PFXSTC6300TADDKE / PFXSTC6300TADDCE
Display Specifications
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Display Type TFT Color LCD
Display Size 5.7"
Resolution 640 x 480 pixels
Effective Display Area 115.2 x 86.4 mm (4.54 x 3.40 in)
Display Colors 262,144 colors
For details about display colors, refer to the manual of your screen editing software.
Backlight White LED (White LED (Not replaceable. Please contact customer support.))
Backlight Service Life 50,000 hours or more (continuous operation at 25 °C [77 °F] before backlight brightness decreases to 25%)
Brightness Control 16 levels (Adjusted with touch panel or software)
Touch Panel Type Resistive film (analog, single touch)
Touch Panel Resolution 1,024 x 1,024
Touch Panel lifetime  1,000,000 times or more
 
Electrical Specifications
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Rated Input Voltage 24 Vdc
Input Voltage Limits 19.2 to 28.8 Vdc
Voltage Drop 5 ms or less
Power Consumption  Max 11.3 W
When power is not supplied to external devices 8 W or less
When screen turns off the backlight
(Standby Mode)		 5.6 W or less
In-Rush Current 30 A or less
Noise immunity Noise voltage: 1,000 Vp-p, pulse duration: 1 μs, rise time: 1 ns (via noise simulator)
Voltage Endurance 1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation Resistance 500 Vdc, 10 MΩ or more
 
Environmental Specification
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Certification CE, UL and cUL, UKCA, RCM, KC, ATEX, RoHS, WEEE
Ambient air temperature 0 to 50 °C (32 to 122 °F)
Storage Temperature -20 to 60 °C (-4 to 140 °F)
Ambient air and storage humidity 10%...90% RH (Non condensing, wet bulb temperature 39 °C  [102.2 °F] or less)
Dust 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Corrosive Gases Free of corrosive gases
Air pressure (altitude range)  800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)
Vibration Resistance IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Shock Resistance IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Electrical fasttransient/burst　 IEC 61000-4-4
2 kV: Power port (display unit)
1 kV: Signal ports
Electrostatic Discharge Immunity Contact Discharge Method: 6 kV
Air Discharge Method: 8 kV
(IEC/EN61000-4-2 Level 3)
 
Structural Specification
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Grounding Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country’s applicable standard.
Cooling Method Natural air circulation
Structure*1 IP65F, UL 50/50E, Type 1, Type 4X (indoor use only), Type 13 (on the front panel when properly installed in an enclosure)
External Dimensions 169.5 x 137 x 60 mm
(6.67 x 5.39 x 2.36 in)
Panel Cut Dimensions  156 x 123.5 mm
(6.14 x 4.86 in)
Panel thickness area:1.6...5 mm (0.06...0.2 in)*2
Weight  0.8 kg (1.76 lb) or less

*1The front face of this product, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though this product's level of resistance is equivalent to these standards, oils that should have no effect on this product can possibly harm this product. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to this product for long periods of time. If this product's front face protection sheet or cover glass peels off, these conditions can lead to the ingress of oil into this product and separate protection measures are suggested. Also, if non-approved oils are present, they may cause deformation or corrosion of the front panel's cover. Therefore, prior to installing this product, be sure to confirm the type of conditions that will be present in this product's operating environment. If the installation gasket is used for a long period of time, or if this product and its gasket are removed from the panel, the original level of protection cannot be kept. To maintain the original protection level, be sure to replace the installation gasket regularly.

*2Even if the installation wall thickness is within the recommended range for the Panel Cut Dimensions, depending on the wall's material, size, and installation location of this product and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.
 
Interface Specification
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Serial (COM1)  Asynchronous Transmission: RS-232C/422/485,
Data Length: 7 or 8 bits,
Stop Bit: 1 or 2 bits,
Parity: None, Even or Odd,
Data Transmission Speed: 2,400 to 115,200 bps,
Connector: D-Sub 9 (plug)
USB（Type A)  Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA/port
Maximum transmission distance : 5 m [16.4 ft.]
USB （micro-B） Conforms to USB 2.0 (micro-B) x 1,
Maximum transmission distance : 5 m [16.4 ft]
Ethernet  IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX,
Connector: Modular jack (RJ-45) x 1

