: *
Company Name: *
Designation: *
Contact No: *
 
  * Please filled in the required details.