SCIENCEGATE

  • Home
  • Products
  • Profile
  • About Us
    • Events
    • Career
  • Contacts
 

Contact Us (65) 6561 0488

 

Specifications of PFXSP5500WAD (Display) / PFXSP5B40 (Box Module)

Display Specifications

Display Type TFT Color LCD
Display Size 10.1”
Resolution 1,280 x 800 pixels (WXGA)
Effective Display Area W216.96 x H135.6 mm
(W8.54 x H5.34 in.)
Display Colors 262,144 colors
Backlight White LED
 (Not user replaceable. When replacement is required, contact your local distributor.)
Backlight Service Life 50,000 hours or more (continuos operation at 25 °C [77 °F] 
before backlight brightness decreases to 50%
Brightness Control 0...100 (Adjusted with touch panel or software)
Touch
Panel
Type Resistive Film (analog)
Resolution 1,024 x 1,024
Service Life 1 million times or more
 

Electrical Specifications

Power
Supply
Rated Input Voltage 12...24 Vdc
Input Voltage Limits 10.8...28.8 Vdc
Voltage Drop 12 Vdc: 1.25 ms or less
24 Vdc: 5 ms or less
Power Consumption
(Primary Power Supply
[including power loss])
Max. 43 W
In-Rush Current 30 A or less
Voltage Endurance 1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation Resistance 500 Vdc, 10 MΩ or more (between charging and FG terminals)
 

Environmental Specifications

International
Safety Standard
Physical
Environmen
Surrounding
Air Temperature
0...60 °C (32...140 °F)
Storage Temperature -20...60 °C (-4...140 °F)
Surrounding Air and
Storage Humidity
10%...90% RH (Non condensing, wet bulb temperature
39 °C [102.2 °F] or less)
Dust 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Corrosive Gases Free of corrosive gases
Atmospheric Pressure
(Operating Altitude)
800...1,114 hPa (2,000 m [6,561 ft] or lower)
Mechanical
Environment
Vibration 
Resistance
IEC/EN 61131-2 compliant
5...9 Hz Single amplitude 3.5 mm (0.14 in.)
9...150 Hz Fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Shock Resistance IEC/EN 61131-2 compliant
147 m/s2, X, Y, Z directions for 3 times
Electrical
Environment
Noise Immunity Noise Voltage: 1,000 Vp-p
Pulse Duration: 1 μs
Rise Time: 1 ns
(via noise simulator)
Electrostatic
Discharge Immunity
Contact Discharge Method: 6 kV (IEC/EN 61000-4-2 Level 3)
NOTE: When using any of the options for this product, make sure to check the specifications for any special conditions or cautions that may apply to this product.

Memory

Application Memory Screen Size:  64MB *CFast card
Free Space:  About 5GB*1
Backup Memory NVRAM 320 KB
  1. *1      You can install the applications you have used. As for hardware specifications, the CPU is Intel® AtomTM E6x0 1.3GHz (Single core/Dual thread)' and the main memory is 'DDR2 SDRAM 2GB'. 

Interface Specifications(Box Module)

Serial 
Interface 
COM1
Asynchronous 
Transmission
RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission
Speed
2,400(1,200)...115,200 bps
Connector D-Sub 9 pin (plug)
Serial
Interface 
COM2
Asynchronous 
Transmission
RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission
Speed
2,400(1,200)...115,200 bps
Connector D-Sub 9 pin (plug)
USB
(Type A) 
Interface
Connector USB 2.0 (Type A) x 3
Power Supply 
Voltage
5 Vdc ±5%
Maximum Current 
Supplied
500 mA/port,
1 A total for 3 ports
Maximum Transmission 
Distance
5 m (16.4 ft)
USB
(mini-B)
Interface
Connector USB 2.0 (mini-B) x 1
Maximum Transmission
Distance
5 m (16.4 ft)
Ethernet
Interface
Standard IEEE802.3i/IEEE802.3u/IEEE802.3ab,
10BASE-T/100BASE-TX/1000BASE-T
Connector Modular jack (RJ-45) x 2
SD Card 
Interface
SD Card SD Card Slot(Storage) x 1
CFast Card
Interface
CFast Card CFast Card Slot(System) x 1
CFast Card Slot(Storage) x 1
Expansion Unit
Interface
Expansion Unit Fieldbus Unit x 1
Video
Interface
DVI-D DVI-D OUT
Connector DVI-D 24 pin(socket) x 1
Sound Input
Interface
Sound Input MIC or LINE input(software switch)
Connector MINI-JACK ∅3.5 x 1
Sound Output 
Interface
Speaker Output 300 mW (Rated Load: 8 Ω,
Frequency: 1 kHz)
LINE Output Rated load: 10 kΩ or more
Connector 2-piece terminal block (AUX) x 1
AUX Output
Interface
AUX Output Alarm Output/Buzzer Output
Rated Voltage 24 Vdc
Rated Current 50 mA or less
Connector 2-piece terminal block (AUX) x 1
 