DIO

 DIO Connector: 38 pin connector (Model number: CA7-DIOCN5-01)
Cable connection side:
Pin No. Signal name Pin No. Signal name
A1 IN1 B1 IN0 (CT0)*3
A2 IN3 B2 IN2 (CT1)*3
A3 IN5 B3 IN4 (CT2)*3
A4 IN7 B4 IN6 (CT3)*3
A5 IN9 B5 IN8
A6 IN11 B6 IN10
A7 IN13 B7 IN12
A8 IN15 B8 IN14
A9 NC B9 COM
A10 Sink: NC B10 Sink: +24 Vdc
Source: +24 Vdc Source: +24 Vdc
A11 Sink: 0 Vdc B11 Sink: 0 Vdc
Source: NC Source: 0 Vdc
A12 OUT1 (PLS1, PWM1)*4 B12 OUT0 (PLS0, PWM0)*4
A13 OUT3 (PLS3, PWM3)*4 B13 OUT2 (PLS2, PWM2)*4
A14 OUT5 B14 OUT4
A15 OUT7 B15 OUT6
A16 OUT9 B16 OUT8
A17 OUT11 B17 OUT10
A18 OUT13 B18 OUT12
OUT15 B19 OUT14

*3Signal names in parentheses () indicate the counter input used.

*4Signal names in parentheses () indicate the pulse output or PWM output used.
 
Digital Input Specifications
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Input terminal IN0...IN15
Rated voltage 24 Vdc
Maximum allowable voltage 28.8 Vdc
Input type Sink/Source Input
Rated current 2.25 mA
Input resistance 10.7 kΩ
Input points 16
Input points 1
Common design 16-point/1 common line
Operation range ON voltage 15...28.8 Vdc
OFF voltage 0...5 Vdc
ON current 2.25 mA
OFF current 1.0 mA or less
Filtering Normal input 0.5 ms x N (N is 0 to 40)
High-speed counter
(IN0, IN2, IN4, IN6)		 None, 4 μs, or 40 μs
Input signal display No LED indicators
Status display None
Isolation Yes
External connection 38 pin connector (used with Output section)
Cable length Normal input Maximum 50 m (164 ft)
High-speed counter /
Pulse catch input (IN0, IN2, IN4, IN6)		 Maximum 10 m (33 ft)
Input Circuit

(A) 24 Vdc External power supply
(B) Source type
(C) Sink type

 
 
Digital Output Specifications
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Input terminal OUT0...OUT3 OUT4...OUT15
Rated voltage 24 Vdc
Rated voltage range 20.4 Vdc...28.8 Vdc
Output type PFXSTC6300TADDKE: Sink output
PFXSTC6300TADDCE: Source output
Maximum load current 0.3 A/point, total 3.2 A
Minimum load current 1 mA 1 mA
 (Pulse/PWM output unavailable)
Output voltage drop 1.5 Vdc or less
Output delay time OFF to ON (With output at 24 Vdc, 200 mA) 5 μs or less 50 μs or less
ON to OFF (With output at 24 Vdc, 200 mA) 5 μs or less 50 μs or less
Type of output Transistor output
Common lines 2
Common design 8-point/1 common line x 2
External connection 38 pin connector (used with Input section)
Output protection type Output is unprotected
Output points 16
Output signal display No LED indicators
Status display None
Isolation Yes
External power supply For Signal: 24 Vdc
Cable length Normal input Maximum 150 m (492 ft)
Pulse/PWM output Maximum 5 m (16 ft)
Output Circuit: Sink type

A. 24 Vdc External power supply
B. Sink type
C. Dummy resistor*5
Output Circuit: Source type

A. 24 Vdc External power supply
B. Source type
C. Dummy resistor *5
 

*5(Example) If the output current is 24 Vdc 50 mA, the output delay time (OFF to ON) is 1.5 μs. If more responsiveness is required or the load is light, install an external dummy resistor to increase the amount of current.
NOTE: The output terminals are not electrically protected. A short circuit or poor connection of the output wiring may cause burnout of external devices and this product. If there is a risk of the current exceeding the output rating, connect an appropriate fuse to each output terminal.
 
