VIDEO
MCT 1302 Setting with Tester 1006
VIDEO
Tester 1006 Theoretcal Calibration
VIDEO
Tester 1006 Weighing System Testing
TESTER 1006
Weighing Instrumentation Weight Transmitters
For the simultaneous control of up to 4 load cells in any weighing system
Direct operation as Calibrator and peak detector
Upload and download function for programming tools and DAT series MC 302
For the correct mechanical installation and fault diagnosis
Comes with cable for connection to our junction boxes / sum mod. CEM 4 / C and CGS 4 / C
The simultaneous display of each individual load cell signal is used to control the entire weighing system, the weight distribution, overloads, the faulty cells or faulty connections
TECHNICAL TESTER 1006
Encoder supply:
5 VDC / 60 mA (max 4 x 350 ohm cells in parallel)
Measuring range:
from -3.9 to +3.9 mV / V
Linearity:
<0.01% of full scale
Temperature drift:
<0.001% FS / ° C
Display:
Chart 3 "
A / D converter:
24 bits
Internal resolution:
> 16,000,000 points
Viewable resolution:
50,000 divisions
Divisions value (selectable):
x1, x2, x5
Settable decimal:
0.0; 0.00; 0,000
Keyboard:
16 buttons + on / off
Power tool:
4 AA batteries - Power consumption 5 W
Absorption:
125 ÷ 190 mA
Autonomy:
about 4 hours with alkaline batteries, about 8 hours with rechargeable Ni-MH 1.2 V (2000 mAh)
Operating temperature:
-10 To +50 ° C (max 85% humidity non-condensing)
Storage temperature:
-20 To +70 ° C
Degree of protection:
IP54
Weight:
500 g approx
Connections to the load cells:
Sub-D 25-pin connector and its cable length 2m
Tools connections:
Sub-D 25-pin connector and cable length 0.5m
CALIBRATOR
Precision:
0.033% of FS
Supply voltage cells:
3 ÷ 12 Vdc
Signal:
-3 ÷ +20.3 mV
Impedance:
Selectable 350/700 Ohm, or set 300 to 4500 Ohm
AD SYSTEM
Weighing Instrumentation Weight Transmitters
The ADVANCED DIGITAL SYSTEM allows the digital management of analog load cells
RS232 and RS422 / RS485 output, ASCII protocol or MODBUS RTU; Optional Protocols: PROFIBUS, DEVICENET and ETHERNET
Maximum displayed weight: up to 600,000 divisions on payload
The ADVANCED DIGITAL SYSTEM consists of two elements: the special junction box and the reading instrument
AD SYSTEM SPECIFICATIONS
transducers Power:
5 V (short circuit protected)
Measuring range:
from -1.0 to +3.5 mV / V
Input sensitivity:
12:02 micronV / Division
Linearity:
± 0.01% of FS
Thermal drift:
± 0.001% FS / ° C
Display:
LCD, alphanumeric
A / D converter:
24 bits (over 16,000,000 divisions)
Conversion speed A / D:
from 6 to 12 updates per second on each cell (it depends on the n ° of cells)
Filter:
selectable from 0.1 to 25 Hz
Calibration:
with test certificates, sample weights table
Keyboard:
4 membrane keys
Power tool:
24 Vdc ± 15% - Absorbed Power 10W
Operating temperature:
-10 to +50 ° C
Storage temperature:
-20 to +70 ° C
Logic outputs:
2 relays (dry contacts NA) -115 Vac / 30 Vdc 0.5 A
Logic inputs:
2 optoisolated 24 VDC PNP
Serial port:
RS232 or RS422 / RS485
Transmission distance:
15m (RS232C), 1000m (RS422 and RS485)
Fieldbus protocol:
PROFIBUS, DEVICENET, ETHERNET (optional)
Standard protocol:
ASCII, Modbus RTU
Baud rate:
1200 ÷ 115200 selectable
Optional analog output:
optoisolated to 16 Bit. Voltage: 0 ÷ 5 / 10V (R min10 K Ohm). Current: 0/4 ÷ 20mA (R max 300 Ohm)
Regulatory Compliance:
EN61000-6-2, EN61000-6-3
UWT 600
Weighing Instrumentation Weight Transmitters
DIN rail mounting
RS232 and RS422 / RS485 output, ASCII protocol or MODBUS RTU
High performance and reliability
Options:
PROFIBUS, DeviceNet, Ethernet
Analog output
Ability to configure the instrument with two options simultaneously
SPECIFICATIONS UWT 600
transducers Power:
5 V (max 8 350 Ohm cells)
Measuring range:
÷ -1.5 +3.5 mV / V
Input sensitivity:
00:02 MicroV / Division
Linearity:
± 0.01% SN
Thermal drift:
SN ± 0.001% / ° C
Display:
LCD, alphanumeric, backlit, 2 rows x 16 characters
A / D converter:
24-bit
Internal resolution:
> 16,000,000 points
Viewable resolution:
600,000 divisions
Divisions value (selectable):
x1, x2, x5
Set Decimal:
0.0; 0:00; 0000
Filter:
selectable 0.1 to 25 Hz
Keyboard:
4 membrane keys
Power tool:
24 Vdc ± 15% - 12 W
Operating temperature:
-10 ÷ + 50 ° C (max 85% relative humidity without condensation)
Storage temperature:
-20 ÷ + 70 ° C
Logic outputs:
2 relays (contacts cleaned NA) - 115 VAC / 30 VDC, 0.5 A
Logic inputs:
2 optoisolated 24 VDC PNP
Serial port:
COM1: RS232 COM2: RS422 / RS485
Transmission distance:
15m (RS232C), 1000m (RS422 and RS485)
Fieldbus protocol:
PROFIBUS, DEVICENET, ETHERNET (optional)
Serial protocol:
ASCII, Modbus RTU
Baud rate:
1200 ÷ 115200 selectable
Analogue output (optional):
optoisolated 16-Bit Voltage: 0 ÷ 5 / 10V (R min10 K Ohm), Current: 0/4 ÷ 20mA (R max 300 Ohm)
Regulatory Compliance:
EN61000, EN61000 EMC; EN61010-1 for Electrical Safety
Electric connections:
Terminal screw, step 5 mm
Dimensions:
100 x 75 x 110 mm (L x H x D)
