CAVO IN PVC

Accessories Cable J.Boxes

DOWNLOADS

Datasheet

Electrics resistamce section. 0.60: <33,500 Ohm / km at 20°C

Insulation resistance;> 200 MOhm x km at 20°C

Mutual capacity:

Inductance:

Operating voltage: 300V

Weight: 117kg/km

Bending radius fixed installation: 55 mm

Temperature range fixed by laying: -20 to +70°C

Standards: CEI 20-22 II, CEI 20-35, IEC 60332-22, IEC 60332-1, IEC 60811

Conductor:

Section nom. 0.60 mm2 tinned copper

Composition: 19x0.20 mm diam. cond. 1:00

Insulation:

R2 PVC fire retardant and halogen low-emission

BI / GI VE / W RS / RA/p>

Nominal diameter of 2.00 mm

Composition: in pairs BI / GI VE / W RS / RA

Session: 3 pairs together in composition round; nominal diameter 7.2 mm on the meeting

Screen tot.: belt/poliest. azz 25/23 30x0.050, conductor of tinned copper drain 7x0.30mm

Sheath east.: RZ PVC fire retardant and low emission of halogen BLUE RAL 5015, nominal diameter 9.25 mm

LC 300

Accessories Electronic Overload Guard

DOWNLOADS

Datasheet

Redundant system with two independent inputs for load cells, according to category 3 standard EN 13849-1:2008, PL d (corresponding to SIL 2 IEC 62061).
Load limiter with double security
Alarm for loadcell malfunctioning or power failure
Supply from 10 to 30 Vdc
4-digit red led service display
Mounting on DIN rail
Operating temperature from -10° to +50°C
Removable screw terminal blocks 5.08

TECHNICAL CHARACTERISTICS LC 300

Power supply:	10÷30 Vdc
Max consumption:	6 W
Insulation:	class III
Display:	numeric; 4-digit, 7-segment red led (h 7 mm)
Filter:	Selectable 0.25 Hz - 3 Hz
Measuring range:	from -3.9 to +3.9 mV/V
Input sensitivity:	0,2 microV
Linearity:	<0.01% of full scale
Thermal drift:	<0.002% of full scale/°C
Internal resolution:	24 bits
Operating temperature:	-10 / +50°C (humidity max 85% non-condensing)
Storage temperature:	-20/+60 °C
Keyboard:	4 mechanical keys
Calibration of zero and full scale:	executable from keyboard
Material:	Polyamide 6.6 UL 94V-0 self extinguishing
Connections:	removable screw terminal blocks 5.08
Load cells Input:	max 4 350 Ohm for both measuring channels
Interruption control load cell cable:	indication on the display and via relay
Logic outputs alarm:	4 relay outputs
2 ANALOGUE OUTPUTS:	4÷20 mA (1 per channel)
Resolution:	16 bit
Calibration:	digital from the keyboard
Impedance:	max 300 Ohms
Linearity:	0.03% of full scale
Thermal drift:	0.002% of full scale/°C
Dim:	136 x 125 x 65 mm (L x H x P); 171 x 125 x 65 mm (L x H x P) Analog
CE Conformity:	EN 61000-6-2, EN 61000-6-3 EMC to EN 61010-1 for electrical safety, EN 13849-1 parts of control systems related to safety

ELECTRICAL CONNECTIONS
PIN	TERMINAL BOARD 5P (LOAD CELL 1)
1	Shield
2	- Excitation
3	+ Signal
4	- Signal
5	+ Excitation
PIN	TERMINAL BOARD 5P (LOAD CELL 2)
6	Shield
7	- Excitation
8	+ Signal
9	- Signal
10	+ Excitation

PIN	TERMINAL BOARD 14P
1	RP2 Channel 2 Prealarm Relay. COM
2	RP2 Channel 2 Prealarm Relay. NC
3	RP2 Channel 2 Prealarm Relay. NO
4	RP2 Channel 2 Lookout Relay. COM
5	RP2 Channel 2 Lookout Relay. NC
6	RP2 Channel 2 Lookout Relay. NO
7	RP1 Channel 2 Prealarm Relay. COM
8	RP1 Channel 2 Prealarm Relay. NC
9	RP1 Channel 2 Prealarm Relay. NO
10	RP1 Channel 2 Lookout Relay. COM
11	RP1 Channel 2 Lookout Relay. NC
12	RP1 Channel 2 Lookout Relay. NO
13	Power supply -
14	Power supply + (10-30 Vdc)