Structural Specifications

Grounding Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, 
or your country’s applicable standard (same for FG and SG terminals).
Cooling Method Natural air circulation
Structure *2 IP66F, IP67F, Type 4X (Indoor Use Only)/13

NOTE: The option is a front USB cover with screw manufactured by Pro-face
 (Model Number PFXZCDCVUS1).
External Dimensions W268.5 x H198.5 x D67 mm (W10.57 x H7.81 x D2.64 in.)
Panel Cut Dimensions W255 x H185 mm (W10.04 x H7.28 in.)*3
Panel thickness area:1.6...5 mm (0.06...0.2 in.)*4
Weight *5 3.4 kg (7.48 lb) or less
  1. *2      The front face of this product, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification.
  2. *3      For dimensional tolerance, everything +1/-0 mm (+0.04/-0 in.) and R in angle are below R3 (R0.12 in.)
  3. *4      Even if the installation wall thickness is within the recommended range for the “Panel Cut Dimensions”, depending on wall’s material, size, and installation location of this product and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.
  4. *5      The weight for the combined unit of Box Module and Display Module equals the sum of the weight for the Modules. 

External Dimensions

Display module and box module combination

Panel Cut-out


(Image of Premium Display)
Model Name A B C
SP-5500WA 255 (+1/-0)
[10.04 (+0.04/-0)]
185 (+1/-0)
[7.28 (+0.04/-0)]
1.6...5 mm
(0.06...0.2 in.)
 

External Dimensions with cables

*1 Rotation area of the fastener
*2 Pitch of center of installation fastener screws
 
 

 

 

Specifications of PFXSP5600WAD (Display) / PFXSP5B10 (Box Module)

Display Specifications

Display Type TFT Color LCD
Display Size 12.1”
Resolution 1,280 x 800 pixels (WXGA)
Effective Display Area W261.12 x H163.2 mm(W10.28 x H6.43 in.)
Display Colors 262,144 colors
Backlight White LED
 (Not user replaceable. When replacement is required, contact your local distributor.)
Backlight Service Life 50,000 hours or more (continuos operation at 25 °C [77 °F]
before backlight brightness decreases to 50%
Brightness Control 0...100 (Adjusted with touch panel or software)
Touch
Panel
Type Resistive Film (analog)
Resolution 1,024 x 1,024
Service Life 1 million times or more
 

Electrical Specifications

Power
Supply
Rated Input Voltage 12...24 Vdc
Input Voltage Limits 10.8...28.8 Vdc
Voltage Drop 12 Vdc: 1.25 ms or less
24 Vdc: 5 ms or less
Power Consumption
(Primary Power Supply
[including power loss])
Max. 45 W
In-Rush Current 30 A or less
Voltage Endurance 1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation Resistance 500 Vdc, 10 MΩ or more (between charging and FG terminals)
 

Environmental Specifications

International
Safety Standard
Physical
Environmen
Surrounding
Air Temperature
0...60 °C (32...140 °F)
Storage Temperature -20...60 °C (-4...140 °F)
Surrounding Air and
Storage Humidity
10%...90% RH (Non condensing, wet bulb temperature
39 °C [102.2 °F] or less)
Dust 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Corrosive Gases Free of corrosive gases
Atmospheric Pressure
(Operating Altitude)
800...1,114 hPa (2,000 m [6,561 ft] or lower)
Mechanical
Environment
Vibration 
Resistance
IEC/EN 61131-2 compliant
5...9 Hz Single amplitude 3.5 mm (0.14 in.)
9...150 Hz Fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Shock Resistance IEC/EN 61131-2 compliant
147 m/s2, X, Y, Z directions for 3 times
Electrical
Environment
Noise Immunity Noise Voltage: 1,000 Vp-p
Pulse Duration: 1 μs
Rise Time: 1 ns
(via noise simulator)
Electrostatic
Discharge Immunity
Contact Discharge Method: 6 kV (IEC/EN 61000-4-2 Level 3)
NOTE: When using any of the options for this product, make sure to check the specifications for any special conditions or cautions that may apply to this product.

