 |
|
|
DAT 500/ANALOG
Weighing Instrumentation Weight Transmitters
|
|
|
 |
-
Output RS232 or RS422 / RS485, MODBUS RTU or ASCII protocols
-
High performance and reliability
-
Upload and download function for programming with TESTER 1006
-
The connection can also occur through the external converter
-
Linearisation 10 points
-
Calibration executable with the transducers Certificates
-
Configuration and calibration from the front or from PC via RS232 / RS485 serial port with Inovation ™ program
-
(MS Windows)
|
 |
TECHNICAL DAT 500 / ANALOG
transducers Power:
|
5 V (max 6 350 Ohm cells) |
|
Measuring range: |
from -0.5 to +3.5 mV / V (optional from -3.9 to +3.9 mV / V) |
|
Input sensitivity: |
00:02 MicroV / Division |
|
Linearity: |
<0.01% of full scale |
|
Thermal drift: |
<0.001% of full scale / ° C |
|
Display: |
6 digits, red 7-segment LED, height 14 mm |
|
A / D converter: |
24-bit |
|
Internal resolution: |
> 16,000,000 points |
|
Viewable resolution: |
60,000 displayable divisions on net weight |
|
Divisions value (selectable): |
x1, x2, x5 |
|
Set Decimal: |
0.0; 0:00; 0000 |
|
Filter: |
selectable from 0.1 to 25 Hz |
|
Power tool: |
24 VDC ± 15% - absorbed power 5 W |
|
Operating temperature: |
-10 ÷ + 50 ° C (max 85% relative humidity without condensation) |
|
Storage temperature: |
-20 ÷ + 70 ° C |
|
Logic outputs: |
2 optisolate; MAX 24 V DC / 100 mA each. |
|
Logic inputs: |
2 optoisolated 24V dc PNP (external power supply) |
|
Serial port: |
RS232C or RS422 / RS485 Modbus RTU or ASCII protocols |
|
Transmission distance: |
15m (RS232C), 1000m (RS422 and RS485) |
|
Peak Hold function: |
for dynamic measurements |
|
Baud rate: |
2400, 9600, 19200, 38400, 115200 Selectable |
|
Analog output: |
optoisolated 16-Bit Voltage: 0 ÷ 5 / 10V (R min10 K Ohm), Current: 0/4 ÷ 20mA (R max 300 Ohm) |
|
Regulatory Compliance: |
EN61326-1, EN55011 and EN55014 EMC; EN61010-1 for Electrical Safety |
|
Electric connections: |
Terminal screw, step 5 mm |
|
Dimensions and weight: |
96 x 48 x 120 mm (L x H x P); 250 g |
|
BCD Output: |
optional |
|
Optional Bipolar output: |
bipolar version ± 10V |
|
|
|
|
|
|
|
|
|
DAT 500
Weighing Instrumentation Weight Transmitters
|
|
|
 |
-
Output RS232 or RS422 / RS485, MODBUS RTU or ASCII protocols
-
High performance and reliability
-
Upload and download function for programming with TESTER 1006
-
The connection can also occur through the external converter
-
Linearisation 10 points
-
Calibration executable with the transducers Certificates
-
Configuration and calibration from the front or from PC via RS232 / RS485 serial port with Inovation ™ program
-
(MS Windows)
|
 |
TECHNICAL DAT 500
transducers Power:
|
5 V (max 6 350 Ohm cells) |
|
Measuring range: |
from -0.5 to +3.5 mV / V (optional from -3.9 to +3.9 mV / V) |
|
Input sensitivity: |
00:02 MicroV / Division |
|
Linearity: |
<0.01% of full scale |
|
Thermal drift: |
<0.001% of full scale / ° C |
|
Display: |
6 digits, red 7-segment LED, height 14 mm |
|
A / D converter: |
24-bit |
|
Internal resolution: |
> 16,000,000 points |
|
Viewable resolution: |
60,000 displayable divisions on net weight |
|
Divisions value (selectable): |
x1, x2, x5 |
|
Set Decimal: |
0.0; 0:00; 0000 |
|
Filter: |
selectable from 0.1 to 25 Hz |
|
Power tool: |
24 VDC ± 15% - absorbed power 5 W |
|
Operating temperature: |
-10 ÷ + 50 ° C (max 85% relative humidity without condensation) |