LC 200

Accessories Electronic Overload Guard

DOWNLOADS

Datasheet

Weight control detected by early warning and alarm thresholds
Cell malfunction alarm or power failure
Power supply 12 to 24V AC or DC
6 red LED digit display
Mounting on DIN rail
Operating temperature -10 ° to +50 ° C
5.08 plug-in screw terminal

TECHNICAL CHARACTERISTICS LC 200

Power supply:	12÷24 Vcc / Vca ±15%
Maximum consumption:	5 VA
Insulation:	Class III
Display:	6 digit numeric, red LED 7-segment (h 14 mm)
Filter:	Selectable 0,1 Hz - 80 Hz
Led:	5 LED indicators -3 mm-
Decimal:	0 to 3 decimal digits
Measuring range:	from -3,9 to +3,9 mV/V
Input sensitivity:	0,02 microV
Linearity:	<0.01% of full scale
Thermal drift:	<0.001% of full scale/°C
Internal resolution:	24 bits
Temperature range:	-10/+50 °C
Storage temperature:	-20/+60 °C
Keyboard:	4 mechanical keys
Zero and full scale:	Executable from the keyboard
Supporting material:	Polyamide 6.6 UL 94V-0 flame retardant
Connections:	5.08 plug-in screw terminal
Load cells input:	Max 4 da 350 Ohms
Break control cells cables:	Display indication and via relay
Logic outputs alarm:	2 relay outputs (24 Vdc / Vac a contact)
	1 relay output (24 Vdc/Vac a contact)
Logic inputs:	N°1 opto-isolated dry contact
Serial ports:	RS232 or RS485
Baud rate:	Up to 115 kb/s (default 9600 b/s)
Max cable length:	15m (RS232) and 1000 m (RS485)
Optional analog output:	Voltage: 0 to 10 V/0 to 5V, Current: 0 to 20 mA/4 to 20 mA
Dimensions:	113 x 93 x 65 mm (L x P x H)
Conformity:	EN 61000-6-2, EN 61000-6-3 for EMC, EN 61000-1 for electrical safety

ELECTRICAL CONNECTIONS
PIN	TERMINAL BOARD 6P (LOAD CELL)
1	- Excitation
2	+ Excitation
3	+ Sense
4	- Sense
5	- Signal
6	+ Signal

PIN	TERMINAL BOARD 18P
7	TX RS232
8	RX RS232
9	Serial GND
10	TX/RX + RS485
11	TX/RX - RS485
12	Input (potential free)
13	Input (potential free)
14	Power supply + (12-24 Vca/cc)
15	Power supply -
16	+ Analog Output
17	GND Analog Output
18	Common Relè 1
19	NA Relè 1
20	Common Relè 2
21	NA Relè 2
22	Common Relè 3
23	NA Relè 3
24	NC Relè 3

LP542S

Accessories Thermal Labeller

DOWNLOADS

Datasheet

Direct thermal labeller with peel-off as standard
Quick emission of labels
High print resolution
Compact size
Ideal for printing in any industrial environment

TECHNICAL CHARACTERISTICS LP542S

Print Method:	direct thermal
Print resolution:	203 dpi (8 dots/mm)
Print speed:	up to 127 mm/s
Maximum print length:	1016 mm
Maximum print width:	108 mm
Label length:	from 10 mm to 999 mm
Label width:	from 20 mm to 112 mm
Thickness label:	from 0.06 mm to 0.19 mm
Roll dimension:	127 mm OD (5.0" OD)
Fonts:	8 alphanumeric fonts fixed, one true type fonts with rotation at 0, 90, 180, and 270
Barcodes available:	code 39, code 39C, code 93, code 128uCC, Code 128 (subsets A, B, C) Codabar, Interleave 2 of 5, EAN-8, EAN-13, EAN-128, UPC-A, UPC-E, EAN and UPC 2 (5) digits add-on, MSI, Plessey, POSTNET, China Post, ITF-14, EAN14
2D barcodes available:	PDF-417, MAXICODE, DATA MATRIX, QR code
Memory:	2 MB DRAM, 2 MB Flash Memory
Interfaces:	RS 232 serial, parallel, USB 1.1
Dimensions:	240x200x164 mm
Power supply:	switching 100/240 VAC, 3.75A 24V DC (external adapter)
Operating temperature:	from 5° to 40° C
Standard connection cable:	length 1.5 m

The weighing systems are now essential in all industries, from chemical to steel, from food to pharmaceutical, and they make it possible the control and plan the production with an unprecedented accuracy. But weighing systems for the industry does not only consist of devices that perform effectively the weighing process: there are many other instruments, from weight indicators, to transmitters, to dosing/batching tools, which help to complete the framework, allowing the weighing systems to be not only great "scales" but real active components of a production plant.