Memory

Application Memory Screen Size:  64MB *SD card
Free Space:  None
Backup Memory NVRAM 320 KB
Control Memory 64KB
 

Interface Specifications(Box Module)

Serial
Interface
COM1
Asynchronous 
Transmission
RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission 
Speed
2,400(1,200)...115,200 bps
Connector D-Sub 9 pin (plug)
Serial
Interface 
COM2
Asynchronous
Transmission
RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission
Speed
2,400(1,200)...115,200 bps, 
187,500 bps(MPI)
Connector D-Sub 9 pin (plug)
USB
(Type A)
Interface
Connector B 2.0 (Type A) x 2
Power Supply 
Voltage
5 Vdc ±5%
Maximum Current 
Supplied
500 mA/port
Maximum Transmission
Distance
5 m (16.4 ft)
USB
(mini-B) 
Interface
Connector USB 2.0 (mini-B) x 1
Maximum Transmission
Distance
5 m (16.4 ft)
Ethernet
Interface
Standard IEEE802.3i/IEEE802.3u/IEEE802.3ab,
10BASE-T/100BASE-TX/1000BASE-T
Connector Modular jack (RJ-45) x 2
SD Card 
Interface
SD Card SD Card Slot(System) x 1
SD Card Slot(Storage) x 1
CFast Card
Interface
CFast Card -
Expansion Unit 
Interface
Expansion Unit Fieldbus Unit x 1
Video
Interface
DVI-D -
Connector -
Sound Input
Interface
Sound Input -
Connector -
Sound Output
Interface
Speaker Output 300 mW (Rated Load: 8 Ω,
Frequency: 1 kHz)
LINE Output Rated load: 10 kΩ or more
Connector 2-piece terminal block (AUX) x 1
AUX Output
Interface
AUX Output Alarm Output/Buzzer Output
Rated Voltage 24 Vdc
Rated Current 50 mA or less
Connector 2-piece terminal block (AUX) x 1
 

Structural Specifications

Grounding Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, 
or your country’s applicable standard (same for FG and SG terminals).
Cooling Method Natural air circulation
Structure *1 IP66F, IP67F, Type 4X (Indoor Use Only)/13

NOTE: The option is a front USB cover with screw manufactured by Pro-face
 (Model Number PFXZCDCVUS1).
External Dimensions W308.5 x H230.5 x D67 mm (W12.15 x H9.07 x D2.64 in.)
Panel Cut Dimensions W295 x H217 mm (W11.61 x H8.54 in.)*2
Panel thickness area:1.6...5 mm (0.06...0.2 in.)*3
Weight *4 3.9 kg (8.58 lb) or less
  1. *1     The front face of this product, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification.
  2. *2     For dimensional tolerance, everything +1/-0 mm (+0.04/-0 in.) and R in angle are below R3 (R0.12 in.)
  3. *3     Even if the installation wall thickness is within the recommended range for the “Panel Cut Dimensions”, depending on wall’s material, size, and installation location of this product and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.
  4. *4     The weight for the combined unit of Box Module and Display Module equals the sum of the weight for the Modules. 

External Dimensions

Display module and box module combination

Panel Cut-out


(Image of Premium Display)
Model Name A B C
SP-5600WA 295 (+1/-0)
[11.61 (+0.04/-0)]
217 (+1/-0)
[8.54 (+0.04/-0)]
1.6...5 mm
(0.06...0.2 in.)
 

