BL-1371+COM connection unit : N-R2
If the communication setting of the bar code
reader and the GP is different,
The missing at the time of data reading will occur.
In addition, communication error does not occur
at that time.
Please match the communication must set.
BL-N70UB
-
-
Bar Code Reader
USB
HR-100R
-
-
-
-
-
Two-Dimensional
Code Reader
232C
If it outputs 2byte character, it must be a
corresponding firmware with the HR-100R.
Use Bluetooth.
When using a USBHUB with power,
GP recognize only the first one.
Mars Tohken
Solution
MD-2250 PLUS-ESD
-
-
-
-
Bar Code Reader
USB
TFIR-33NU
-
-
-
-
Two-Dimensional
Code Reader
USB
THIR-3000
-
-
-
-
Two-Dimensional
Code Reader
COM1
THIR-3000H
-
-
-
-
Two-Dimensional
Code Reader
COM1
THIR-3000N
-
-
-
-
-
Two-Dimensional
Code Reader
COM1
THIR-6000B
-
-
-
-
-
Two-Dimensional
Code Reader
USB
Use Bluetooth : TMA-6000U
About Character code
*HID type reader is recognized as a keyboard device.
So 2byte characer can not input the computer.
Can not use the shaded portion of the character code table in EXCEL.
It doesn't confirm about 2byte code.
Can not connect it, If some settings the barcode side are empty.
DS3578
-
-
-
-
-
-
Two-Dimensional
Code Reader
USB
LI2208
-
-
-
-
-
-
Bar Code Reader
232C
Use external power supply.
Can not read by GP If its power ON/OFF.
Please reset GP.
Nichiei Intec
FFTA10A
-
-
-
-
-
Bar Code Reader
COM1
-
-
-
Bar Code Reader
USB
IMPORTANT
-
According to a manufacturing date, the above peripheral equipment might not be connected because a manufacturer changes specification. Be sure to check the operation before starting to use.
-
LT-3201A is not equipped with a serial port, and any barcode readers that requires a COM1 port can not connect to it.
Restrictions on Keyence TL-70U
When the [Code data in] setting is [Data Display], only English one byte characters and symbols can be read.
When the [Code data in] setting is [Internal Device], two bytes characters can not be read.
Restrictions on Tohken THLS-6910USB
GP-Pro EX Ver. 1.01.004 or later is necessary.
Restrictions on IDEC MG113041-000B
Does not work with 5V power supply of a touch panel. Use external power supply.
Restrictions on Opticon OPL-6845-USB
The OPL-6845-USB software version FM22J03 or higher is required.
The system may not work properly if the firmware version of the barcode reader is lower than the above mentioned. Refer to the instruction manual attached to the barcode reader.
It can be operated through a self-powered USB hub.
Software to operate Pro-face HMI screen on iPhone, iPad and iPod touch
-
Pro-face Remote HMI (Android) V*.*
PFXEXRHANDV**
Software to operate Pro-face HMI screen on Android OS
-
Pro-face Remote HMI Free (Android) V*.*
PFXEXRHANDTRV**
Free software to operate Pro-face HMI screen on tablets or smartphones with Android OS
-
*1GP-411xT: Ver. 4.05 or later, GP-410xG/GP-410xW: Ver. 2.60 or later. GP-Pro EX Limited Edition which is able to transfer screens to GP4100 Series monochrome model can be downloaded. GP4100 Series monochrome model can create and transfer only with the Limited Edition.
*2Group License consists of one set of Serial No./Key Code for installation on 10 PCs. (Should be used in the same office. Only supports GP-Pro EX Ver. 3.1.)
*3This is available for the models with Ethernet port.
*4Purchase this product when installing the settings editor and Run time in subsequent PCs.
*5Purchase this license when installing only Run time in subsequent PCs. One license is required for each PC.
Option Items
Product Name
Model No.
Description
Color
Model
Monochrome
Model
UV Protection Sheet
PFXZCFUV43
Ultraviolet protection for the display (1 piece)
-
PFXZCFUV42
-
Screen Protection Sheet
ZC9DS31
Disposable, dirt-resistant sheet for the GP unit's screen (5 sheets/set)
-
Panel Cutout Adapter
PFXZCFAD31
Attachment for mounting GP-411xT into the panel cutout for a GP-410xG/W.
-
RTC Battery Set
PFXZGPRTC1
Module for retaining the system date and time in the event the power is disconnected.
-
Battery for Memory Backup
PFXZGEBT1
Replacement battery for the RTC Battery Set.
-
USB Clamp mini B (1 Port)
ZC9USCLMB1
USB (mini-B) Cable clamp for 1 port products to prevent disconnection (5 clamps/set)
-
Maintenance Items
Product Name
Model No.
Description
Color
Model
Monochrome
Model
4.3-inch Installation Fastener
PFXZCFAF31
Fasteners for installing this product into a panel (2 pieces)
-
4.3-inch Installation Gasket
PFXZCFWG32
Provides dust and moisture resistance when this product is installed into a solid panel (1 piece)
-
Installation Fastener
ZC9AF31
Used to install the GP into a solid panel (2 pieces/set)
-
Installation Gasket
ZC9WG31
Provides dust and moisture resistance when GP is installed into a solid panel (1 piece)
-
COM I/F Connector
ZC9CMC1
Connector for Serial I/F (1 piece) *6
DC Power Supply Connector
ZCACNDCS1
Connector to connect DC power supply cables (5 pieces) *7
USB Clamp Type A (1 Port)
ZC9USCL1
USB (Type A) Cable clamp for 1 port products to prevent disconnection (5 clamps/set)
USB Clamp mini B (1 Port)
ZC9USCLMB1
USB (mini-B) Cable clamp for 1 port products to prevent disconnection (5 clamps/set)
*3 Other font sizes can be set up with the Editor software.
*4 Capacity available for user application.
*5 Application memory can provide 128KB for Data Backup. For further information, please refer to the GP-Pro EX reference manual.
*6 Set up the “Clock Updates“ feature with the Editor software. Please refer to the GP-Pro EX reference manual “Common” - “Clock Update Settings” for details.
*7 If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If you supply
10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.)
Storage Humidity
10 to 90 % RH (Wet bulb temperature: 39 ℃ or less - no condensation.)
Dust
0.1 mg/m³ or less (non-conductive levels)
Pollution Degree
For use in Pollution Degree 2 environment
Atmosphere
Free of corrosive gases
Air Pressure (altitude range)
800 to 1,114 hPa (2,000 m above sea level or less)
Vibration Resistance
IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)
Concussion Resistance
IEC/EN61131-2 compliant, 147 m/s², X, Y, Z directions for 3 times
Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)
Structure
IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)*9
Installation Configuration
Embedded panel
Cooling Method
Natural air circulation
Weight Approx.
0.2 kg [0.4 lb] or less (display unit only)
External Dimensions
W116.5 x H77.5 x D28 mm [W4.59 x H3.05 x D1.1 in.]
Panel Cut Dimensions
W105 x H66 mm [W4.13 x H2.6 in.], Panel thickness area: 1 to 5 mm [0.04 to 0.2 in.]*10
*8 When using in an environment where the temperature becomes or exceeds 40 ℃ for an extended period of time, the screen contrast level may decrease from its original level of brightness.
*9 The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit's level of resistance is equivalent to these standards, oils that should have, no
*10 Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if panel thickness is within recommend range for “Panel Cut Dimensions”, the panel could warp, depending on panel’s material, size, and insta
: Operable