High-Speed Counter
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Input 24 Vdc open collector 24 Vdc open collector
Input points CT0 (IN0), CT1 (IN2), CT2 (IN4), CT3 (IN6) CT0 (IN0), CT1 (IN2) (used as pair)
CT0: A Phase, CT1: B Phase
CT2 (IN4), CT3 (IN6) (used as pair)
CT2: A Phase, CT3: B Phase
Minimum pulse width
(Pulse Input)
Count speed
(Rise, Fall time)
t = 1 μs or less (100 kpps)
Phase 1 phase 90 degree phase differential
2 phase signal
1 phase+ directional signal
High speed count frequency 100 kpps 50 kpps
Count edge designation Available Not available
Count register 32 bit UP/DOWN counter
Counter mode change Set through software
Upper/Lower limit setting Not available
Preload - Prestrobe Available
Marker Input (Counter value clear) None IN3, IN7
 
Pulse Catch Input
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Input 24 Vdc open collector
Input points IN0, IN2, IN4, IN6
Minimum pulse width
(Pulse Input)		 Input signal ON width

t = 5 μs or more
 
Pulse Output
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Output points 4
Output method PLS0...PLS3 (OUT0...OUT3)*6
Load voltage 24 Vdc
Maximum load current 50 mA/1-point
Minimum load current 1 mA
Maximum output frequency Up to 65 kHz/1-point*6
Pulse acceleration / Deceleration speed Available
ON duty 50% ±10% (at 65 kHz)*7

*6Set with the software.

*7ON duty error (10%) is reduced if the output frequency is low.
 
PWM Output
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Output points 4
Output method PWM0...PWM3 (OUT0...OUT3)*8
Load voltage 24 Vdc
Maximum load current 50 mA/1-point
Minimum load current 1 mA
Maximum output frequency Up to 65 kHz/1-point*8
ON duty 19...81% (at 65 kHz)*9

*8Set with the software.

*9ON duty (effective range) is wider if the output frequency is low.
 
Memory
Model No.  PFXSTC6300TADDKE PFXSTC6300TADDCE
Application memory Editor : GP-Pro EX Media FLASH EPROM
Screen area*10 64 MB
User font area 8 MB
Logic program area 132KB(Equivalent to 15,000 steps)
Free space ー
Removable system No
Backup memory Editor : GP-Pro EX Screen area SRAM 320 KB
Variable area SRAM 64 KB
Battery Replaceable battery / Primary battery for clock data backup

*10Use the screen area when the user font area's capacity is exceeded ー for example, when an image font or a picture font is used ー.
 
Panel Cut Dimensions
Based on the panel cut dimensions, open a mount hole on the panel.
A B C
156 mm (+1/-0 mm)
(6.14 in [+0.04/-0 in])		 123.5 mm (+1/-0 mm)
(4.86 in [+0.04/-0 in])		 1.6...5 mm
(0.06...0.2 in)
 
External Dimensions / Parts Identification
  1. Status LED
  2. DIO interface
  3. Battery slot
  4. Power plug connector
  5. Ethernet interface (ETH)
  6. CANopen interface (CAN)
  7. USB (micro-B) interface
  8. USB (Type A) interface
  9. Serial interface (RS-232C/422/485) (COM)
  10. Safety alert symbol
  11. Expansion module interface
  12. CANopen LED
  13. Safety alert symbol
 
 

 

 

STC6000 Series Support / Downloads

Manual

Datasheet / Guide Book

Software

Product Data
 
 

 

 

STC6000 Series Options

Serial Interface

Product Name Model No. Description
RS-422 Terminal Block Conversion Adapter PFXZCBADTM1 Connects output from a serial interface (D-sub 9 pin plug) directly to an RS-422 terminal block.
RS-232C Isolation Unit CA3-ISO232-01 Connects a host controller to this product and provides isolation (RS-232C and RS-422 are switchable).
COM Port Conversion Adapter CA3-ADPCOM-01 Connects optional RS-422 communication items to serial interface.
Terminal Block Conversion Adapter CA3-ADPTRM-01 Connects output from a serial interface with an RS-422 terminal block.

USB (Cables/Adapters)

USB (Type A) Interface

Product Name Model No. Description
USB Front Cable (1 m) CA5-USBEXT-01 Extension cable that attaches USB interface to the front panel.
USB Clamp Type A (1 port) PFXZCBCLUSA1 Clamp to prevent disconnection of USB cable
(USB Type A, 1 port, 5 clamps/set)
USB-Serial (RS-232C) Conversion Cable (0.5 m) CA6-USB232-01 Cable for converting a USB interface into a serial interface (RS-232C).
USB-Serial (RS-422/485) Conversion Adapter* PFXZCBCBCVUSR41 Adapter for connecting this product (USB Type A) to an external device (RS-422/RS-485).
EZ Illuminated Switch PFXZCCEUSG1 A unit of 5 illuminated switches with multiple color LED connected to this product via USB
EZ Tower Light tube mounting with fixing plate PFXZCETWHA1 USB Connection Type Monolithic EZ Tower Light tube mounting with fixing plate 3 tiers, Ø60, lighting and flashing
with a buzzer.
EZ Tower Light with base mounting PFXZCETWW1 USB Connection Type Monolithic EZ Tower with base mounting 3 tiers, Ø60, lighting and flashing with a buzzer.
EZ LAN adapter PFXZCGEUUE1 USB adapter for extending the Ethernet port.

