SCIENCEGATE

Contact Us (65) 6561 0488

EchoPod® DX10 Ultrasonic Level Sensor

DOWNLOADS

Data Sheet

Manual

Application

The general purpose ultrasonic level transmitter provides continuous level measurement up to 49.2” (1.25m) with a selectable 0-5 VDC, 0-10 VDC or 976-2000 Hz frequency signal output, and is configured via our free WebCal software. Select the voltage output for interface with analog input cards. Select the frequency output for interface with discrete input cards. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for small day tank, skid, IBC, sump and process tank level applications.

Features

Continuous non-contact level measurement up to 49.2” (1.25m)

Selectable voltage (analog) or frequency (discrete) signal outputs

Configuration is fast and easy via WebCal software and USB adapter

Narrow 2” beam width and short 2” dead band optimized for small tanks

PVDF transducer and 6P polycarbonate enclosure for corrosive liquids

Automatic temperature compensation for accurate measurement

Specifications

Range:	49.2” (1.25m)
Accuracy:	0.125” (3mm)
Resolution:	0.019” (0.5mm)
Dead band:	2” (5cm)
Beam width:	2” (5cm)
Configuration:	WebCal^® PC Windows^®, USB 2.0
Memory:	Non-volatile
Supply voltage:	12-24 VDC
Consumption:	0.5W
Signal Output:	0-5 V, 0-10 V, 976-2000 Hz
Frequency:	Sink current, 15 mA nominal
Signal invert::	5-0 V, 10-0 V, 2000-976 Hz
Signal fail-safe:	Full, empty or hold last
Process temp.:	F: 20° to 140°, C: -7° to 60°
Temp. comp.:	Automatic
Ambient temp.:	F: -31° to 140°, C: -35° to 60°
Pressure:	MWP = 30 PSI (2 bar)
Enclosure rating:	Type 6P, encapsulated, corrosion resistant & submersible
Encl. material:	Polycarbonate
Strain relief mat.:	Santoprene
Trans. material:	PVDF
Cable jacket mat.:	Polyurethane
Cable type:	6-conductor, shielded
Cable length:	48” (1.2m)
Process mount:	1” NPT (1” G)
Mount gasket:	Viton^®
Classification:	General purpose
Compliance:	CE, RoHS
Approvals:	cFMus