External Dimensions with cables


(Image of Open Box)
*1 Rotation area of the fastener
*2 Pitch of center of installation fastener screws

 
 
 

 

 

Specifications of PFXSP5600WAD (Display) / PFXSP5B40 (Box Module)

Display Specifications

Display Type TFT Color LCD
Display Size 12.1”
Resolution 1,280 x 800 pixels (WXGA)
Effective Display Area W261.12 x H163.2 mm(W10.28 x H6.43 in.)
Display Colors 262,144 colors
Backlight White LED
 (Not user replaceable. When replacement is required, contact your local distributor.)
Backlight Service Life 50,000 hours or more (continuos operation at 25 °C [77 °F] 
before backlight brightness decreases to 50%
Brightness Control 0...100 (Adjusted with touch panel or software)
Touch
Panel
Type Resistive Film (analog)
Resolution 1,024 x 1,024
Service Life 1 million times or more
 

Electrical Specifications

Power
Supply
Rated Input Voltage 12...24 Vdc
Input Voltage Limits 10.8...28.8 Vdc
Voltage Drop 12 Vdc: 1.25 ms or less
24 Vdc: 5 ms or less
Power Consumption
(Primary Power Supply
[including power loss])
Max. 45 W
In-Rush Current 30 A or less
Voltage Endurance 1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation Resistance 500 Vdc, 10 MΩ or more (between charging and FG terminals)
 

Environmental Specifications

International
Safety Standard
Physical
Environmen
Surrounding
Air Temperature
0...60 °C (32...140 °F)
Storage Temperature -20...60 °C (-4...140 °F)
Surrounding Air and
Storage Humidity
10%...90% RH (Non condensing, wet bulb temperature
39 °C [102.2 °F] or less)
Dust 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Corrosive Gases Free of corrosive gases
Atmospheric Pressure
(Operating Altitude)
800...1,114 hPa (2,000 m [6,561 ft] or lower)
Mechanical
Environment
Vibration 
Resistance
IEC/EN 61131-2 compliant
5...9 Hz Single amplitude 3.5 mm (0.14 in.)
9...150 Hz Fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Shock Resistance IEC/EN 61131-2 compliant
147 m/s2, X, Y, Z directions for 3 times
Electrical
Environment
Noise Immunity Noise Voltage: 1,000 Vp-p
Pulse Duration: 1 μs
Rise Time: 1 ns
(via noise simulator)
Electrostatic
Discharge Immunity
Contact Discharge Method: 6 kV (IEC/EN 61000-4-2 Level 3)
NOTE: When using any of the options for this product, make sure to check the specifications for any special conditions or cautions that may apply to this product.

Memory

Application Memory Screen Size:  64MB *CFast card
Free Space:  About 5GB*1
Backup Memory NVRAM 320 KB
  1. *1      You can install the applications you have used. As for hardware specifications, the CPU is Intel® AtomTM E6x0 1.3GHz (Single core/Dual thread)' and the main memory is 'DDR2 SDRAM 2GB'. 

Interface Specifications(Box Module)

Serial 
Interface 
COM1
Asynchronous 
Transmission
RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission
Speed
2,400(1,200)...115,200 bps
Connector D-Sub 9 pin (plug)
Serial 
Interface 
COM2
Asynchronous
Transmission
RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission
Speed
2,400(1,200)...115,200 bps
Connector D-Sub 9 pin (plug)
USB
(Type A)
Interface
Connector USB 2.0 (Type A) x 3
Power Supply 
Voltage
5 Vdc ±5%
Maximum Current
Supplied
500 mA/port,
1 A total for 3 ports
Maximum Transmission
Distance
5 m (16.4 ft)
USB
(mini-B)
Interface
Connector USB 2.0 (mini-B) x 1
Maximum Transmission
Distance
5 m (16.4 ft)
Ethernet 
Interface
Standard IEEE802.3i/IEEE802.3u/IEEE802.3ab,
10BASE-T/100BASE-TX/1000BASE-T
Connector Modular jack (RJ-45) x 2
SD Card
Interface
SD Card SD Card Slot(Storage) x 1
CFast Card
Interface
CFast Card CFast Card Slot(System) x 1
CFast Card Slot(Storage) x 1
Expansion Unit
Interface
Expansion Unit Fieldbus Unit x 1
Video
Interface
DVI-D DVI-D OUT
Connector DVI-D 24 pin(socket) x 1
Sound Input
Interface
Sound Input MIC or LINE input(software switch)
Connector MINI-JACK ∅3.5 x 1
Sound Output
Interface
Speaker Output 300 mW (Rated Load: 8 Ω,
Frequency: 1 kHz)
LINE Output Rated load: 10 kΩ or more
Connector 2-piece terminal block (AUX) x 1
AUX Output
Interface
AUX Output Alarm Output/Buzzer Output
Rated Voltage 24 Vdc
Rated Current 50 mA or less
Connector 2-piece terminal block (AUX) x 1
 