USB (micro-B) interface

Product Name Model No. Description
USB Transfer Cable PFXZUSCBMB2 Cable for transferring screen data from a PC (USB Type A) to this product (USB micro-B)
USB (micro-B) Front Cable PFXZCIEXMB2 Extension cable that attaches USB interface to the front panel.

Modicon TM3 Module

Model No. Description Details Guide Book IO Configurator
TM3DI8 8-ch Sink/Source Inputs (Screw)

Modicon TM3 guidebook
for setting up a connection to HMI

*Before using TM3, be sure to read this TM3 Guide book with recommended substitutes and precautions for replacing the EX module.

TM3BC IO Configurator

*TM3BC IO Configurator software is required to configure TM3BCCO and TM3.
TM3DI8G 8-ch Sink/Source Inputs (Spring)
TM3DI16 16-ch Sink/Source Inputs (Screw)
TM3DI16G 16-ch Sink/Source Inputs (Spring)
TM3DQ8T 8-ch Transistor Source Outputs (Screw)
TM3DQ8TG 8-ch Transistor Source Outputs (Spring)
TM3DQ8U 8-ch Transistor Sink Outputs (Screw)
TM3DQ8UG 8-ch Transistor Sink Outputs (Spring)
TM3DQ8R 8-ch Relay Outputs (Screw)
TM3DQ8RG 8-ch Relay Outputs (Spring)
TM3DQ16TK 16-ch Transistor Source Outputs (HE10)
TM3DQ16UK 16-ch Transistor Sink Outputs (HE10)
TM3DQ16R 16-ch Relay Outputs (Screw)
TM3DQ16RG 16-ch Relay Outputs (Spring)
TM3DM8R 4-ch Sink/Source Inputs,
4-ch Relay Outputs (Screw)
TM3DM8RG 4-ch Sink/Source Inputs,
4-ch Relay Outputs (Spring)
TM3DM24R 16-ch Sink/Source Inputs,
8-ch Relay Outputs (Screw)
TM3DM24RG 16-ch Sink/Source Inputs,
8-ch Relay Outputs (Spring)
TM3AI2H 2-ch Voltage/Current Inputs (Screw)
TM3AI2HG 2-ch Voltage/Current Inputs (Spring)
TM3AQ2 2-ch Voltage/Current Outputs (Screw)
TM3AQ2G 2-ch Voltage/Current Outputs (Spring)
TM3TI4 4-ch Voltage/Current or Temperature Inputs (Screw)
TM3TI4G 4-ch Voltage/Current or Temperature Inputs (Spring)
TM3AM6 4-ch Voltage/Current Inputs,
2-ch Voltage/Current Outputs (Screw)
TM3AM6G 4-ch Voltage/Current Inputs,
2-ch Voltage/Current Outputs (Spring)
TM3TM3 2-ch Temperature or Voltage/Current Inputs,
1-ch Voltage/Current Output (Screw)
TM3TM3G 2-ch Temperature or Voltage/Current Inputs,
1-ch Voltage/Current Output (Spring)
TM3XTRA1 Remote transmitter module
TM3XREC1 Remote receiver module

Software

Product Name Model No. Description
GP-Pro EX Software Licenses and Related Software See Product webpage HMI Screen editor & Logic Programming Software and Related Software
Pro-face Connect See Product webpage "Pro-face Connect" is a ready-to-use solution for Secure Remote Access Over the Internet

Others

Product Name Model No. Description
Screen Protection Sheet 5.7-inch PFXZCBDS61 Disposable, dirt-resistant sheet for 5.7-inch screen (5 sheets/set).
UV Protection Sheet 5.7-inch PFXZCFUV61 Sheet to protect the display from ultraviolet light, for 5.7-inch screen (1 sheet).
Environment Cover 5.7-inch PFXZCBOP61 Disposable, environmental resistant cover for 5.7-inch screen (1 sheet).