|
Storage temperature: |
-20 ÷ + 70 ° C |
|
Logic outputs: |
2 optisolate; MAX 24 V DC / 100 mA each. |
|
Logic inputs: |
2 optoisolated 24V dc PNP (external power supply) |
|
Serial port: |
RS232C or RS422 / RS485 Modbus RTU or ASCII protocols |
|
Transmission distance: |
15m (RS232C), 1000m (RS422 and RS485) |
|
Peak Hold function: |
for dynamic measurements |
|
Baud rate: |
2400, 9600, 19200, 38400, 115200 Selectable |
|
Regulatory Compliance: |
EN61326-1, EN55011 and EN55014 EMC; EN61010-1 for Electrical Safety |
|
Electric connections: |
Terminal screw, step 5 mm |
|
Dimensions and weight: |
96 x 48 x 120 mm (L x H x P); 250 g |
|
Optional Bipolar output: |
bipolar version ± 10V |
|
|
|
|
|
|
|
|
|
|
DAT 400 THEORETICAL CALIBRATION
|
DAT 400 CALIBRATION WITH A PROOF WEIGHT
|
|
DAT 400/DEVICENET
Weighing Instrumentation Weight Transmitters
|
|
|
 |
-
WORLD EXCLUSIVE Pavone systems, high performance and reliability
-
Upload and download function for programming with TESTER 1006
-
Also available with DEVICENET
-
Linearisation 10 points
-
Calibration executable with the transducers Certificates
-
Configuration and calibration from the front panel or from PC via USB
|
 |
TECHNICAL DAT 400 / DEVICENET
transducers Power:
|
5 V (max 6 350 Ohm cells) |
|
Measuring range: |
÷ -0.5 +3.5 mV / V (optional ÷ -3.9 +3.9 mV / V) |
|
Input sensitivity: |
00:02 MicroV / Division |
|
Linearity: |
<0.01% FS |
|
Thermal drift: |
<0.001% FS / ° C |
|
Display: |
6 digits, red 7-segment LED, height 14 mm |
|
A / D converter: |
24-bit |
|
Internal resolution: |
> 16,000,000 points |
|
Viewable resolution: |
60,000 displayable divisions on net weight |
|
Divisions value (selectable): |
x1, x2, x5 |
|
Set Decimal: |
0.0; 0:00; 0000 |
|
Filter: |
selectable 0.1 to 25 Hz |
|
Keyboard: |
4 keys tactile feedback disabilitabili |
|
Power tool: |
24 Vdc ± 15% - absorbed power 5 W |
|
Operating temperature: |
-10 / + 50 ° C (max 85% relative humidity without condensation) |
|
Storage temperature: |
-20 / + 70 ° C |
|
Logic outputs: |
2 optoisolated; MAX 24 VDC / 100 mA cad |
|
Logic inputs: |
2 optoisolated PNP at 24 VDC (external power supply) |
|
Serial port: |
USB, RS-232 with Modbus RTU or ASCII protocols |
|
Transmission distance: |
15m (RS232C) |
|
Peak Hold function: |
for dynamic measurements |
|
Baud rate: |
2400, 9600, 19200, 38400, 115200 selectable (RS232) |
|
Regulatory Compliance: |
EN61326-1, EN55011 and EN55014 EMC; EN61010-1 for Electrical Safety |
|
Electric connections: |
Terminal screw, step 5 mm |
|
Dimensions and weight: |
106 x 90 x 58 mm (L x H x P); 250 g |
|
Communication protocols: |
DEVICENET |
|
|
|
|
|
|
|
|
|
|
DAT 400 THEORETICAL CALIBRATION
|
DAT 400 CALIBRATION WITH A PROOF WEIGHT
|
|
DAT 400/PROFINET
Weighing Instrumentation Weight Transmitters
|
|
|
 |
-
WORLD EXCLUSIVE Pavone systems, high performance and reliability
-
Upload and download function for programming with TESTER 1006
-
Connects directly to the fieldbus with TCP protocols, ModuBus / TCP, UDP, IP, ICMP, ARP
-
Also available with PROFINET
-
Linearisation 10 points
-
Calibration executable with the transducers Certificates
-
Configuration and calibration from the front panel or from PC via USB
|
 |
TECHNICAL DAT 400 / PROFINET
transducers Power:
|
5 V (max 6 350 Ohm cells) |
|
Measuring range: |
÷ -0.5 +3.5 mV / V (optional ÷ -3.9 +3.9 mV / V) |