Structural Specifications

Grounding Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, 
or your country’s applicable standard (same for FG and SG terminals).
Cooling Method Natural air circulation
Structure *2 IP66F, IP67F, Type 4X (Indoor Use Only)/13

NOTE: The option is a front USB cover with screw manufactured by Pro-face
 (Model Number PFXZCDCVUS1).
External Dimensions W308.5 x H230.5 x D67 mm (W12.15 x H9.07 x D2.64 in.)
Panel Cut Dimensions W295 x H217 mm (W11.61 x H8.54 in.)*3
Panel thickness area:1.6...5 mm (0.06...0.2 in.)*4
Weight *5 3.9 kg (8.58 lb) or less
  1. *2      The front face of this product, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification.
  2. *3      For dimensional tolerance, everything +1/-0 mm (+0.04/-0 in.) and R in angle are below R3 (R0.12 in.)
  3. *4      Even if the installation wall thickness is within the recommended range for the “Panel Cut Dimensions”, depending on wall’s material, size, and installation location of this product and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.
  4. *5     The weight for the combined unit of Box Module and Display Module equals the sum of the weight for the Modules. 

External Dimensions

Display module and box module combination

Panel Cut-out


(Image of Premium Display)
Model Name A B C
SP-5600WA 295 (+1/-0)
[11.61 (+0.04/-0)]
217 (+1/-0)
[8.54 (+0.04/-0)]
1.6...5 mm
(0.06...0.2 in.)
 

External Dimensions with cables


 
*1 Rotation area of the fastener
*2 Pitch of center of installation fastener screws
 
 

 

 

Specifications of PFXSP5500TPD (Display) / PFXSP5B10 (Box Module)

Display Specifications

Display Type TFT Color LCD
Display Size 10.4”
Resolution 800 x 600 pixels (SVGA)
Auto Scaling Yes
Effective Display Area W211.2 x H158.4 mm(W8.31 x H6.24 in.)
Display Colors 16 million colors
For details about Display Colors, refer to the manual for your screen editing software.
Backlight White LED 
(Not user replaceable. When replacement is required, contact your local distributor.)
Backlight Service Life 50,000 hours or more (continuos operation at 25 °C [77 °F] 
before backlight brightness decreases to 50%
Brightness Control 0...100 (Adjusted with touch panel or software)
Brightness Sensor Yes
Touch
Panel
Type Resistive Film (analog, multi-touch)
Resolution 1,024 x 1,024
Service Life 1 million times or more

Electrical Specifications

Power
Supply
Rated Input Voltage 12...24 Vdc
Input Voltage Limits 10.8...28.8 Vdc
Voltage Drop 12 Vdc: 1.25 ms or less
24 Vdc: 5 ms or less
Power Consumption
(Primary Power Supply
[including power loss])
Max. 50 W
In-Rush Current 30 A or less
Voltage Endurance 1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation Resistance 500 Vdc, 10 MΩ or more (between charging and FG terminals)

Environmental Specifications

International
Safety Standard
Physical
Environmen
Surrounding
Air Temperature
0...60 °C (32...140 °F)
Storage Temperature -20...60 °C (-4...140 °F)
Surrounding Air and
Storage Humidity
10%...90% RH (Non condensing, wet bulb temperature
39 °C [102.2 °F] or less)
Dust 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Corrosive Gases Free of corrosive gases
Atmospheric Pressure
(Operating Altitude)
800...1,114 hPa (2,000 m [6,561 ft] or lower)
Mechanical
Environment
Vibration 
Resistance
IEC/EN 61131-2 compliant
5...9 Hz Single amplitude 3.5 mm (0.14 in.)
9...150 Hz Fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Shock Resistance IEC/EN 61131-2 compliant
147 m/s2, X, Y, Z directions for 3 times
Electrical
Environment
Noise Immunity Noise Voltage: 1,000 Vp-p
Pulse Duration: 1 μs
Rise Time: 1 ns
(via noise simulator)
Electrostatic
Discharge Immunity
Contact Discharge Method: 6 kV (IEC/EN 61000-4-2 Level 3)
NOTE: When using any of the options for this product, make sure to check the specifications for any special conditions or cautions that may apply to this product.

