VIDEO
Futek LSB200 with Pavone Sistemi DAT1400
VIDEO
DAT1400 - THEROTICAL CALIBRATION
VIDEO
DAT1400 - CALIBRATION WITH A PROOF WEIGHT
DAT 1400 AN/RS485 MOD
Weighing Instrumentation Weight Transmitters
Acquisition frequency signal A / DC up to 1000 Hz
DATALOGGER function (optional)
Capacitive keyboard and removable screw terminal blocks
Bus contemporary Availability of Field and Analog Output
Mounting Type: DINRAIL & front panels (optional)
Also available in Analog-Bipolar Version
Future Options: - Two weighing channels indipendenti
- Analog voltage input or current
- Connection (RS485 and power supply) to I-BOX external
DAT 1400 FEATURES AN / RS485 MOD
transducers Power:
5 Vdc (max 8 350-Ohm load cells in all)
Measuring range:
÷ -3.9 +3.9 mV / V
Input sensitivity:
00:02 MicroV / div
Linearity:
<0.01% FS
Thermal drift:
<0.001% FS / ° C
Display:
6 digits, red 7-segment LED, height 14mm
A / D converter:
24-bit
Internal resolution:
> 16,000,000 points
Signal Acquisition frequency:
12 to 1000 Hz
Viewable resolution:
999,999 displayable divisions on net weight
Divisions value (selectable):
x1, x2, x5, x10, x20, x50
Set Decimal:
0.0; 0:00; 0.000; 0.0000
Filter:
Selectable 0.5 ÷ 1000 Hz
Keyboard:
4 capacitive buttons
Power tool:
12-24 Vdc ± 15% - absorbed power 5 W
Operating temperature:
-10 / + 50 ° C (max 85% relative humidity without condensation)
Storage temperature:
-20 / + 70 ° C
Logic outputs:
2 optoisolated; MAX 24 Vdc / 100mA cad
Logic inputs:
2 optoisolated PNP at 24 VDC (external power supply)
Serial Ports:
1 USB device + 1 + 1 RS232C RS485 / Fieldbus; ASCII protocol or Modbus RTU
Peak Hold function:
for dynamic measurements
Analog output:
optoisolated 16-Bit Voltage: 0 ÷ 5/10 V (R min10 K Ohm), Current: 0/4 ÷ 20 mA (R max 300 Ohm).
Linearity analogue output:
<0.02% FS
Thermal analog output drift:
0.001% FS / ° C
Microcontroller:
ARM Cortex M0 + 32-bit, 256KB Flash reprogrammable on-board USB
Data storage:
64 Kbytes expandable up to 1024 Kbytes
Regulatory Compliance:
EN61000-6-2, EN61000-6-3 EMC; EN61010-1 for Electrical Safety
Electric connections:
Removable screw terminal blocks 5 mm pitch
VIDEO
Futek LSB200 with Pavone Sistemi DAT1400
VIDEO
DAT1400 - THEROTICAL CALIBRATION
VIDEO
DAT1400 - CALIBRATION WITH A PROOF WEIGHT
DAT 1400
Weighing Instrumentation Weight Transmitters
Acquisition frequency signal A / DC up to 1000 Hz
DATALOGGER function (optional)
Capacitive keyboard
Bus contemporary Availability of Field and Analog Output
Removable screw terminal blocks
Mounting Type: DINRAIL & front panels (optional)
All Bus Available range: Profinet, EtherCAT, Ethernet IP, Ethernet
Future Options: - Two weighing channels indipendenti
- Analog voltage input or current
- Connection (RS485 and power supply) to I-BOX external
TECHNICAL DAT 1400
Power tool:
12-24 Vdc ± 15% - absorbed power 5 W
Measuring range:
÷ -3.9 +3.9 mV / V
Input sensitivity:
00:02 MicroV / div
Linearity:
<0.01% FS
Thermal drift:
<0.001% FS / ° C
Display:
6 digits, red 7-segment LED, height 14mm
A / D converter:
24-bit
Internal resolution:
> 16,000,000 points
Signal Acquisition frequency:
12 to 1000 Hz
Viewable resolution:
999,999 displayable divisions on net weight
Divisions value (selectable):
x1, x2, x5, x10, x20, x50
Set Decimal:
0.0; 0:00; 0.000; 0.0000
Filter:
Selectable 0.5 ÷ 1000 Hz
Keyboard:
4 capacitive buttons
load cells Power supply:
5 Vdc (max 8 350-Ohm load cells in all)
Operating temperature:
-10 / + 50 ° C (max 85% relative humidity without condensation)
Storage temperature:
-20 / + 70 ° C
Logic outputs:
2 optoisolated; MAX 24 Vdc / 100mA cad
Logic inputs:
2 optoisolated PNP at 24 VDC (external power supply)
Serial Ports:
1 USB device + 1 + 1 RS232C RS485 / Fieldbus; ASCII protocol or Modbus RTU
Peak Hold function:
for dynamic measurements
Optional analog output:
optoisolated 16-Bit Voltage: 0 ÷ 5/10 V (R min10 K Ohm), Current: 0/4 ÷ 20 mA (R max 300 Ohm).
Linearity analogue output:
<0.02% FS
Thermal analog output drift:
0.001% FS / ° C
Microcontroller:
ARM Cortex M0 + 32-bit, 256KB Flash reprogrammable on-board USB
Data storage:
64 Kbytes expandable to 1024 Kbytes (option)
Regulatory Compliance:
EN61000-6-2, EN61000-6-3 EMC; EN61010-1 for Electrical Safety
Electric connections:
Removable screw terminal blocks 5 mm pitch
VIDEO
Pavone Sistemi was founded in 1963 and the company went through all levels of technological developments.
Today Pavone Sistemi provides integrated solutions for weighing, process control and measurement. Their wide range of products and systems, including those developed internally and world-wide traded, guarantees every kind of weighing and measurement project for all industrial applications: steel mill, metallurgy, paints, tanneries, concrete mill, paper mill, glass industry, pharmaceutical, chemical, petrochemical, food & beverage and packaging.
Pavone Sistemi's product range include pallet weighing, crane scales, beam weighing, weighing platforms. They have also manufactured simple yet advanced weighing indicators that are very user-friendly and packed with enough power to get the job done.
Their mission is to offer products and services - ensuring the best accuracy, reliability and repeatability for every measurement.