Maintenance

* Please purchase when the product is damage or lost.

Product Name Model No. Description
Installation Fastener PFXZC3AT1 Installation fastener (4 pieces/set).
Installation Gasket PFXZHWG31 Provides dust and moisture resistance when this product is installed into a solid panel (1 piece).
DC Power Supply Connector CA5-DCCNM-01 Connector to connect DC power supply cables.
Battery for Data Backup PFXZGEBT1 Primary battery for memory and time data backup (1 piece).
DIO Connector PFXZC7CNXY321 Connectors for interfacing with external I/O devices (5 pieces/set).
TM3 Module Securing Hook PFXZHMSH1 TM3 module securing hook (1 piece).
 
 

 

 

STC6000 Series Features

Refined

We have designed a superior-quality HMI that improves operability and optimizes operations and machine information.
STC6000 with a sophisticated design that transforms the appeal of simple machines.

Aluminum Front Panel

Perfectly finished appearance thanks to CNC machining processing and color coating like a smartphone. The metal frame gives the product a high-grade finish not offered by any other basic HMI.

   hmi_control_stc6000_feature_high_quolity_display
     

Best in class Visualization

Sufficient memory for more high-resolution images to create professional user interfaces.

   hmi_control_stc6000_feature_visualization
 

Simple & Easy

The simple design and easy to reach interfaces help increase productivity and efficiency. From installation, to operation, to maintenance, it is every time convenient.

Easy Access to User Manual

User manual via a QR code on the product label for easy maintenance on filed.

   hmi_control_stc6000_feature_easyaccess

Easy screen transfer

Supports transfer with a general Micro-B cable. No special cable is required.

   hmi_control_stc6000_feature_transfer
     

Easy Migration

Compatible panel cut-out size and software platform.

   ST-6300T-6500T_Easy-migration
 

Connected & Secure

High connectivity with rich interfaces and user-friendly protocols allows you to connect various devices easily. Strong support for OT – IT integration and remote maintenance.

Pro-face Connectivity

Connect directly to a wide range of devices. From IT network to I/O, connect and visualize with ease.
*Pro-Server EX will be supported later.

   hmi_control_stc6000_feature_connectivity
     

Mobilized HMI

Stay connected and informed via your mobile device. Pro-face Remote HMI is a remote monitoring and operating system that simplifies information access by providing system views, including alarm indications for all HMIs.

   hmi_control_stc6000_feature_remotehmi
     

Easily expand HMI features via USB options

EZ Series are USB devices directly connecting to the HMI. Less programming, easier system design, and simplified wiring with less error are EASY.

   hmi_control_stc6000_feature_usboptions
     

Secure remote access solution

"Pro-face Connect" is a ready-to-use solution for remote access over the internet via STC6000 Series without fixed costs per device or machine. The cloud-based "Pro-face Connect" integrates seamlessly into your existing network thanks to HTTPs based and TLS-encrypted communication. Secure access is realized for PCs and mobile devices for simplified connectivity. Pro-face provides IEC62443-3-3 certified cyber-secured solution for remote access management that supports remote diagnosis and trouble-solving not only to the HMI but also for the devices connected via Ethernet. The sophisticated user management also supports larger installed bases or separate service networks.

   ST6000 Pro-face connect
     

Enhanced cybersecurity

Security checking at CPU level against basic intentional attacks


•Need unique key code to download project to HMI target
•Doing security checking during booting

   hmi_control_stc6000_feature_secure
 
 

 

 

STC6000 Series Lineup / Specifications
Display Size Product Name Model No Color Touch Panel Interface Software Details
5.7” (VGA) STC-6300TA 

PFXSTC6300TADDKE
(Digital output sink type)

 262K colors Resistive film (analog) COM1: RS-232C/422/485,
Ethernet x 1,
USB Type A x 1,
USB micro-B x 1,
DIO interface x 1,
Expansion module interface x 1		 GP-Pro EX Specifications
 
 

 

  1. Proface | STC6000 Series
  2. Proface | Easy Harmony iPC | Performance 18.5" Wide DC
  3. Proface | Easy Harmony iPC | Performance 15.6" Wide DC
  4. Proface | Easy Harmony iPC | Optimized 15.6" Wide DC

Page 2 of 126