Memory

Application Memory Screen Size:  64MB *SD card
Free Space:  None
Backup Memory NVRAM 320 KB
Control Memory 64KB

Interface Specifications(Display)

USB 
(Type A)
Interface*1
Connector USB 2.0 (Type A) x 1
Power Supply Voltage 5 Vdc ±5%
Maximum Current
Supplied
500 mA
Maximum Transmission
Distance
5 m (16.4 ft)
USB
(mini-B)
Interface*1
Connector USB 2.0 (mini-B) x 1
Maximum Transmission
Distance
5 m (16.4 ft)
  1. *1     When using the Display Module with the Power Box, you can connect only one of each type of USB device, such as one USB flash drive, one transfer cable, or one bar code reader. If you connect multiple devices that are the same type, only the first device will work.

Interface Specifications(Box Module)

Serial
Interface
COM1
Asynchronous 
Transmission
RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission
Speed
2,400(1,200)...115,200 bps
Connector D-Sub 9 pin (plug)
Serial
Interface
COM2
Asynchronous 
Transmission
RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission 
Speed
2,400(1,200)...115,200 bps, 
187,500 bps(MPI)
Connector D-Sub 9 pin (plug)
USB 
(Type A)
Interface
Connector USB 2.0 (Type A) x 2
Power Supply 
Voltage
5 Vdc ±5%
Maximum Current
Supplied
500 mA/port
Maximum Transmission
Distance
5 m (16.4 ft)
USB
(mini-B)
Interface
Connector USB 2.0 (mini-B) x 1
Maximum Transmission 
Distance
5 m (16.4 ft)
Ethernet
Interface
Standard IEEE802.3i/IEEE802.3u/IEEE802.3ab,
10BASE-T/100BASE-TX/1000BASE-T
Connector Modular jack (RJ-45) x 2
SD Card
Interface
SD Card SD Card Slot(System) x 1
SD Card Slot(Storage) x 1
CFast Card
Interface
CFast Card -
Expansion Unit
Interface
Expansion Unit Fieldbus Unit x 1
Video 
Interface
DVI-D -
Connector -
Sound Input
Interface
Sound Input -
Connector -
Sound Output
Interface
Speaker Output 300 mW (Rated Load: 8 Ω,
Frequency: 1 kHz)
LINE Output Rated load: 10 kΩ or more
Connector 2-piece terminal block (AUX) x 1
AUX Output
Interface
AUX Output Alarm Output/Buzzer Output
Rated Voltage 24 Vdc
Rated Current 50 mA or less
Connector 2-piece terminal block (AUX) x 1

Structural Specifications

Grounding Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, 
or your country’s applicable standard (same for FG and SG terminals).
Cooling Method Natural air circulation
Structure *2 When using a factory-installed front USB cover: IP65F, IP67F.
When using a front USB cover as an option: IP66F, IP67F, Type 4X (Indoor Use Only)/13
* The front face of this product when properly installed in an enclosure and
not using the front panel USB port.
NOTE: The option is a front USB cover with screw manufactured by Pro-face
 (Model Number PFXZCDCVUS1).
External Dimensions W272.5 x H214.5 x D67 mm (W10.73 x H8.44 x D2.64 in.)
Panel Cut Dimensions W259 x H201 mm (W10.2 x H7.91 in.)*3
Panel thickness area: 1.6...5 mm (0.06...0.2 in.)*4
Weight *5 3.6 kg (7.88 lb) or less
  1. *2     The front face of this product, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification.
  2. *3     For dimensional tolerance, everything +1/-0 mm (+0.04/-0 in.) and R in angle are below R3 (R0.12 in.)
  3. *4     Even if the installation wall thickness is within the recommended range for the “Panel Cut Dimensions”, depending on wall’s material, size, and installation location of this product and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.
  4. *5     The weight for the combined unit of Box Module and Display Module equals the sum of the weight for the Modules. 