|
Input sensitivity: |
00:02 MicroV / Division |
|
Linearity: |
<0.01% FS |
|
Thermal drift: |
<0.001% FS / ° C |
|
Display: |
6 digits, red 7-segment LED, height 14 mm |
|
A / D converter: |
24-bit |
|
Internal resolution: |
> 16,000,000 points |
|
Viewable resolution: |
60,000 displayable divisions on net weight |
|
Divisions value (selectable): |
x1, x2, x5 |
|
Set Decimal: |
0.0; 0:00; 0000 |
|
Filter: |
selectable 0.1 to 25 Hz |
|
Keyboard: |
4 keys tactile feedback disabilitabili |
|
Power tool: |
24 Vdc ± 15% - absorbed power 5 W |
|
Operating temperature: |
-10 / + 50 ° C (max 85% relative humidity without condensation) |
|
Storage temperature: |
-20 / + 70 ° C |
|
Logic outputs: |
2 optoisolated; MAX 24 VDC / 100 mA cad |
|
Logic inputs: |
2 optoisolated PNP at 24 VDC (external power supply) |
|
Serial port: |
USB, RS-232 with Modbus RTU or ASCII protocols |
|
Transmission distance: |
15m (RS232C) |
|
Peak Hold function: |
for dynamic measurements |
|
Baud rate: |
2400, 9600, 19200, 38400, 115200 selectable (RS232) |
|
Regulatory Compliance: |
EN61326-1, EN55011 and EN55014 EMC; EN61010-1 for Electrical Safety |
|
Electric connections: |
Terminal screw, step 5 mm |
|
Dimensions and weight: |
106 x 90 x 58 mm (L x H x P); 250 g |
|
Communication protocols: |
PROFINET |
|
|
|
|
|
|
|
|
|
|
DAT 400 THEORETICAL CALIBRATION
|
DAT 400 CALIBRATION WITH A PROOF WEIGHT
|
|
DAT 400/ETHERNET
Weighing Instrumentation Weight Transmitters
|
|
|
 |
-
WORLD EXCLUSIVE Pavone systems, high performance and reliability
-
Upload and download function for programming with TESTER 1006
-
Connects directly to the fieldbus 10/100 Ethernet with TCP protocols, ModuBus / TCP, IP
-
Linearisation 10 points
-
Calibration executable with the transducers Certificates
-
Configuration and calibration from the front panel or from PC via USB
|
 |
TECHNICAL DAT 400 / ETHERNET
transducers Power:
|
5 V (max 6 350 Ohm cells) |
|
Measuring range: |
÷ -0.5 +3.5 mV / V (optional ÷ -3.9 +3.9 mV / V) |
|
Input sensitivity: |
00:02 MicroV / Division |
|
Linearity: |
<0.01% FS |
|
Thermal drift: |
<0.001% FS / ° C |
|
Display: |
6 digits, red 7-segment LED, height 14 mm |
|
A / D converter: |
24-bit |
|
Internal resolution: |
> 16,000,000 points |
|
Viewable resolution: |
60,000 displayable divisions on net weight |
|
Divisions value (selectable): |
x1, x2, x5 |
|
Set Decimal: |
0.0; 0:00; 0000 |
|
Filter: |
selectable 0.1 to 25 Hz |
|
Keyboard: |
4 keys tactile feedback disabilitabili |
|
Power tool: |
24 Vdc ± 15% - absorbed power 5 W |
|
Operating temperature: |
-10 / + 50 ° C (max 85% relative humidity without condensation) |
|
Storage temperature: |
-20 / + 70 ° C |
|
Logic outputs: |
2 optoisolated; MAX 24 VDC / 100 mA cad |
|
Logic inputs: |
2 optoisolated PNP at 24 VDC (external power supply) |
|
Serial port: |
USB, RS-232 with Modbus RTU or ASCII protocols |
|
Transmission distance: |
15m (RS232C) |
|
Peak Hold function: |
for dynamic measurements |
|
Baud rate: |
2400, 9600, 19200, 38400, 115200 selectable (RS232) |
|
Regulatory Compliance: |
EN61326-1, EN55011 and EN55014 EMC; EN61010-1 for Electrical Safety |
|
Electric connections: |
Terminal screw, step 5 mm |
|
Dimensions and weight: |
106 x 90 x 58 mm (L x H x P); 250 g |
|
Communication protocols: |
10/100 Ethernet with TCP protocols, ModuBus / TCP, IP |
|
|
|
|
|
|