External Dimensions

Display module and box module combination

Panel Cut-out

Model Name A B C
SP-5500TP 259 (+1/-0)
[10.2 (+0.04/-0)]
201 (+1/-0)
[7.91 (+0.04/-0)]
1.6...5 mm
(0.06...0.2 in.)


External Dimensions with cables


(Image of Open Box)
*1 Rotation area of the fastener
*2 Pitch of center of installation fastener screws
 
 

 

sp5000 Series Lineup
 

Specifications of PFXSP5500TPD (Display) / PFXSP5B40 (Box Module)

Display Specifications

Display Type TFT Color LCD
Display Size 10.4”
Resolution 800 x 600 pixels (SVGA)
Auto Scaling Yes
Effective Display Area W211.2 x H158.4 mm(W8.31 x H6.24 in.)
Display Colors 16 million colors
For details about Display Colors, refer to the manual for your screen editing software.
Backlight White LED 
(Not user replaceable. When replacement is required, contact your local distributor.)
Backlight Service Life 50,000 hours or more (continuos operation at 25 °C [77 °F] 
before backlight brightness decreases to 50%
Brightness Control 0...100 (Adjusted with touch panel or software)
Brightness Sensor Yes
Touch
Panel
Type Resistive Film (analog, multi-touch)
Resolution 1,024 x 1,024
Service Life 1 million times or more

Electrical Specifications

Power
Supply
Rated Input Voltage 12...24 Vdc
Input Voltage Limits I10.8...28.8 Vdc
Voltage Drop 12 Vdc: 1.25 ms or less
24 Vdc: 5 ms or less
Power Consumption
(Primary Power Supply
[including power loss])
Max. 50 W
In-Rush Current 30 A or less
Voltage Endurance 1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation Resistance 500 Vdc, 10 MΩ or more (between charging and FG terminals)

Environmental Specifications

International
Safety Standard
Physical
Environmen
Surrounding
Air Temperature
0...60 °C (32...140 °F)
Storage Temperature -20...60 °C (-4...140 °F)
Surrounding Air and
Storage Humidity
10%...90% RH (Non condensing, wet bulb temperature
39 °C [102.2 °F] or less)
Dust 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Corrosive Gases Free of corrosive gases
Atmospheric Pressure
(Operating Altitude)
800...1,114 hPa (2,000 m [6,561 ft] or lower)
Mechanical
Environment
Vibration 
Resistance
IEC/EN 61131-2 compliant
5...9 Hz Single amplitude 3.5 mm (0.14 in.)
9...150 Hz Fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Shock Resistance IEC/EN 61131-2 compliant
147 m/s2, X, Y, Z directions for 3 times
Electrical
Environment
Noise Immunity Noise Voltage: 1,000 Vp-p
Pulse Duration: 1 μs
Rise Time: 1 ns
(via noise simulator)
Electrostatic
Discharge Immunity
Contact Discharge Method: 6 kV (IEC/EN 61000-4-2 Level 3)
NOTE: When using any of the options for this product, make sure to check the specifications for any special conditions or cautions that may apply to this product.

Memory

Application Memory

Screen Size:  64MB *CFast card

Free Space:  About 5GB*1
Backup Memory NVRAM 320 KB
  1. *1     You can install the applications you have used. As for hardware specifications, the CPU is Intel® AtomTM E6x0 1.3GHz (Single core/Dual thread)' and the main memory is 'DDR2 SDRAM 2GB'. 

Interface Specifications(Display)

USB 
(Type A)
Interface
Connector USB 2.0 (Type A) x 1
Power Supply 
Voltage
5 Vdc ±5%
Maximum Current
Supplied
500 mA
Maximum Transmission
Distance
5 m (16.4 ft)
USB
(mini-B)
Interface
Connector USB 2.0 (mini-B) x 1
Maximum Transmission
Distance
5 m (16.4 ft)

Interface Specifications(Box Module)

Serial 
Interface 
COM1
Asynchronous
Transmission
RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission 
Speed
2,400(1,200)...115,200 bps
Connector D-Sub 9 pin (plug)
Serial
Interface
COM2
Asynchronous 
Transmission
RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission 
Speed
2,400(1,200)...115,200 bps
Connector D-Sub 9 pin (plug)
USB
(Type A) 
Interface
Connector USB 2.0 (Type A) x 3
Power Supply 
Voltage
5 Vdc ±5%
Maximum Current 
Supplied
500 mA/port,
1 A total for 3 ports
Maximum Transmission 
Distance
5 m (16.4 ft)
USB
(mini-B)
Interface
Connector USB 2.0 (mini-B) x 1
Maximum Transmission 
Distance
5 m (16.4 ft)
Ethernet 
Interface
Standard IEEE802.3i/IEEE802.3u/IEEE802.3ab,
10BASE-T/100BASE-TX/1000BASE-T
Connector Modular jack (RJ-45) x 2
SD Card
Interface
SD Card SD Card Slot(Storage) x 1
CFast Card
Interface
CFast Card CFast Card Slot(System) x 1
CFast Card Slot(Storage) x 1
Expansion Unit
Interface
Expansion Unit Fieldbus Unit x 1
Video
Interface
DVI-D DVI-D OUT
Connector DVI-D 24 pin(socket) x 1
Sound Input
Interface
Sound Input MIC or LINE input(software switch)
Connector MINI-JACK ∅3.5 x 1
Sound Output
Interface
Speaker Output 300 mW (Rated Load: 8 Ω,
Frequency: 1 kHz)
LINE Output Rated load: 10 kΩ or more
Connector 2-piece terminal block (AUX) x 1
AUX Output
Interface
AUX Output Alarm Output/Buzzer Output
Rated Voltage 24 Vdc
Rated Current 50 mA or less
Connector 2-piece terminal block (AUX) x 1

Structural Specifications

Grounding Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire,
or your country’s applicable standard (same for FG and SG terminals).
Cooling Method Natural air circulation
Structure *2 When using a factory-installed front USB cover: IP65F, IP67F.
When using a front USB cover as an option: IP66F, IP67F, Type 4X (Indoor Use Only)/13
* The front face of this product when properly installed in an enclosure and 
not using the front panel USB port.
NOTE: The option is a front USB cover with screw manufactured by Pro-face
 (Model Number PFXZCDCVUS1).
External Dimensions W272.5 x H214.5 x D67 mm (W10.73 x H8.44 x D2.64 in.)
Panel Cut Dimensions W259 x H201 mm (W10.2 x H7.91 in.)*3
Panel thickness area:1.6...5 mm (0.06...0.2 in.)*4
Weight *5 3.6 kg (7.88 lb) or less
  1. *2     The front face of this product, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification.
  2. *3     For dimensional tolerance, everything +1/-0 mm (+0.04/-0 in.) and R in angle are below R3 (R0.12 in.)
  3. *4     Even if the installation wall thickness is within the recommended range for the “Panel Cut Dimensions”, depending on wall’s material, size, and installation location of this product and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.
  4. *5     The weight for the combined unit of Box Module and Display Module equals the sum of the weight for the Modules. 

External Dimensions

Display module and box module combination

Panel Cut-out

Model Name A B C
SP-5500TP 259 (+1/-0)
[10.2 (+0.04/-0)]
201 (+1/-0)
[7.91 (+0.04/-0)]
1.6...5 mm
(0.06...0.2 in.)


External Dimensions with cables



 
*1 Rotation area of the fastener
*2 Pitch of center of installation fastener screws

 

 

  1. Proface|SP5000 series| Lineup|SP-5600TP/SP-5B10
  2. Proface|SP5000 series| Lineup|SP-5600TP/SP-5B40
  3. Proface|SP5000 series| Lineup|SP-5660TP/SP-5B40
  4. Proface|SP5000 series| Lineup|SP-5700TP/SP-5B10

Page 97 of 126

  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101

Brands

  • BeanAir
  • Control Techniques
  • Delphin
  • Exemys
  • Flowline
  • Futek
  • Hakko
  • Kansai
  • KARI
  • LCM System
  • Micro Epsilon
  • MIRUS
  • Pavone
  • Proface
  • Solartron Metrology
  • STS
  • Takikawa
  • VALCOM

About Us

  • Events
  • Career
  • Download
  • Contacts
bizSAFE3
PGO9
 

SCIGATE AUTOMATION (S) PTE LTD @ 2025. ALL RIGHTS RESERVED.